Tender For Permanent Restoration Of Road T01-Tikibagh, Package No. Jk13-120.
Tender Value
32 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
3 days left
EMD
64000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Restoration Of Road T01-Tikibagh, Package No. Jk13-120.
BOQ
| Sl. No. | Item Description |
| 1 | CC Drain |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soil |
| 3 | Carriage of excavated earth beyond an initial disposal lead of 50m by way of engagement of tipper/ Tractor for disposal and clearance of accumulated excavated earthwork from trenches, streams, causeway, culverts including its disposal to dumping site as designated by Engineer- in Chief within 1Km |
| 4 | Laying (First Class Type B) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii) including Carriage |
| 5 | (CEMENT CONCRETE CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including all carriages of material involved |
| 6 | (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including all carriages of material involved |
| 7 | Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mm nominal size stone aggregate including all carriages of material involved. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 9 | Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 Including loading, unloading,haulages, royality,octroi charges, form work etc complete. |
| 10 | Providing and laying 300mm dia M.S pipe for cross drainage works and other water disposal pipes in built up areas at required spots including earth work and laying of pipes in required slope, jointing/ testing of pipes i/c providing necessary cusion complete job |
| 11 | Renewal coat |
| 12 | Scarifying th existing bituminous road surface to the depth of 50mm and disposal of scarified material within all lifts and lead upto 1 KM (mechanical means) |
| 13 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. including carriage |
| 14 | Providing and applying tack coat with bitumen emulsion(RS-1)using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.2 On bitumen surface @ 0.50 Kg/sqm. including carriage |
| 15 | Bituminous Macdam(50mm):Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-10 prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.including carriage |
| 16 | Semi Dense Bituminous Macdam(25 mm): Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG10 prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. including carriage |
| 17 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.including carriage |
| 18 | Hard shoulder: Providing Laying, spreadingand compacting stone aggregates of specified sizes of water bound macadam specification including spreading in uniformthickness, hand packing, rolling with three wheel 80-100 KN static roller in stages in proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarseaggregate watering and compacting to required density Grading 2 as per Technical Specification (Manual Means) |
| 19 | Repainting:- Maintenance of road signs by way of cleaning and repainting of mandatory/ regulatory/ causionary/ informatory and place identifications sign board oas per drawings and technical specifications |
| 20 | Providing & Laying 2.5mm thick road marking strips reto-reflective of specified shade/ color using hot thermoplastic material by fully/ semiautomatic paint applicator maachine fitted with profile shoe glass beads dispenser, propane tank heater and profile shoe heater |
| 21 | Total Construction cost without GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender