Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Manufacturing Unit; E 5435 Overhauling, Repair, Calibration And Testing Of Id Fan Turbine Pgd Governor Of Woodward Make In Ammonia-V Plant Of Rcf Tr
Tender Overview
Project Description
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Manufacturing Unit; E 5435 Overhauling, Repair, Calibration And Testing Of Id Fan Turbine Pgd Governor Of Woodward Make In Ammonia-V Plant Of Rcf Trombay Unit; As Per Sc.. - Lump Sum Charges For Overhauling, Calibration And Testing Of Id Fan Turbine Woodward Make Pgd Governor, Excluding The Cost Of Spares. , Lump Sum Charges Only For Calibration & Testing Of Id Fan Turbine Woodward Make Pgd Governor , Per Diem Rate For Deputation Of Service Engineer At Site For Attending Id Fan Turbine Woodward Make Pgd Governor , Cost Of Mandatory And Anticipatory Spares For Id Fan Turbine Pgd Governor Of Woodward Make As Per Spares Price Break Up List As Mentioned Below , Kit - Pgd W/29 Ft.Lb. Servo Repair , Ballarm - Pg , Plunger - Pg Pilot Valve(Positive Lap) , Spring - Pg Buffer (7.2 Lb) , Nut - .625 18 Castellated , Key - .187 Square , Pin - Cotter,(T-148),.125 Dia,1.500 Long,Stl , Ring - Ext Ret,(T-144),.375 Shaft Dia,Stl , Ring - Ext Ret,(T-144),.250 Shaft Dia,Stl , Pin - Roll,(T-134),.125 Dia,.750 Long,Sst , O Ring - Viton,(T-078),2-036,.070 W,2.364 Id , O Ring - Viton,(T-078),2-040,.070 W,2.864 Id , O Ring - Viton,(T-078),2-009,.070 W,.208 Id , Seal - Stat-O,(T-254),.312 Id,.603 Od,.050 Thk,B , Seal - Oil(.625 Shaft Dia,1.128 Od,.250 Thk,Nit , Wiper - Scraper(.625 Shaft Dia,1.129 Od,.312 , Cock - Drain , Piston - Pg Buffer(1.750 Long) , Pin - Headed W/ Snap Ring Groove (Pg Ballhea , Retainer - Oil Seal , Shaft - Drive(Alco,.625 Keyed,8.250 Long) , Gear - Pg Drive(.562 Thick) , Gear - Pg Idler (.562 Thick) , Valve - Pg Rotation Check(Inlet) , Shaft – Dial , Knob - Bakelite Control , Gauge - Pg Oil (Standard, Weatherproof,Alu , Valve - Pg Comp. Needle(Slotted Head)
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Lump sum charges for overhauling, calibration and testing of ID Fan Turbine Woodward make PGD Governor, excluding the cost of spares. | Lump sum charges for overhauling, calibration and testing of ID Fan Turbine Woodward make PGD Governor, excluding the cost of spares. |
| 2 | Lump sum charges only for calibration & testing of ID Fan Turbine Woodward make PGD governor | Lump sum charges only for calibration & testing of ID Fan Turbine Woodward make PGD governor |
| 3 | Per diem rate for deputation of service engineer at site for attending ID Fan Turbine Woodward make PGD Governor | Per diem rate for deputation of service engineer at site for attending ID Fan Turbine Woodward make PGD Governor |
| 4 | Cost of mandatory and anticipatory spares for ID Fan Turbine PGD Governor of Woodward make as per spares price break up list as mentioned below | Cost of mandatory and anticipatory spares for ID Fan Turbine PGD Governor of Woodward make as per spares price break up list as mentioned below |
| 5 | KIT - PGD W/29 FT.LB. SERVO REPAIR | KIT - PGD W/29 FT.LB. SERVO REPAIR |
| 6 | BALLARM - PG | BALLARM - PG |
| 7 | PLUNGER - PG PILOT VALVE(POSITIVE LAP) | PLUNGER - PG PILOT VALVE(POSITIVE LAP) |
| 8 | SPRING - PG BUFFER (7.2 LB) | SPRING - PG BUFFER (7.2 LB) |
| 9 | NUT - .625 18 CASTELLATED | NUT - .625 18 CASTELLATED |
| 10 | KEY - .187 SQUARE | KEY - .187 SQUARE |
| 11 | PIN - COTTER,(T-148),.125 DIA,1.500 LONG,STL | PIN - COTTER,(T-148),.125 DIA,1.500 LONG,STL |
| 12 | RING - EXT RET,(T-144),.375 SHAFT DIA,STL | RING - EXT RET,(T-144),.375 SHAFT DIA,STL |
| 13 | RING - EXT RET,(T-144),.250 SHAFT DIA,STL | RING - EXT RET,(T-144),.250 SHAFT DIA,STL |
| 14 | PIN - ROLL,(T-134),.125 DIA,.750 LONG,SST | PIN - ROLL,(T-134),.125 DIA,.750 LONG,SST |
| 15 | O RING - VITON,(T-078),2-036,.070 W,2.364 ID | O RING - VITON,(T-078),2-036,.070 W,2.364 ID |
| 16 | O RING - VITON,(T-078),2-040,.070 W,2.864 ID | O RING - VITON,(T-078),2-040,.070 W,2.864 ID |
| 17 | O RING - VITON,(T-078),2-009,.070 W,.208 ID | O RING - VITON,(T-078),2-009,.070 W,.208 ID |
| 18 | SEAL - STAT-O,(T-254),.312 ID,.603 OD,.050 THK,B | SEAL - STAT-O,(T-254),.312 ID,.603 OD,.050 THK,B |
| 19 | SEAL - OIL(.625 SHAFT DIA,1.128 OD,.250 THK,NIT | SEAL - OIL(.625 SHAFT DIA,1.128 OD,.250 THK,NIT |
| 20 | WIPER - SCRAPER(.625 SHAFT DIA,1.129 OD,.312 | WIPER - SCRAPER(.625 SHAFT DIA,1.129 OD,.312 |
| 21 | COCK - DRAIN | COCK - DRAIN |
| 22 | PISTON - PG BUFFER(1.750 LONG) | PISTON - PG BUFFER(1.750 LONG) |
| 23 | PIN - HEADED W/ SNAP RING GROOVE (PG BALLHEA | PIN - HEADED W/ SNAP RING GROOVE (PG BALLHEA |
| 24 | RETAINER - OIL SEAL | RETAINER - OIL SEAL |
| 25 | SHAFT - DRIVE(ALCO,.625 KEYED,8.250 LONG) | SHAFT - DRIVE(ALCO,.625 KEYED,8.250 LONG) |
| 26 | GEAR - PG DRIVE(.562 THICK) | GEAR - PG DRIVE(.562 THICK) |
| 27 | GEAR - PG IDLER (.562 THICK) | GEAR - PG IDLER (.562 THICK) |
| 28 | VALVE - PG ROTATION CHECK(INLET) | VALVE - PG ROTATION CHECK(INLET) |
| 29 | SHAFT – DIAL | SHAFT – DIAL |
| 30 | KNOB - BAKELITE CONTROL | KNOB - BAKELITE CONTROL |
| 31 | GAUGE - PG OIL (STANDARD, WEATHERPROOF,ALU | GAUGE - PG OIL (STANDARD, WEATHERPROOF,ALU |
| 32 | VALVE - PG COMP. NEEDLE(SLOTTED HEAD) | VALVE - PG COMP. NEEDLE(SLOTTED HEAD) |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender