Tender For Name Of Work :- Design Manufacturing Supply Replacement 0Installation Erection Commissioning And Trial Run Of Pump Transformers And Eot Crane Along With Renovation Electrification Of Pump Buildings And Construction Of Store Rooms For Pumpi
Tender Value
13.99 Crore
Estimated cost
Bid Submission
07 Aug 2026
10 days left
EMD
27.98 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work :- Design Manufacturing Supply Replacement 0Installation Erection Commissioning And Trial Run Of Pump Transformers And Eot Crane Along With Renovation Electrification Of Pump Buildings And Construction Of Store Rooms For Pumping Stations Of Kanwarsen Lift Canal During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Rajiasar PS-I A). Pump and Bowl Assemblies:- |
| 2 | S I T C of Vertical wet well type pump complete with Bowl assembely,column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing,pressure gauges, Bearing temperature gauge, sole plate conforming to IS:1710 & min. efficiency not less than 87% at Rated discharge and StaticHead complete with all accessories as per specification & approved make,carrying of third party inspection, transporation up to site, loading,unloading, erection, commissioning, Testing , Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSR2.81 cumec/100 cusec (17 to 20 meter) |
| 3 | SITC of Complete Discharge bowl assembly conforming to IS: 1710 &min. efficiency not less than 87% having Rated discharge capacity andtotal static head complete with all accessories as per specification &approved make , including work of dismantaling of existing pump ,providing and replacement of Top shaft, intermediate shaft, various shaftsleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys,High tensile Nut bolts for complete pump, and carrying of third partyinspection, transporation up to site, loading, unloading, erection,commissioning Testing ,Three month trial run & one year defect liability.For Additional technical 100 CS (17 to 20 meter) |
| 4 | S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS: 1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning, Testing , Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSRFor static head 17 meter to 20 meterDesign discharge 2.12/2.15 cumec |
| 5 | SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSRFor static head 17 meter to 20 meterDesign discharge 2.12/2.15 cumec |
| 6 | B). Motor, Transfromers and EOT cranes :- |
| 7 | S I T C of Copper wound Power Transformer conforming to IS: 2026 with latest amendments & Losses as per ISI of rating 33/3.3 KV ONAN type, Delta-Star Connected, Vector Group Dyn 11, 50 Hz frequency, standard accessories like conservator, silica gel breather, radiator, fins, HT bushing & LT cable boxes, Off/On -LTC (+/- 7.5% in steps of 2.5%) winding/oil temperature rise of 50/55 C, ISI marked drain valve, Dial type Temperature gauge, first fill of oil, Epoxy based paint, including carrying of third party inspection, erection, Testing, commissioning , trial run & one year defect liability.(7500 KVA) |
| 8 | C). Spare parts of pump, panel and switch yard :- |
| 9 | Providing and fixing of Gland packing Box for VT pump complete with all accessories likeGrease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) ,water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fittingof new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter |
| 10 | Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. (Excluding Bearings)2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter |
| 11 | Providing and fixing of Syphon Breaker valve on existing delivery pipe and civil structure, removing of old valves, testing, painting.for Delievery pipe size including and upto 1000 mm |
| 12 | Providing and fixing of Syphon Breaker valve on existing delivery pipe and civil structure, removing of old valves, testing, painting for Delivery pipe size above 1000 mm |
| 13 | Supply of P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper Power cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964,of purity >99.7 %, round /flat strip armourin, Inner / outer sheath confirming to IS:5831 4C X 10 Sq. mm |
| 14 | Providing and fixing of Cable Trench Cover Fabricated by 5 mm MS chequered plate and MS angle to required size and fitting in existing trench with necessary holes for lifting, trimming of edge and finishing. |
| 15 | Providing and fixing of 33KV,Outdoor Current Transformer ,Oil filled (live tank type), vacuum impregnated, twin core with following ratio with accessories confirmed to IS 2705 with latest amendments 200/5-5A accuracy class 0.5, Burden-15VA & 5P10, STC-25 KA |
| 16 | Providing and fixing of 36 KV,Outdoor Voltage Transformer , ratio 33000/√3/110/√3 volt accuracy class 0.5 5P10 Burden 100 VA,Duration 1.5 for 30 sec Oil filled (live tank type), vacuum impregnated, twin core with accessories confirmed to IS 3156 with latest amendments |
| 17 | Providing & fixing of 33KV, 400 to 800 Amp Isolator/GO Switch with Earth |
| 18 | Providing and Fixing of Vacuum Circuit Breaker (VCB) 6.6 KV or 3.3 KV 1250 Amp draw out type Complete Trolley for existing VCB panel |
| 19 | Providing and Fixing of Epoxy resin cast twin core 3.3 KV Indoor Current Transformer of below mentioned Ratio and accuracy Class metering 0.5, protection -5P10, Burden 15VA, confirmed to IS 2705-1992 200/5-5 A, STC 18.4KA/1 sec |
| 20 | Providing and Fixing of Epoxy resin cast twin core 3.3 KV Indoor Current Transformer of below mentioned Ratio and accuracy Class metering 0.5, protection -5P10, Burden 15VA, confirmed to IS 2705-1992 800/5-5 A, STC 18.4KA/1 sec |
| 21 | Providing and fixing of Dry type Resin Cast Epoxy Single Phase Potential Transformer (PT) of Rating 3.3KV/√3/110/√3, Burden 100 VA Class 5P10 |
| 22 | Providing and Fixing of 8 Channel temperature scanner input J/K/Pt100/RTD output: 4 Relay+ RS 485 mod bus communication in Panel including making connections ,testing at site |
| 23 | Supply of Column pipe for VT pump complete matching with existing system and as per preapproved design drawings (Material M.S.) 2.12/2.81 cumec (75/100 cusec) pump of static head17 to 20 meter |
| 24 | Supply of motor pully (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 25 | Supply of Pump pully (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 26 | Supply of impeller shaft fitted with shaft sleeves for following rating pump 100 cusec 2.12/2.81 cumec (100 cusec) pump of static head 17 to 20 meter (material SS-410) |
| 27 | Supply of intermidiate shaft fitted with shaft sleeves for following rating 2.12/2.81 cumec (100 cusec) pump of static head 17 to 20 meter pump (material SS-410) |
| 28 | Supply of Top shaft fitted with shaft sleeves for following rating pump 2.12/2.81 cumec (100 cusec) pump of static head 17 to 20 meter (material SS-410) |
| 29 | Supply of muff coupler including thrust coller halfs, Coupler cap, key,allen HEAD CAP screws etc as per existing design material SS 410 Inner Diameter 86-99 mm |
| 30 | Hire charges Hydra crane 8 to 10 tone capacity With POL and operator etc |
| 31 | Malkisar PS-IIA). Pump and Bowl Assemblies:- |
| 32 | \\"S I T C of Vertical wet well type pump complete with Bowl assembely,column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing,pressure gauges, Bearing temperature gauge, sole plate conforming to IS:1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make,carrying of third party inspection, transporation up to site, loading,unloading, erection, commissioning, Testing , Three month trial run & oneyear defect liability. For Additional technical parameters of product / workrefer Annexure 'A' attached with this BSR For static head 4 meter to 6 meter 3.14 cumec |
| 33 | \\"SITC of Complete Discharge bowl assembly conforming to IS: 1710 &min. efficiency not less than 87% having Rated discharge capacity andtotal static head complete with all accessories as per specification &approved make , including work of dismantaling of existing pump ,providing and replacement of Top shaft, intermediate shaft, various shaftsleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys,High tensile Nut bolts for complete pump, and carrying of third partyinspection, transporation up to site, loading, unloading, erection,commissioning Testing ,Three month trial run & one year defect liability.For Additional technical For static head 4 meter to 6 meter 3.14 cumec |
| 34 | SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSRFor static head 4 meter to 6 meterDesign discharge 1.70 cumecs |
| 35 | B). Motor, Transfromers and EOT cranes :- |
| 36 | C). Spare parts of pump,panel and switch yard |
| 37 | Providing and fixing of Gland packing Box for VT pump complete with all accessories like Grease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) , water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fittingof new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter |
| 38 | Providing and fixing of Gland packing Box for VT pump complete with all accessories like Grease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) , water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fittingof new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 1 to2.15 cumec pump of static head 9 to 12 meter |
| 39 | Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. (Excluding Bearings)2.45/2.81/3.14 cumec pump of static head 4 to 8 meter |
| 40 | Providing and fixing of Cable Trench Cover Fabricated by 5 mm MS chequered plate and MS angle to required size and fitting in existing trench with necessary holes for lifting, trimming of edge and finishing. |
| 41 | Hire of hydra for transformer shifting of 5000 kva and shifting of material from pump |
| 42 | Supply of Column pipe for VT pump complete matching with existing system and as per pre approved design drawings (Material M.S.) 2.45/2.81/3.14 cumec pump of static head 4 to 8 mete |
| 43 | Supply of motor pully (coupling) with coupling nut and bolts, keys (tocouple VT Pump with motor) |
| 44 | Supply of Pump pully (coupling) with coupling nut and bolts, keys (tocouple VT Pump with motor) |
| 45 | Supply of impeller shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter |
| 46 | Supply of intermediate shaft fitted with shaft sleeves for following rating pump (material SS410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter |
| 47 | Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter |
| 48 | Supply of muff coupler including thrust collar halfs, Coupler cap, key, allen HEAD CAP screws etc as per existing design material SS 410 Inner Diameter 86-99 mm |
| 49 | Khara PS-IIIA). Pump and Bowl assemblies:- |
| 50 | S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS: 1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying ofthird party inspection, transportation up to site, loading, unloading, erection, commissioning,Testing , Three month trial run & one year defect liability. For Additional technical parameters ofproduct For static head 14 meter to 16 meter Design discharge 1.13 cumecs |
| 51 | S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS: 1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying ofthird party inspection, transportation up to site, loading, unloading, erection, commissioning,Testing , Three month trial run & one year defect liability. For Additional technical parameters ofproduct For static head 14 meter to 16 meter Design discharge 0.57 cumecs |
| 52 | SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump, providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product. For static head 14 meter to 16 meter Design discharge 0.57 cumecs |
| 53 | B). Motor, Transformer and E.O.T. crane:- |
| 54 | SITC of double girder box indoor type EOT crane having 7 metres span& 12-15 metres lift, pendent operated from floor, complete with allaccessories as per specification & approved make confirming to IS:3177,3998,807,transporation, loading, unloading, erection,commissioning, Testing at site & one year defect liabilitySWL 10 tonne capacity |
| 55 | C). Spare parts of pump, panel and switch yard:- |
| 56 | Providing and fixing of Gland packing Box for VT pump complete withall accessories like Grease cup with NRV, packing pieces, gland bush(Gun metal) ,Gland Box cap (gun metal) , water slinger assembly (C.I.),gasket etc, Decoupling of motor, removing of motor from stool, removingof coupling and bearing hub assembly, dismantling existing gland box from pump, fitting of new Gland packing Box , recoupling and fitting ofmotor on stool, testing and trial of pump. Up to 1.13 (40 cusec) pump of static head 14 to 16 meter |
| 57 | Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer,adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testingand trial of pump, work shall be carried out as per pre approved designdrawings. (Excluding Bearings)Up to 1.13 (40 cusec) pump of static head 14 to 16 meter |
| 58 | Providing and Fixing of Vacuum Circuit Breaker (VCB) 6.6 KV or 3.3KV 630 Amp draw out type Complete Trolley for existing VCB panel |
| 59 | Providing and fixing of 33KV,Outdoor Current Transformer ,Oil filled (live tank type), vacuum impregnated, twin core with following ratio with accessories confirmed to IS 2705 with latest amendments 200/5-5A accuracy class 0.5, Burden-15VA & 5P10, STC-25 KA |
| 60 | Providing and fixing of 36 KV,Outdoor Voltage Transformer , ratio 33000/√3/110/√3 volt accuracy class 0.5 5P10 Burden 100 VA,Duration 1.5 for 30 sec Oil filled (live tank type), vacuum impregnated, twin core with accessories confirmed to IS 3156 with latest amendments |
| 61 | Providing and Fixing of Vacuum Circuit Breaker (VCB) 6.6 KV or 3.3 KV 1250 Amp draw out type Complete Trolley for existing VCB panel |
| 62 | Supply of motor pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 63 | Supply of Pump pully (coupling) with coupling nut and bolts, keys (tocouple VT Pump with motor) |
| 64 | Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410)Up to 1.13 (40 cusec) pump of static head 17 to 20 meter |
| 65 | Supply of intermediate shaft fitted with shaft sleeves for following rating pump (material SS-410)Up to 1.13 (40 cusec) pump of static head 17 to 20 meter |
| 66 | Supply of impeller shaft fitted with shaft sleeves for following rating pump (material SS-410)Up to 1.13 (40 cusec) pump of static head 17 to 20 meter |
| 67 | Supply of muff coupler including thrust collar halfs, Coupler cap, key, Allen HEAD CAP screws etc as per existing design material SS 410 Inner Diameter 50-70 mm |
| 68 | Hussangsar PS-IVA). Pump and Bowl assemblies:- |
| 69 | S I T C of Vertical wet well type pump complete with Bowl assembly,column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing,pressure gauges, Bearing temperature gauge, sole plate conforming to IS:1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying of third party inspection, transportation up to site, loading,unloading, erection, commissioning, Testing , Three month trial run &one year defect liability. For Additional technical parameters of product /work refer Annexure 'A' attached with this BSR Design discharge 1.13 cumecs (Static Head 17 to 20 m) |
| 70 | S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS: 1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying ofthird party inspection, transportation up to site, loading, unloading, erection, commissioning,Testing , Three month trial run & one year defect liability. For Additional technical parameters ofproduct For static head 17 meter to 20 meter Design discharge 0.57 cumecs |
| 71 | SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump, providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product. For static head 17 meter to 20 meter Design discharge 0.57 cumecs |
| 72 | B). Motor, Transformer and E.O.T. crane:- |
| 73 | SITC of double girder box indoor type EOT crane having 7 metres span& 12-15 metres lift, pendent operated from floor, complete with all accessories as per specification & approved make confirming to IS:3177,3998,807, transporation, loading, unloading, erection,commissioning, Testing at site & one year defect liabilitySWL 10 tonne capacity |
| 74 | C). Spare parts of pump,panel and switch yard :- |
| 75 | \\"Providing and fixing of Gland packing Box for VT pump complete withall accessories like Grease cup with NRV, packing pieces, gland bush(Gun metal) ,Gland Box cap (gun metal) , water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from sool, removingof coupling and bearing hub assembly, dismantling existing gland box from pump, fitting of new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump.\\" Up to 1.13 cumec (40 cusec) pump of static head 17 to 20 meter |
| 76 | \\"Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer,adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oilfill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor fromstool, removing of coupling and bearing hub assembly, fitting of newThrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved designdrawings. (Excluding Bearings)Up to 1.13 (40 cusec) pump of static head 14 to 16 meter\\" |
| 77 | Providing and fixing of 33KV,Outdoor Current Transformer ,Oil filled (live tank type), vacuum impregnated, twin core with following ratio with accessories confirmed to IS 2705 with latest amendments 200/5-5A accuracy class 0.5, Burden-15VA & 5P10, STC-25 KA |
| 78 | Providing and fixing of 36 KV,Outdoor Voltage Transformer , ratio 33000/√3/110/√3 volt accuracy class 0.5 5P10 Burden 100 VA,Duration 1.5 for 30 sec Oil filled (live tank type), vacuum impregnated, twin core with accessories confirmed to IS 3156 with latest amendments |
| 79 | Providing and Fixing of Vacuum Circuit Breaker (VCB) 6.6 KV or 3.3 KV 1250 Amp draw out type Complete Trolley for existing VCB panel |
| 80 | Supply of motor pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 81 | Supply of Pump pully (coupling) with coupling nut and bolts, keys (tocouple VT Pump with motor) |
| 82 | Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410) Up to 1.13 (40 cusec) pump of static head 14 to 16 meter |
| 83 | Supply of intermediate shaft fitted with shaft sleeves for following rating pump (material SS-410) Up to 1.13 (40 cusec) pump of static head 14 to 16 meter |
| 84 | Supply of impeller shaft fitted with shaft sleeves for following rating pump (material SS-410) Up to 1.13 (40 cusec) pump of static head 14 to 16 meter |
| 85 | Supply of muff coupler including thrust collar halfs, Coupler cap, key, Allen HEAD CAP screws etc as per existing design material SS 410 Inner Diameter 50-70 mm |
| 86 | (D) Operation and maintenance of pumping stations :- |
| 87 | Operation & maintenance of Pumping Station having pump unitsrunning on HT power supply, including routine repair & maintenanceof pumping machinary i.e. VT pump & HT motors with accessories,HT and LT panel of all types, switchyard equipments, varioustransformers, EOT crane etc. ( PS I Rajiasar) |
| 88 | Operation & maintenance of Pumping Station having pump unitsrunning on HT power supply, including routine repair & maintenanceof pumping machinary i.e. VT pump & HT motors with accessories,HT and LT panel of all types, switchyard equipments, varioustransformers, EOT crane etc. ( PS II Malkisar) |
| 89 | Operation & maintenance of Pumping Station having pump units running on HT power supply, including routine repair & maintenanceof pumping machinary i.e. VT pump & HT motors with accessories,HT and LT panel of all types, switchyard equipments, varioust ransformers, EOT crane etc. ( PS III Khara) |
| 90 | Operation & maintenance of Pumping Station having pump units running on HT power supply, including routine repair & maintenance of pumping machinary i.e. VT pump & HT motors with accessories,HT and LT panel of all types, switchyard equipments, various transformers, EOT crane etc. ( PS IV Hussangsar) |
| 91 | E) Construction of stores, renovation and Electrification work |
| 92 | Earthwork excavation in foundation, trenches or drains (not exceeding 1.5 m in width ) including dressing of sides and ramming of bottom lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m all kind of soil |
| 93 | Dismantling of cement concrete and disposal of material with in a lead of 50 m Concrete 1:4:8 or richer |
| 94 | Providing and laying cement concreting including curing, compaction etc. complete using stone aggregate 20 mm nominal size in foundation and plinth, excluding cost of shuttering using.M-10 grade mix 1:3:6 (1cement : coarse sand : 6 graded stone aggregate) |
| 95 | Brick masonary in foundation and plinth with brick designation 75 In cement sand mortar 1:5 |
| 96 | For using brick class designation 100 instead of class designation 75 |
| 97 | Extra for brickwork in superstructure above plinth level for every 5m and part thereof |
| 98 | Extra for brickwork in superstructure above plinth level for every 5m and part thereof |
| 99 | Centering & shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of form work for foundation in basement rafts beam, bases of columns etc up to plinth level including material. |
| 100 | Centering & shuttering with plywood or steel sheet including strutting, propping, bracing both ways with wooden members and removal of form work for superstructure up to 4.5 mtr. height above plinth level including material Suspended floors, roofs, landings, staircases, landing, balconies, girders, cantilevers, bands, coping , bed plates, anchor blocks, sills, chajjas etc. |
| 101 | Centering & shuttering with plywood or steel sheet including strutting, propping, bracing both ways with wooden members and removal of form work for superstructure up to 4.5 mtr. height above plinth level including material Columns , pillers, posts and struts etc. |
| 102 | P/L cement concrete in R.C.C. work for suspended floors, roofs, girders, cantilevers, stair cases, landing, balconies,shelves,chajja's, lintels bands, coping, bed plates, anchor blocks, sills & beams etc. in super structure up to floor three level including curing compaction finishing with rendering in cement sand mortar 1:3(1 cement :3 coarse sand ) & making good the joints excluding cost of shuttering and centering & reinforcement. M-20 grade mix 1:1½:3 ( 1 Cement :1 Coarse sand : 2 graded stone aggregate 20 mm nominal sand size) Add extra over item 5 to 6 for each ubsequent height of 4.5m or part thereof |
| 103 | P/L reinforced cement concrete in wall (any thickness) including attached pilasters, buttresses, plinth, string courses, kerbs and fillets, columns, pillers, piers, abutments, posts and struts etc. in super structure up to floor three level including curing compaction finishing with rendering in cement sand mortar 1:3 (1 cement :3 coarse sand ) & making good the joints excluding cost of shuttering and centering & reinforcement M-20 grade mix.1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size ). M-25 grade mix 1:1:2 ( 1cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size. |
| 104 | P/L cement concrete in R.C.C. work for suspended floors, roofs, girders, cantilevers, stair cases, landing, balconies,shelves,chajja's, lintels bands, coping, bed plates, anchor blocks, sills & beams etc. in super structure up to floor three level including curing compaction finishing with rendering in cement sand mortar 1:3(1 cement :3 coarse sand ) & making good the joints excluding cost of shuttering and centering & reinforcement. M-15 grade mix 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size. |
| 105 | Providing and fabricating steel reinforcement for R.C.C. work including straightening, cutting bending, placing in position and bindings complete including cost of binding wire in foundation and super structure 4.5 mtr. height above plinth level. Hot rolled deformed (IS 1139) cold twisted (IS : 1786) bars. |
| 106 | Cement plaster with cement sand mortar (1:4) including racking of joints, smooth finishing and curing etc.complete including all leads of all construction materails of thickness12 mm thick in 1 coats. |
| 107 | Providing and Fixing of ISI marked PVC storage tank of following capacity as per IS: 12701-1989 with cover, overflow pipe, including Float valve IS 1703 marked with rod and PVC ball complete1000 litres capacity |
| 108 | Hire charges of JCB Machine with POL and Operator |
| 109 | Providing and Fixing of Shrouded Bus Bar (GI) type DSL system for EOT crane |
| 110 | Providing and Fixing of Rail for Long travel of EOT crane for both side bay length |
| 111 | Providing and Fixing unplasticised (UPVC) SWR pipes type B FOR SCILAND waste discharge system (is:13592:1992 mark) of approved quailty /make (i) single socketed pipes Tpye B 110 mm dia |
| 112 | P & F 1st quality Vitrified tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. : size 600 mm X 600 mm . |
| 113 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 250mm x 375mm |
| 114 | Crazy marble stone flooring 20mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4 : 7 (4cement : 7 white black or white or black marble chips) size from 1mm to 4mm by volume and under layer of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm nominal size] rubbing and polishing and cement slurry etc. complete : In ordinary cement. |
| 115 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick |
| 116 | Providing & fixing steel glazed doors, windows and ventilators with shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. |
| 117 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete. |
| 118 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25mmx25mmx2.10mm |
| 119 | Providing and fixing T-iron frames for doors window and ventilators of mild steel tee-sections, joints mitered and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement :3 course sand : 6 graded stone aggregate 20mm nominal size) or with wooden plug and screw or rawl plugs and screws of with fixing clips or with bolts and nuts as require including fixing of necessary but hinges and screw and applying a priming coat of approved steel primer. |
| 120 | Providing and fixing MS sheet 1mm thick single doors shutter in angle iron frame 35 x35 x5mm suitably diagonally braced with 25 x3mm flat iron above and below lock rail of size 50 x5mm beading extra including all fitting, as per direction of Engineer Incharge but excluding cost of Chowkhats : including two coats of anti corrosive red oxide primer paint MS sheet 22 S.W.G |
| 121 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 75x 75mm |
| 122 | Providing and fixing in cement sand mortar 1 : 4 double paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm |
| 123 | P&F external grade board solid core single / Double leaf flush door shutter IS : 2202 ( part -2) 1996 marked using phenole formel dehyderesin in glue both side with approved stainless steel fitting complete as per annxure' A' : 30 mm thick commercial vaneer both side . |
| 124 | Distempering with 1st quality Acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete including all scaffolding as per manufacturers specification. Two or more coats on new work including preparation of base with primer, putty, lippy etc. complete in all respect. |
| 125 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :(1) two or more coats on new work |
| 126 | Finishing walls with Acrylic smooth exterior paint of required shade including all scaffolding. New work(Two or more coat applied @ 1.67 Ltr./10 sqm over and including base coat of water proofing cement paint [email protected] kg/10sqm). |
| 127 | Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 5 mm |
| 128 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248- 1979. (Clear openable area to be measured for payment).Add extra 9.15.2 Exceeding 16.80 Sqm in the area. |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 20 mm nominal dia |
| 130 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Enternal work Exposed on wall). 20 mm nominal dia |
| 131 | single tee with door 110 mm dia |
| 132 | single bend with door 87.5 degree 110 mm dia . |
| 133 | P&F wvc wash basin ( 1st qlty IS : 2556 mark ) of approved make with C.I brackets duly painted one no's 15 mm CP pillar cock ( IS : 8934 mark ) and 25 mm CP brass waste coupling of approved make 32mm waste pipe complete including cutting and making good the wall : size 580mm*450mm dia for counter top. |
| 134 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor . |
| 135 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: |
| 136 | P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of approved make fitting, siphon with copper tube, C.I. brackets complete including cutting and making good the wall : WVC Automatic flushing cistern - 10 Litre Capacity. |
| 137 | P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC. |
| 138 | P & F bib cock (IS:8934 Mark), superior quality of approved make : C.P. bib cock fancy type , 15 mm nominal bore . |
| 139 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore. |
| 140 | P & F Inlet Connection (Angle Valves) Superior quality,of approved make, for Wash basin,Gyser etc.: C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
| 141 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.. |
| 142 | Construction of chamber in all type of soil with 230/300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 450 X 450 mm depth upto 0.5 M Cement cover with frame. |
| 143 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 144 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge (b) Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 145 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 146 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 147 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. |
| 148 | Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 75mm x 50mm x 3.15mm |
| 149 | \\"Providing and fixing Square bars or other flat welded to window, ventilatiors etc. ( frame work for exhaust fan )\\" |
| 150 | \\"S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding.\\" |
| 151 | Kota stone slab minimum 30mm thick (semi-polished)( for kitchen) |
| 152 | \\"1.0 mm thick stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make as per Engineer-in-charge withlarge waste coupling. 22 x 18 x 7 (overal size) 20x16x7\\" |
| 153 | Chain link fabric fancing mesh of size 50x50mm made of G.I. wire of dia. 3.15mm. |
| 154 | Demolishing of Brick masonry includings tacking of serviceable material and disposal of unserviceable material within 50 m lead.Brick masonry in cement mortar |
| 155 | M.S. Pipe of 8mm/10mm thickness |
| 156 | Providing and fixing of Syphon Breaker valve on existing delivery pipe and civil structure, removing of old valves, testing, painting. for Delievery pipe size above 1000 mm |
| 157 | Single brick lining 104 mm thick with brick size 23 x 11 x 7 cm in bed laid in 6 mm thick cement mortar 1:3 (1 cement : 3 bajari ) over base plaster of 12 mm thick in cement mortar1:6 (1 cement : 6 bajari ) & 16 mm thick sandwich plaster in cement mortar 1:3 (1 cement : 3 bajari ). including mechanical mixing of mortar, dressing of bed,scaffolding, laying & jointing of LDPE/HDPE film & curing for 28 days complete as per specification excluding cost of LDPE/HDPE film including cost of jointing material. |
| 158 | Mason/ Mistry Grade –I , Carpenter Grade –I , Plumber Grade-I, Hole Driller, Electrician,Mechanic, Welder |
| 159 | hire charges for welding set with generator and POL |
| 160 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone minimum 30mm thick.. As |
| 161 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Choclate Colour) upto 1500 Cm2 Slabs |
| 162 | Making of hole ( width up to 150 mm ) in RCC slab / wall / beams by power driven drilling machine complite as per direction of EI: above 150 mm thick . . |
| 163 | Providing & Fixing premium quality WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete Flat Back (small) size 440x265x315 mm |
| 164 | Providing & Fixing premium quality W.V.C. Urinal Partition plate of size 630x315 mm |
| 165 | P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make. For 2 Urinals |
| 166 | M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006Category B‟ Denated only two side like I,Z,T shape etc. As per IRC SP 63:2004 |
| 167 | Electrification Work |
| 168 | Providing & Fixing of IK08, IP 66 protected 100 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted |
| 169 | Providing & Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted |
| 170 | Supply of 240/415 V AC MCB with positive isolation of 10kA breaking capacity, 4 KV impulse withstand voltage, ISI marked IS 8828(1996) /conforming to IEC 60898-1 2002, IEC 60947-2. Single pole 40 A rating |
| 171 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb inexisting holder or fixture as required with system lumen efficacy ≥100 lm/Watt output15 WATT |
| 172 | Providing and fixing of energy efficient direct fit ( retrofit) polycarbonate/ Glass housing SMD Mid power LED tube rod ( with integral driver and alumn. Heat sink) on existing fixture 1200mm, Min. Lumens output 2000 lm LED Tube rod with Glass Housing |
| 173 | P & F of ISI marked (IS:1258) 6amp batten/angle lamp holder as per PWD specifications for electrical works made out from industrial grade polycarbonate or fire resistant making connection testing etc. |
| 174 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc 5 step fan regulator 2 Module 360 dgree rotating |
| 175 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing(i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 |
| 176 | Providing & Fixing of of ventilating fans Capacitor start, copper wounded, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required.200mm sweep : 200mm sweep |
| 177 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/-10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , referAnnexure \\"A\\" attached with this BSR .2.0 TR ISEER not less then 4.6 |
| 178 | Supply of P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper Power cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round /flat strip armouring, Inner / outer sheath confirming to IS:5831 2C X 4 Sq. mm |
| 179 | Supply of P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper Power cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round /flat strip armouring, Inner / outer sheath confirming to IS:5831 - 2C X 10 Sq. mm |
| 180 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required.2X2.5 sq mm |
| 181 | Supply of Flame Retardant PVC insulated & unsheathed flexible copper conductor complete Roll (90 meters) with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 51C X 1.5 Sq. mm |
| 182 | Supply of Flame Retardant PVC insulated & unsheathed flexible copper conductor complete Roll (90 meters) with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5 1C X 2.5 Sq. mm |
| 183 | Supply of Flame Retardant PVC insulated & unsheathed flexible copper conductor complete Roll (90 meters) with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5 1C X 4 Sq. mm |
| 184 | Supply of Flame Retardant PVC insulated & unsheathed flexible copper conductor complete Roll (90 meters) with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5 1C X 6 Sq. mm |
| 185 | S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. 38 mm x 25 mm |
| 186 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc.450 mm sweep(900/1400 RPM) |
| 187 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. |
| 188 | Providing & Fixing of modular type switch/ bell push duly ISI marked and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip ,minimum width of switch toggle( PUSH PART ) should not less then 20mm10 A one way switch |
| 189 | Providing & Fixing of modular type switch/ bell push duly ISI marked and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip ,minimum width of switch toggle( PUSH PART ) should not less then 20mm 16 A one way switch With Led Indicator |
| 190 | Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required. 3 Module |
| 191 | Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thickwith earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required. 5 Module |
| 192 | Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required. 12 Module |
| 193 | Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.3 Module |
| 194 | Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. 5 Module |
| 195 | Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. 12 Module |
| 196 | Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip ,including all ,making connections, testing etc. as required. 6/16 A shuttered socket\\" |
| 197 | SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, . Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase,Head, minimum Discharge respectively complete in all respect.1.0 HP, 1-Ø, (10-120)Mtr, (30-12) LPM\\" |
| 198 | GST @ 18% ( 9% CGST+ 9% SGST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender