Tender For Jal Jeevan Mission (Jjm)-Marutharod Gramapanchayath - Hdd Crossing -Linking With Jts Tank-Pipeline Work
Tender Value
40.77 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Jal Jeevan Mission (Jjm)-Marutharod Gramapanchayath - Hdd Crossing -Linking With Jts Tank-Pipeline Work
BOQ
| Sl. No. | Item Description |
| 1 | HDD- Cost of materials |
| 2 | OD274135/2024-2025:Supplying of M.S. Pipe 500 mm dia casing pipe |
| 3 | 100.37.13.3:Cutting 500mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 4 | 100.37.13.4:Welding 500mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 5 | 100.37.13.5:Grinding cut and weld edges of 500mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 6 | OD17293/2025-2026:Supplying M.S. Pipe 350 mm dia for distribution line |
| 7 | 100.37.10.2:Fabricating M.S. flanges of diameter 350mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 8 | 100.37.10.3:Cutting 350mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 9 | 100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 10 | 100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 11 | HDD METHOD EXCAVATION IN NH - Working charges |
| 12 | OD274155/2024-2025:Towards the charges for conveying Horizontal Drilling devices after loading into container truck from Kozhikkod/Ernakulam (the nearest place where the devices are available at present) to work site at Marutharoad, unloading the device using moving crane without making any damage to machine as well as to any structures or establishment belonging to PWD, conveying and placing the device at exact location for drilling as directed by NHAI.the machines after completing the work carefully restoring the site to original position, including the conveyance charges , loading and unloading charges , labor engaged for clearing the site , earth work excavation in hard soil, drilling charges , pushing and pulling charges cost of fuel and sundries required for the operation excluding cost of pipes etc complete - HDD work through all kinds of soil and in ordinary rock (Excluding MS Casing pipes) |
| 13 | OD274154/2024-2025:Towards the charges for conveying Horizontal Drilling devices after loading into container truck from Kozhikkod/Ernakulam (the nearest place where the devices are available at present) to work site at Marutharoad, unloading the device using moving crane without making any damage to machine as well as to any structures or establishment belonging to PWD, conveying and placing the device at exact location for drilling as directed by NHAI.the machines after completing the work carefully restoring the site to original position, including the conveyance charges , loading and unloading charges , labor engaged for clearing the site , earth work excavation in hard soil, drilling charges , pushing and pulling charges cost of fuel and sundries required for the operation excluding cost of pipes etc complete - HDD work through Hardrock ( excluding MS casing pipes) |
| 14 | 16.81Y:Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting,arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required toexecute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).Sub analysis item for fabrication charges of item No. 16.81 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender