Tender For Renovation And Civil Maintenance Of The Suit 2 Of Iq At Second Floor Of City Telephone Exchange, Vadodara.
Tender Value
2.84 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
5692
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Civil Maintenance Of The Suit 2 Of Iq At Second Floor Of City Telephone Exchange, Vadodara.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 3 | Removing door fittings from old shutter carefully without any damages and refixing to new door shutter with necessary matching CP brass/SS screws as per direction of Engineer in charge. |
| 4 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 250x16 mm |
| 5 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 200x10 mm |
| 6 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 125 mm |
| 7 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 9 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: (a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. (a) New work(Two coats with undercoat of primer) |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. (a) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 16 | Providing & fixing White vitreous china water closet European along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (a) European pan |
| 17 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm |
| 18 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : (a) 75 to 80 mm dia pipe. |
| 19 | 100 mm dia pipe |
| 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Flexible pipe (i) 32 mm dia |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Expopsed on wall (a) 20 mm nominal outer dia. Pipes. |
| 25 | 32 mm nominal outer dia .Pipes. |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions : (a) 45 cm length (i) 15 mm nominal bore |
| 27 | Providing and fixing CP Brass bib cock of approved quality and colour. (a) 15 mm dia nominal bore |
| 28 | Providing and fixing CP Brass stop cock of approved quality and colour. (a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 29 | Providing and fixing PTMT grating of approved quality and colour. (a) Rectangular type with openable circular lid. (i) 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 30 | Water proofing treatment of RCC sunshade with Zycosil / equivalent water proffing solution [1 Litre Zycosil / equivalent & 20 litres of water stirred first & 2 litres of Zycoprime / equivalent added and stirred (total 23 litres)] till it meats the saturation level and testing as per RIELM or by water drops test in which water drop do not absorb but drop remains or rolls. |
| 31 | Providing SWR PVC Fix O Ring type conforming to IS 13592 pipes for drainage including cutting, bending abd fixing at all levels including SWR pipe fittings required in laying at site and if required applying necessary approved PVC solutions all complete as per direction of Engineer in charge. (a) 100 mm dia pipe incl fittings |
| 32 | Repairing Toilet fittings (CP Brass bibcock, stop cock, piller cock, shower, Flush tank Etc…) and making them operational. |
| 33 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : (a) PVC 100 mm inlet and 100 mm outlet |
| 34 | Providing and fixing brass handle valve in CPVC pipe including CPVC solvent cement and testing all complete (a) 25 mm dia. |
| 35 | Removing the filler material from sunk and reflling including compacting the same after necessary new pipe line laying and connection work completed, all as per direction of Engineer in charge. |
| 36 | Providing and fixing Stone door frame 100x65 mm including fixing with araldite solution over the finished plastered opening before fixing any cladding/dado. |
| 37 | Supplying and fixing 18 mm thick Water resistant plywood of approved make and quality for repairing work. Necessary material for fixing and T&P are included in this item. |
| 38 | Supplying and fixing 1 mm thick wooden veneer sheet over the plywood of approved make and quality for repairing work. Necessary material for fixing and T&P are included in this item. |
| 39 | Polishing visible veneered wooden surfaces of double bed and back cover and chairs with ready mixed wax polish of Asian paints or equivalent. |
| 40 | Supplying and fixing 50 mm thick cushion with covers of size 400 x 450 mm for seats of the wooden chairs of approved quality of foam and tapestry as per direction of engineer in charge. |
| 41 | Repairing existing sofa by removing the existing tapestry, settled and crushed foam from back and seat and providing the new foam of density-40 (100 mm thickness). Tapestry of Decora or equivalent make at seat and back all complete as per direction of Engineer in charge. (a) Sofa with seat and back |
| 42 | Sofa with seat only |
| 43 | Supplying new ready made mattress with 40 density foam with quilted fabric permenant cover of SLEEPWELL or equivalent approved make (100 mm thick ) for single bed (size 36\\"x 78\\") |
| 44 | Supplying new ready made pillow (size 27\\" x 17\\") for bed made of micro fibre with quilted fabric permenant cover of SLEEPWELL HUGGS Premium Plush fibre or equivalent approved make |
| 45 | Supplying new cotton full size single bed sheet with matching pillow cover of approved brand as per direction of Engineer in charge. |
| 46 | Credit for rusted / deformed unserviceable material obtained from dismantling. (a) G.I./C.I. scrap |
| 47 | CP Brass/Brass Bib/Stop cock Note: Quantities shown negative as this is a credit to work item. Positive rate quoted by agency shall automatically calculate amount credited to work in lieu of dismantled material to be taken away by contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender