Tender For Hiring Of Services For Augmentation Of Lightning Protection Systems Installed Across Gail Ramgarh As Per Iec 62305
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Hiring Of Services For Augmentation Of Lightning Protection Systems Installed Across Gail Ramgarh As Per Iec 62305
BOQ
| Sl. No. | Item Description |
| 1 | Part A : LPS Augmentation at Dandewala |
| 2 | Supply & Inst. of 500 mm air termination rod. Job includes Supply & Inst. of 500 mm air termination rod. Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 3 | Supply & Inst. 1000 mm Air-termination Job includes Supply & Inst. of Air-termination rod having length- 1000 mm, of Material- AlMgSi, of Diameter Ø 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 4 | Supply & Inst. 1500 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 1500 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 5 | Supply & Inst. 3000 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 3000 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 6 | Supply & Inst. of Parallel Connectors Job includes Supply & Inst. of Parallel Connectors for (700mm air terminal) connecting two conductors in parallel manner. Material- StSt, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 7 | Supply & Inst. of Plastic support plate Job includes Supply & Inst. Plastic support plate for concrete base. For protecting the roofing sheets under the concrete base (17 kg.). The Diameter Ø outside 370 mm, Diameter Ø inside 360 mm and Material EVA. |
| 8 | Supply & Inst. Of Concrete Block Job includes Supply & Inst. Concrete Block -Round-17Kg with Wedge Clip |
| 9 | Supply & Inst. Air-termination rod clamps 10mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 10 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 10 | Supply & Inst. Air-termination rod clamps 16mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 16 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 11 | Supply & Inst. of Roof conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 12 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 13 | Supply & Inst. Universal connector Job includes Supply & Inst Universal connector of Material- StSt, with clamping range- 8-10mm, with truss head screw M10x35 mm & Complied as per Standard EN 62561-1., Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 14 | Supply & Inst. Pipe Clamp Job includes Supply & Inst. Pipe Clamp for Air-termination Rods. Material of head / strip-StSt, Clamping range of square hollow profile- 40 x 60 to 70 x 70 mm, Clamping range of pipe- 50-300 mm, Connection- Rd 16 mm, Dimension of strip- 1100 x 25 x 0.3 mm & Complied as per Standard EN 62561-1.The clamp should be complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming lightning impulse tests as per IEC 62561 |
| 15 | Supply & Inst. Pipe clamp D Job includes Supply & Inst. Pipe clamp D 16-168 mm (3/8-6\\") StSt with terminal clamp 1xRd 10 mm or 2xRd 6-8 mm for connecting metal railing with 8mm Al solid round conductor, EN 50164-1The clamp should be complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming lightning impulse tests as per IEC 62561 |
| 16 | Supply & Inst. Connection Clamps Job includes Supply & Inst. Connection Clamps for Steel/metal column. Clamping range of the clamp- 3-18 mm, Material of the clamp- StSt, Clamping range of conductor Rd 6-10 mm, & Complied as per Standard EN 62561-1.Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 17 | Supply & Inst. of down conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 18 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 19 | Supply & Inst. Lightning strike counterJob includes supply & inst. Lightning strike counter used to counte the digital impulse currents. Device for installation preferably on down conductors of the lightning protection system or between equipotential bonding bar and earth-termination system. Operating current (8/20 μs)- 1 kA, Max. discharge current (10/350 μs)- 100 kA, Clamping range- Rd/Fl 8-10/30 mm, Number of occurrences up to 999, Operating temperature range (TU) -20 °C ... +60 °C.Lithium battery 3V, CR123A, Make: Panasonic |
| 20 | Supply & Inst. GI flat stripJob includes supply & inst. GI flat (25x6mm) Strip having width- 25mm, thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns. & Complied as per IEC 62561-2 for termination of down conductor from test link to the earth pit termination clamp. |
| 21 | Supply & Inst. UNI Disconnecting Clamps Job includes supply & inst. UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material- StSt, Material thickness- 2.5 mm, with clamping range- Rd / Fl 8-10 / 30 mm, & Complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IS/IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 22 | Supply & Inst. GI strip holderJob includes Supply & Inst. GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm., |
| 23 | Supply & Inst. Copper bonded rodJob includes supply & inst. Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.Minumum short circuit current withstand capability - 18 KAmp RMS for 1 secondApprovals- CPRI and UL 467UL and CPRI approval certificates along with Test certificates complying IS/IEC 62561 are to be submitted in technical bid |
| 24 | Supply & Inst. 20 kg backfilled compoundJob includes supply & inst. 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , The compound shall be tested for thermal stability for temp range -60 to +60 degree C, Shall have Sulphur content less than 2% and shall have resistivity of 0.12 ohm.M or less, The compound should be non-corrosive in nature, pH should be in the range of 6.5 - 7.5Test Certificates from NABL/ILAC accredited labs are to be submitted for the parameters like RoHS compliant, pH, thermal stability, electrical resistivity and sulphur content |
| 25 | Supply & Inst. StSt 316 grade clampJob includes StSt 316 grade clamp to terminate the load on earth electrode. Dimension- 160x35x3 mm |
| 26 | Supply & Inst. Poly plastic pit coverPoly plastic pit cover of material- Polymer Body & Cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS).Test Certificate for load testing need to be submitted along with technical bid |
| 27 | Supply & Inst. Type-1 SPD(L-N)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel (3 phase, 415 V) for L – N with specification mentioned in SOW |
| 28 | Supply & Inst. Type-1 SPD(N -PE)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel for N -PE with specification mentioned in SOW |
| 29 | Supply & Inst. Earthing clipJob includes supply & inst Earthing clip with three-module enclosure, single-phase, three-poleEarthing clip for connecting the earth terminal of e.g. threeSPDs with 3-module enclosure and terminal to earthSingle-phase, three-poleTerminal up to 25 mm2Dimensions: (31 x 153 x 28) mm |
| 30 | Supply & Inst. Type-2 SPDJob includes supply & inst Modular and pluggable single-pole surge arresterWidth: 1 module, fault indication With remote signalling contact Type 2 SPD according to EN 61643-11Max. continuous operating voltage: 48 V a.c./60 V d.c.Voltage protection level: <= 0.33 kVNominal discharge current: 7.5 kAShort circuit strength: 50 kArmsEnergy-coordinated according to IEC 62305-4with arresters of the Red/Line series |
| 31 | Part B : LPS Augmentation at GamnewalaSoR for LPS Augmentation Job at Ramgarh O&M Base |
| 32 | Supply & Inst. of 500 mm air termination rod. Job includes Supply & Inst. of 500 mm air termination rod. Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 33 | Supply & Inst. 1000 mm Air-termination Job includes Supply & Inst. of Air-termination rod having length- 1000 mm, of Material- AlMgSi, of Diameter Ø 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 34 | Supply & Inst. 2500 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 2500 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 35 | Supply & Inst. 3000 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 3000 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 36 | Supply & Inst. of Parallel Connectors Job includes Supply & Inst. of Parallel Connectors for (700mm air terminal) connecting two conductors in parallel manner. Material- StSt, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 37 | Supply & Inst. of Plastic support plate Job includes Supply & Inst. Plastic support plate for concrete base. For protecting the roofing sheets under the concrete base (17 kg.). The Diameter Ø outside 370 mm, Diameter Ø inside 360 mm and Material EVA. |
| 38 | Supply & Inst. Of Concrete Block Job includes Supply & Inst. Concrete Block -Round-17Kg with Wedge Clip |
| 39 | Supply & Inst. Air-termination rod clamps 10mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 10 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 40 | Supply & Inst. Air-termination rod clamps 16mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 16 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 41 | Supply & Inst. of Roof conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 42 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 43 | Supply & Inst. Universal connector Job includes Supply & Inst Universal connector of Material- StSt, with clamping range- 8-10mm, with truss head screw M10x35 mm & Complied as per Standard EN 62561-1., Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 44 | Supply & Inst. Pipe clamp D Job includes Supply & Inst. Pipe clamp D 16-168 mm (3/8-6\\") StSt with terminal clamp 1xRd 10 mm or 2xRd 6-8 mm for connecting metal railing with 8mm Al solid round conductor, EN 50164-1The clamp should be complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming lightning impulse tests as per IEC 62561 |
| 45 | Supply & Inst. Connection Clamps Job includes Supply & Inst. Connection Clamps for Steel/metal column. Clamping range of the clamp- 3-18 mm, Material of the clamp- StSt, Clamping range of conductor Rd 6-10 mm, & Complied as per Standard EN 62561-1.Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 46 | Supply & Inst. of down conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 47 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 48 | Supply & Inst. Lightning strike counterJob includes supply & inst. Lightning strike counter used to counte the digital impulse currents. Device for installation preferably on down conductors of the lightning protection system or between equipotential bonding bar and earth-termination system. Operating current (8/20 μs)- 1 kA, Max. discharge current (10/350 μs)- 100 kA, Clamping range- Rd/Fl 8-10/30 mm, Number of occurrences up to 999, Operating temperature range (TU) -20 °C ... +60 °C.Lithium battery 3V, CR123A, Make: Panasonic |
| 49 | Supply & Inst. GI flat stripJob includes supply & inst. GI flat (25x6mm) Strip having width- 25mm, thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns. & Complied as per IEC 62561-2 for termination of down conductor from test link to the earth pit termination clamp. |
| 50 | Supply & Inst. UNI Disconnecting Clamps Job includes supply & inst. UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material- StSt, Material thickness- 2.5 mm, with clamping range- Rd / Fl 8-10 / 30 mm, & Complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IS/IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 51 | Supply & Inst. GI strip holderJob includes Supply & Inst. GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm., |
| 52 | Supply & Inst. Copper bonded rodJob includes supply & inst. Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.Minumum short circuit current withstand capability - 18 KAmp RMS for 1 secondApprovals- CPRI and UL 467UL and CPRI approval certificates along with Test certificates complying IS/IEC 62561 are to be submitted in technical bid |
| 53 | Supply & Inst. 20 kg backfilled compoundJob includes supply & inst. 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , The compound shall be tested for thermal stability for temp range -60 to +60 degree C, Shall have Sulphur content less than 2% and shall have resistivity of 0.12 ohm.M or less, The compound should be non-corrosive in nature, pH should be in the range of 6.5 - 7.5Test Certificates from NABL/ILAC accredited labs are to be submitted for the parameters like RoHS compliant, pH, thermal stability, electrical resistivity and sulphur content |
| 54 | Supply & Inst. StSt 316 grade clampJob includes StSt 316 grade clamp to terminate the load on earth electrode. Dimension- 160x35x3 mm |
| 55 | Supply & Inst. Poly plastic pit coverPoly plastic pit cover of material- Polymer Body & Cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS).Test Certificate for load testing need to be submitted along with technical bid |
| 56 | Supply & Inst. Type-1 SPD(L-N)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel (3 phase, 415 V) for L – N with specification mentioned in SOW |
| 57 | Supply & Inst. Type-1 SPD(N -PE)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel for N -PE with specification mentioned in SOW |
| 58 | Supply & Inst. Earthing clipJob includes supply & inst Earthing clip with three-module enclosure, single-phase, three-poleEarthing clip for connecting the earth terminal of e.g. threeSPDs with 3-module enclosure and terminal to earthSingle-phase, three-poleTerminal up to 25 mm2Dimensions: (31 x 153 x 28) mm |
| 59 | Supply & Inst. Type-2 SPDJob includes supply & inst Modular and pluggable single-pole surge arresterWidth: 1 module, fault indication With remote signalling contact Type 2 SPD according to EN 61643-11Max. continuous operating voltage: 48 V a.c./60 V d.c.Voltage protection level: <= 0.33 kVNominal discharge current: 7.5 kAShort circuit strength: 50 kArmsEnergy-coordinated according to IEC 62305-4with arresters of the Red/Line series |
| 60 | Part C : LPS Augmentation at LangtalaSoR for LPS Augmentation Job at Ramgarh O&M Base |
| 61 | Supply & Inst. of 500 mm air termination rod. Job includes Supply & Inst. of 500 mm air termination rod. Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 62 | Supply & Inst. 1000 mm Air-termination Job includes Supply & Inst. of Air-termination rod having length- 1000 mm, of Material- AlMgSi, of Diameter Ø 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 63 | Supply & Inst. 1500 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 1500 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 64 | Supply & Inst. of Parallel Connectors Job includes Supply & Inst. of Parallel Connectors for (700mm air terminal) connecting two conductors in parallel manner. Material- StSt, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 65 | Supply & Inst. of Plastic support plate Job includes Supply & Inst. Plastic support plate for concrete base. For protecting the roofing sheets under the concrete base (17 kg.). The Diameter Ø outside 370 mm, Diameter Ø inside 360 mm and Material EVA. |
| 66 | Supply & Inst. Of Concrete Block Job includes Supply & Inst. Concrete Block -Round-17Kg with Wedge Clip |
| 67 | Supply & Inst. Air-termination rod clamps 10mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 10 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 68 | Supply & Inst. Air-termination rod clamps 16mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 16 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 69 | Supply & Inst. of Roof conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 70 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 71 | Supply & Inst. Universal connector Job includes Supply & Inst Universal connector of Material- StSt, with clamping range- 8-10mm, with truss head screw M10x35 mm & Complied as per Standard EN 62561-1., Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 72 | Supply & Inst. Pipe clamp D Job includes Supply & Inst. Pipe clamp D 16-168 mm (3/8-6\\") StSt with terminal clamp 1xRd 10 mm or 2xRd 6-8 mm for connecting metal railing with 8mm Al solid round conductor, EN 50164-1The clamp should be complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming lightning impulse tests as per IEC 62561 |
| 73 | Supply & Inst. Connection Clamps Job includes Supply & Inst. Connection Clamps for Steel/metal column. Clamping range of the clamp- 3-18 mm, Material of the clamp- StSt, Clamping range of conductor Rd 6-10 mm, & Complied as per Standard EN 62561-1.Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 74 | Supply & Inst. of down conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 75 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 76 | Supply & Inst. Lightning strike counterJob includes supply & inst. Lightning strike counter used to counte the digital impulse currents. Device for installation preferably on down conductors of the lightning protection system or between equipotential bonding bar and earth-termination system. Operating current (8/20 μs)- 1 kA, Max. discharge current (10/350 μs)- 100 kA, Clamping range- Rd/Fl 8-10/30 mm, Number of occurrences up to 999, Operating temperature range (TU) -20 °C ... +60 °C.Lithium battery 3V, CR123A, Make: Panasonic |
| 77 | Supply & Inst. GI flat stripJob includes supply & inst. GI flat (25x6mm) Strip having width- 25mm, thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns. & Complied as per IEC 62561-2 for termination of down conductor from test link to the earth pit termination clamp. |
| 78 | Supply & Inst. UNI Disconnecting Clamps Job includes supply & inst. UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material- StSt, Material thickness- 2.5 mm, with clamping range- Rd / Fl 8-10 / 30 mm, & Complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IS/IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 79 | Supply & Inst. GI strip holderJob includes Supply & Inst. GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm., |
| 80 | Supply & Inst. Copper bonded rodJob includes supply & inst. Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.Minumum short circuit current withstand capability - 18 KAmp RMS for 1 secondApprovals- CPRI and UL 467UL and CPRI approval certificates along with Test certificates complying IS/IEC 62561 are to be submitted in technical bid |
| 81 | Supply & Inst. 20 kg backfilled compoundJob includes supply & inst. 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , The compound shall be tested for thermal stability for temp range -60 to +60 degree C, Shall have Sulphur content less than 2% and shall have resistivity of 0.12 ohm.M or less, The compound should be non-corrosive in nature, pH should be in the range of 6.5 - 7.5Test Certificates from NABL/ILAC accredited labs are to be submitted for the parameters like RoHS compliant, pH, thermal stability, electrical resistivity and sulphur content |
| 82 | Supply & Inst. StSt 316 grade clampJob includes StSt 316 grade clamp to terminate the load on earth electrode. Dimension- 160x35x3 mm |
| 83 | Supply & Inst. Poly plastic pit coverPoly plastic pit cover of material- Polymer Body & Cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS).Test Certificate for load testing need to be submitted along with technical bid |
| 84 | Supply & Inst. Type-1 SPD(L-N)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel (3 phase, 415 V) for L – N with specification mentioned in SOW |
| 85 | Supply & Inst. Type-1 SPD(N -PE)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel for N -PE with specification mentioned in SOW |
| 86 | Supply & Inst. Earthing clipJob includes supply & inst Earthing clip with three-module enclosure, single-phase, three-poleEarthing clip for connecting the earth terminal of e.g. threeSPDs with 3-module enclosure and terminal to earthSingle-phase, three-poleTerminal up to 25 mm2Dimensions: (31 x 153 x 28) mm |
| 87 | Supply & Inst. Type-2 SPDJob includes supply & inst Modular and pluggable single-pole surge arresterWidth: 1 module, fault indication With remote signalling contact Type 2 SPD according to EN 61643-11Max. continuous operating voltage: 48 V a.c./60 V d.c.Voltage protection level: <= 0.33 kVNominal discharge current: 7.5 kAShort circuit strength: 50 kArmsEnergy-coordinated according to IEC 62305-4with arresters of the Red/Line series |
| 88 | Part D : LPS Augmentation at RamgarhSoR for LPS Augmentation Job at Ramgarh O&M Base |
| 89 | Supply & Inst. of 500 mm air termination rod. Job includes Supply & Inst. of 500 mm air termination rod. Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 90 | Supply & Inst. 1000 mm Air-termination Job includes Supply & Inst. of Air-termination rod having length- 1000 mm, of Material- AlMgSi, of Diameter Ø 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 91 | Supply & Inst. 3000 mm Air-termination rod Job includes Supply & Inst. of Air-termination rod having length- 3000 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered on both ends, & Complied as per Standard EN 62561-2.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 92 | Supply & Inst. of Parallel Connectors Job includes Supply & Inst. of Parallel Connectors for (700mm air terminal) connecting two conductors in parallel manner. Material- StSt, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 93 | Supply & Inst. of Plastic support plate Job includes Supply & Inst. Plastic support plate for concrete base. For protecting the roofing sheets under the concrete base (17 kg.). The Diameter Ø outside 370 mm, Diameter Ø inside 360 mm and Material EVA. |
| 94 | Supply & Inst. Of Concrete Block Job includes Supply & Inst. Concrete Block -Round-17Kg with Wedge Clip |
| 95 | Supply & Inst. Air-termination rod clamps 10mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 10 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 96 | Supply & Inst. Air-termination rod clamps 16mm Job includes Supply & Inst. Air-termination rod clamps for connecting air-termination rods with one or two conductors. Material of clamp Al, with clamping range of air-termination rod 16 mm and Clamping range of conductor Rd 2x 8-10 mm, & Complied as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 97 | Supply & Inst. of Roof conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 98 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 99 | Supply & Inst. Universal connector Job includes Supply & Inst Universal connector of Material- StSt, with clamping range- 8-10mm, with truss head screw M10x35 mm & Complied as per Standard EN 62561-1., Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 100 | Supply & Inst. Pipe clamp D Job includes Supply & Inst. Pipe clamp D 16-168 mm (3/8-6\\") StSt with terminal clamp 1xRd 10 mm or 2xRd 6-8 mm for connecting metal railing with 8mm Al solid round conductor, EN 50164-1The clamp should be complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard EN 62561-1.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming lightning impulse tests as per IEC 62561 |
| 101 | Supply & Inst. Connection Clamps Job includes Supply & Inst. Connection Clamps for Steel/metal column. Clamping range of the clamp- 3-18 mm, Material of the clamp- StSt, Clamping range of conductor Rd 6-10 mm, & Complied as per Standard EN 62561-1.Items must be tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 102 | Supply & Inst. of down conductorJob includes Supply & Inst. Roof conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi.Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 103 | Supply & Inst Conductor holder Job includes Supply & Inst Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4.With accessories Screw and Gitty, Material SS (M5 x 50mm) Test certificate from NABL/ILAC accrdited lab need to be submitted confirming material specification and other tests as per IEC 62561 |
| 104 | Supply & Inst. Lightning strike counterJob includes supply & inst. Lightning strike counter used to counte the digital impulse currents. Device for installation preferably on down conductors of the lightning protection system or between equipotential bonding bar and earth-termination system. Operating current (8/20 μs)- 1 kA, Max. discharge current (10/350 μs)- 100 kA, Clamping range- Rd/Fl 8-10/30 mm, Number of occurrences up to 999, Operating temperature range (TU) -20 °C ... +60 °C.Lithium battery 3V, CR123A, Make: Panasonic |
| 105 | Supply & Inst. GI flat stripJob includes supply & inst. GI flat (25x6mm) Strip having width- 25mm, thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns. & Complied as per IEC 62561-2 for termination of down conductor from test link to the earth pit termination clamp. |
| 106 | Supply & Inst. UNI Disconnecting Clamps Job includes supply & inst. UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material- StSt, Material thickness- 2.5 mm, with clamping range- Rd / Fl 8-10 / 30 mm, & Complied and tested for minimum 50 KA lightning current (@ 10/350 μSec) as per Standard IS/IEC 62561-1. Test Report from NABL/ILAC accrdited lab need to be submitted along with technical bid confirming lightning impulse tests as per IS/IEC 62561 |
| 107 | Supply & Inst. GI strip holderJob includes Supply & Inst. GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm., |
| 108 | Supply & Inst. Copper bonded rodJob includes supply & inst. Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.Minumum short circuit current withstand capability - 18 KAmp RMS for 1 secondApprovals- CPRI and UL 467UL and CPRI approval certificates along with Test certificates complying IS/IEC 62561 are to be submitted in technical bid |
| 109 | Supply & Inst. 20 kg backfilled compoundJob includes supply & inst. 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , The compound shall be tested for thermal stability for temp range -60 to +60 degree C, Shall have Sulphur content less than 2% and shall have resistivity of 0.12 ohm.M or less, The compound should be non-corrosive in nature, pH should be in the range of 6.5 - 7.5Test Certificates from NABL/ILAC accredited labs are to be submitted for the parameters like RoHS compliant, pH, thermal stability, electrical resistivity and sulphur content |
| 110 | Supply & Inst. StSt 316 grade clampJob includes StSt 316 grade clamp to terminate the load on earth electrode. Dimension- 160x35x3 mm |
| 111 | Supply & Inst. Poly plastic pit coverPoly plastic pit cover of material- Polymer Body & Cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS).Test Certificate for load testing need to be submitted along with technical bid |
| 112 | Supply & Inst. Type-1 SPD(L-N)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel (3 phase, 415 V) for L – N with specification mentioned in SOW |
| 113 | Supply & Inst. Type-1 SPD(N -PE)Job includes supply & inst Spark Gap based Metal Encapsulated Single Pole Lightning current & Surge Protection Device at mains LT Panel for N -PE with specification mentioned in SOW |
| 114 | Supply & Inst. Earthing clipJob includes supply & inst Earthing clip with three-module enclosure, single-phase, three-poleEarthing clip for connecting the earth terminal of e.g. threeSPDs with 3-module enclosure and terminal to earthSingle-phase, three-poleTerminal up to 25 mm2Dimensions: (31 x 153 x 28) mm |
| 115 | Supply & Inst. Type-2 SPDJob includes supply & inst Modular and pluggable single-pole surge arresterWidth: 1 module, fault indication With remote signalling contact Type 2 SPD according to EN 61643-11Max. continuous operating voltage: 48 V a.c./60 V d.c.Voltage protection level: <= 0.33 kVNominal discharge current: 7.5 kAShort circuit strength: 50 kArmsEnergy-coordinated according to IEC 62305-4with arresters of the Red/Line series Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender