Tender For Improvement Of Kondi-Dagadi Pod Road (Vr 121) Total Length 1.00 Km In Part 0/000 To 0/600 Tq. Kelapur Distt . Yavatmal
Tender Value
20 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
13 days left
EMD
20000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Yavatmal → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Kondi-Dagadi Pod Road (Vr 121) Total Length 1.00 Km In Part 0/000 To 0/600 Tq. Kelapur Distt . Yavatmal
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish upto a distance of 50 metres outside the periphery of the area . PWD SSR It..No. 2.07 |
| 2 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). PWD SSR It..No. 50.57 |
| 3 | Providing and constructing 50mm. thick Modified Penetration Macadam(MPM) roadsurface including all mataerials, preparing the existing road surface,spreading 40mm. stone metal layers 30% crusher broken metal +70% Handbroken (bybreaking rubble obtained by blasting) heating and spray ing the bitumen of specified grade @1.75kg/sqm, spreading 12mm. size chips compacting with static roller having weight 8 to 10MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR It..No. 3.37a |
| 4 | Open Graded Premix Surfacing Providing & Laying OGC 20 mm thickness composed of 13.2 mm to 5.6mm aggregates premixed with bituminous binder transported to site with VTS laid over a previously prepared surface finished to the required grade level alignment and rolling to achieve the desired compaction but excluding prime / tack and Seal coat For Bitumen of specified grade-USING drum mix type hot mix plant with SCADA Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR It..No. 4.12 |
| 5 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2 kg / Sqm preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT etc complete (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR It..No. 4.13 |
| 6 | Supplying hard murum at the roadside,including conveying and stacking complete. ( PWD CSR It. No. 2.29a /P. No.25) PWD SSR It..No. 2.29a |
| 7 | Supplying soft murum at the road side,including conveying and stacking complete. PWD SSR It..No. 2.29b |
| 8 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. PWD SSR It..No. 2.30 |
| 9 | Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . PWD SSR It..No. 50.58 |
| 10 | Compacting the gravel / size metal (100mm loose) layers for all widths with static roller including necessary labour,materials and artificial watering etc.complete. PWD SSR It..No. 50.61 |
| 11 | Compacting the hard murum /soft Murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. PWD SSR It..No. 2.31 |
| 12 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. PWD SSR It..No. 2.18 |
| 13 | Providing and fixing RCC 200 meter stone as per I.R.C. standard including fixing in standard size CC 1:4:8 block including curing, painting lettering etc. complete. PWD SSR It..No. 6.02a |
| 14 | Providing and fixing 1:2:4 Ordinary KM stone as per I.R.C. standard including fixing in standard size CC 1:4:8 block including curing, painting lettering etc. complete. PWD SSR It..No. 6.02b |
| 15 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). PWD SSR It..No. 6.12a |
| 16 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. PWD SSR It..No. 6.09 |
| 17 | Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade, PWD SSR It..No. 6.38 |
| 18 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge SSR It. No. 6.36 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender