Tender For Kune N.M.Rural Water Supply Scheme Taluka-Maval Dist Pune Under Jjm
Tender Value
1.78 Crore
Estimated cost
Bid Submission
17 Jul 2026
6 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Kune N.M.Rural Water Supply Scheme Taluka-Maval Dist Pune Under Jjm
BOQ
| Sl. No. | Item Description |
| 1 | SUB-ESTIMATE NO : 01 Pure water Pumping Machinery SProviding, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283,with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suita ble for working on 415 V ± 10%, 3 Ph,50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire h ydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. From WTP Sump to ESR Cap- 25 HP, Q-21.88 LPS, Head- 45m 200 mm dia |
| 2 | SLUICE VALVE Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 150 MM DIA PN-1.0 |
| 3 | REFLUX VALVE Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) 150 MM DIA PN 1.0 |
| 4 | KINETIC AIR VALVE Designing Providing erecting commissioning with test and trial of 40 mm dia PN- 1.0 rating Kinetic Double Orific type Air Valves as per MJP's standard specifications having small orific elastic ball resting on agun metal orific , nipple, large orific, vulcantile ball seating on 80 MM DIA PN 1.0 |
| 5 | M. S. D/F PIPES & SPECIALS Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications. |
| 6 | Flanged Joints :- Providing and making flanged joints to flanged C.I./ M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. 150 mm dia |
| 7 | PROVIDING MS FLANGE |
| 8 | Pressure Gauge Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe |
| 9 | M.S.STRUCTURAL STEEL WORK Providing fabicating and fixing MS Structural Steel work for necesaary Support of Panel Board, Sluice Valve, Reflux Valve, Delivery Line and Lifting arrangement etc complete per detailed specifications attached. |
| 10 | AUTOMATIC CONTROL L.T. PANEL FOR 25 HP Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. 25 HP |
| 11 | EARTHING Supplying & erecting Galvanised cast iron plate 60 X 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg @ top for watering a break masonry block, C.I. cover complete with necessary length of double G.I. earth strip bolted with plate & covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos. |
| 12 | G. I. EARTHING STRIP/ WIRE Supplying & erecting G.I.strips 25 X 5 mm as per datailed specifications |
| 13 | Cables :- Providing erecting commissioning of cable 1 Run x 3.5 C x 95 sq.mm AL.XLPE Armoured cable from MSEB to Mains to Panel (Underground laying of Cable) |
| 14 | 1 x 3 x 10 sq.mm ALAR CABLE FOR CAPACITOR |
| 15 | 1 Run x 3.5C x 50 sq.mm AL.XLPE Armoured cable from MSEB to panel |
| 16 | 3C x 10 sq.mm Copper Submersible cable from Starter to Motor |
| 17 | Cable Glands & Lugs Terminatation etc |
| 18 | Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR |
| 19 | FOR FLOTTING ARRANGEMENT |
| 20 | SUB-ESTIMATE NO :02 PURE WATER RRAISING MAIN FROM DAM SUBMERGE AREA TO PRO WTP Providing & Supply of HDPE Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete. |
| 21 | Providing Air Valve Providing and supplying at site ductile iron / Spheroi- dal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) HIGH PERFORMANCE AIR Type PN -1 Air Valve 25 MM |
| 22 | Excavation in earth Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 23 | Excavation in hard murum Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 24 | Excavation in Soft rock Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 25 | Excavation in hard rock Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 26 | Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete. |
| 27 | Lowering, laying OPVC. pipe LLowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 200 mm OPVC 12.5 KG/CM^2 |
| 28 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 200 mm OPVC 12.5 KG/CM^2 |
| 29 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air Valve Single Ball (PN-1 and PN - 1.6) 25 MM |
| 30 | Providing and fixing in position air valve shaft Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) upto 150mm |
| 31 | Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M-150 |
| 32 | Steel bar reinforcement Providing and fixing in position tor steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires of 1.6 mm to 1.22 mm (about 16 to 18 gauge) or tack welding and supporting as required, etc. complete (including cost of binding wire). Tor Steel |
| 33 | Fixing of valve Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 100 mm dia for washout |
| 34 | Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner |
| 35 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 36 | SUB-ESTIMATE NO : 03 UNCONVENTIONAL WATER TREATEMENT PLANT CAP.1.0 MLD Designing (aesthetically), providing and constructing high rate Unconventional Water Treatment Plant i.e. Simplified Water Treatment Plants consisting of Civil Works, including cost of providing and applying Epoxy paint to inside surface of water retaining structures in contact with Chlorine and providing anti-termite treatment to entire structure below ground level, Mechanical and Electrical components of variours sub-works as given below : including necessary hydraulic testing, structural testing and trial run for 3 months, etc. complete as directed by Engineer-in-charge . |
| 37 | SUB-ESTIMATE NO : 4 Pure water Pumping Machinery SProviding, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283,with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suita ble for working on 415 V ± 10%, 3 Ph,50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire h ydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. 150 mm dia with TCTC Construction Mechanical seal Cap- 3 HP, Q-4.71 LPS, Head- 29 m |
| 38 | SLUICE VALVE Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete. 80 MM DIA PN-1 |
| 39 | REFLUX VALVE Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) 80 MM DIA PN-1 |
| 40 | KINETIC AIR VALVE Designing Providing erecting commissioning with test and trial of 40 mm dia PN- 1.0 rating Kinetic Double Orific type Air Valves as per MJP's standard specifications having small orific elastic ball resting on agun metal orific , nipple, large orific, vulcantile ball seating on 50 MM DIA |
| 41 | Providing erecting \\"B\\" class G.I. Pipe for suction & delivery GI MEDIUM CLASS |
| 42 | Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications. |
| 43 | Flanged Joints :- Providing and making flanged joints to flanged C.I./ M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. 80 mm dia |
| 44 | Pressure Gauge Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe |
| 45 | M.S.STRUCTURAL STEEL WORK Providing fabicating and fixing MS Structural Steel work for necesaary Support of Panel Board, Sluice Valve, Reflux Valve, Delivery Line and Lifting arrangement etc complete per detailed specifications attached. |
| 46 | AUTOMATIC CONTROL L.T. PANEL FOR 7.5 HP Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. 5 HP |
| 47 | Chain pully BLOCK WITH FRAME TROLLY Chain Pully Block + travelling Trolly - 1 MT capacity |
| 48 | providing and errecting providing ms flange |
| 49 | EARTHING Supplying & erecting Galvanised cast iron plate 60 X 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg @ top for watering a break masonry block, C.I. cover complete with necessary length of double G.I. earth strip bolted with plate & covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos. |
| 50 | G. I. EARTHING STRIP/ WIRE Supplying & erecting G.I.strips 25 X 5 mm as per datailed specifications |
| 51 | Cables :- Providing erecting commissioning of cable 1 Run x 3.5 C x 16 sq.mm AL.XLPE Armoured cable from MSEB to Mains to Panel (Underground laying of Cable) |
| 52 | 1 x 3 x 2.5 sq.mm ALAR CABLE FOR CAPACITOR |
| 53 | 3C x 2.5 sq.mm Copper Submersible cable from Starter to Motor |
| 54 | Cable Glands & Lugs Terminatation etc |
| 55 | Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR |
| 56 | Providing Tools |
| 57 | Indoor Light fittings |
| 58 | SUB-ESTIMATE NO : 05 PURE WATER RRAISING MAIN FROM PRO WTP TO EXIST.AND PROPOSED ESR Providing Air Valve Providing and supplying at site ductile iron / Spheroi- dal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) HIGH PERFORMANCE AIR VALVE PN -1 Air Valve 25 MM |
| 59 | Excavation in hard murum Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 60 | Excavation in Soft rock Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 61 | Excavation in hard rock Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 62 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 140 mm 6 kg/cm^2 |
| 63 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air Valve Single Ball (PN-1 and PN - 1.6) 25 MM |
| 64 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 65 | Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M-150 |
| 66 | Steel bar reinforcement Providing and fixing in position tor steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires of 1.6 mm to 1.22 mm (about 16 to 18 gauge) or tack welding and supporting as required, etc. complete (including cost of binding wire). Tor Steel |
| 67 | Fixing of valve Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 80 mm dia for washout |
| 68 | Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner |
| 69 | SUB-ESTIMATE NO : 06 RCC ESR OF CAP- 55000 Liter At Thakarwasti Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. |
| 70 | Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes |
| 71 | MS Special Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 72 | SUB-ESTIMATE NO : 07 RCC ESR OF CAP- 77,000 liter At KATKARIWASTI Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. |
| 73 | Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. |
| 74 | MS Special Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 75 | SUB-ESTIMATE NO : 08 RCC ESR OF CAP- 50000 liter At VARCHA GAON Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. |
| 76 | Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete. C.I D/F Specials for above pipes |
| 77 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 78 | SUB ESTIMATE NO:- 09 PROVIDING DISTRIBUTION SYSTEM PROVIDING GI PIPE Providing at site of work PVC / G.I. Pipes as mentioned below as per relevant IS specifications including all taxes, freight charges, octori, loading, unloading, transportation upto the site of work, paying Third Party ( approved by MJP ) inspection charges, guarding pipes till hydraulic test is given and line is commisioned etc. complete. 50 mm. GI MEDIUM |
| 79 | 65 mm. GI MEDIUM |
| 80 | 80 mm. GI MEDIUM |
| 81 | 100 mm. GI MEDIUM |
| 82 | 125 mm. GI MEDIUM |
| 83 | 150 mm. GI MEDIUM |
| 84 | HDPE Special Providing & Supply of HDPE Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete. |
| 85 | MS Special Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 86 | Excavation in soft soil Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 87 | Excavation for hard Murum Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) |
| 88 | Excavation in soft Rock Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 89 | Excavation for hard Rock Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc.complete. (Bd-A-5/259) |
| 90 | Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete. |
| 91 | Lowering, laying HDPE pipe Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II For all classes. 63 MM |
| 92 | 75 MM |
| 93 | 90 MM |
| 94 | 110 MM |
| 95 | 140 MM |
| 96 | 160 MM |
| 97 | Lowering, laying GI pipe LLowering, Laying and Jointing GI/CI pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 50 mm. GI MEDIUM |
| 98 | 65 mm. GI MEDIUM |
| 99 | 80 mm. GI MEDIUM |
| 100 | 100 mm. GI MEDIUM |
| 101 | 125 mm. GI MEDIUM |
| 102 | 150 mm. GI MEDIUM |
| 103 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 MM. |
| 104 | 75 MM |
| 105 | 90 MM |
| 106 | 110 MM |
| 107 | 140 MM |
| 108 | 160 MM |
| 109 | 180 MM |
| 110 | Hydraulic testing of GI pipe line Hydraulic testing of GI pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position 50 mm. GI MEDIUM |
| 111 | 65 mm. GI MEDIUM |
| 112 | 80 mm. GI MEDIUM |
| 113 | 100 mm. GI MEDIUM |
| 114 | 125 mm. GI MEDIUM |
| 115 | 150 mm. GI MEDIUM |
| 116 | Providing and laying in citu cement concrete Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) PCC - M-150 |
| 117 | Fixing of valve Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm dia |
| 118 | 65 mm dia |
| 119 | 80 mm dia |
| 120 | 100 mm dia |
| 121 | 125 mm dia |
| 122 | 150 mm dia |
| 123 | Road Box Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 225 mm x 300 mm (40 kg) |
| 124 | Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. Size (0.6 x 0.9 x 1.2) |
| 125 | Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-incharge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) 80 mm |
| 126 | Making Property connections Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour, UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer in For MDPE/UPVC Pipe Service Connection on Disribution main For 15 mm dia. Connection on HDPE Pipes (Without Road Crossing) |
| 127 | For 15 mm dia. Connection on HDPE Pipes (With Road Crossing) |
| 128 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 129 | Lettering for informatory sign boards etc. complete. |
| 130 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coaof Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paincomplete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec Number As directed by Engineer in Charge |
| 131 | SUB-ESTIMATE NO : 10 TRIAL RUN AND MAINTENANCE OF SCHEME Commissioning, running and maintaing the scheme to its rated capacity, including providing necessary personnel such as operator, valveman,labour etc as per requirement of the scheme for a period of 1 Month together with training to the Local Body maintenance staff and handing over the scheme to local Body after completion of the above period as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender