Tender For Special Repair To Bldg No P-506 At Fort Area Nagpur Under Ge K Tee.
Tender Value
49.18 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
98360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-506 At Fort Area Nagpur Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and as directed. |
| 3 | M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as specified and as directed. |
| 4 | Diemolition of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and as directed. |
| 5 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 6 | M&L for Brickwork with flyash bricks, straight or curvedon plan to any radius in half brick thick walls,built in, built in cement mortar (1:6) complete all as specified and directed. |
| 7 | Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as directed. |
| 8 | M&l for rendering 15mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed. |
| 9 | M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and as directed. |
| 10 | Supply only liquid water proofing admixture complete all as specified and as directed. |
| 11 | M&L for rendering 5mm thick in cement plaster in cement mortar 1:3 , finished even and smooth without using extra cement at ceiling complete all as specified and as directed. |
| 12 | M&L joint free double charge vitrified tile 10mm mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 13 | M&L joint free double charge vitrified tile 10mm mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. |
| 14 | M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 15 | M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. |
| 16 | Material & labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 17 | Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and as directed. |
| 18 | M&L for formwork to chullah hoods, chajjas troughs and similar items including edges etc complete all as specified and as directed. |
| 19 | M&L RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in chajjas etc complete all as specified and as directed. |
| 20 | Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed. |
| 21 | Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed. |
| 22 | Taking down shutters of any description n. exc. 2.00 Sqm complete all as specified and directed. |
| 23 | S&F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 24 | S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel complete all as specified and as directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and no toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 26 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 27 | Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted. |
| 28 | S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed. |
| 29 | S&F factory made solid Flush PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed. |
| 30 | All as per above item 29.00 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all a specified and directed. |
| 31 | S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified and as directed. |
| 32 | S&F S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 33 | S&F for 300 mm aluminium anodises sliding door bolts, with hasp, clips of nsheet, cast or extruded section and fixing bolts and sections or cast -aluminum alloy and fixed complete all as specified and as directed. |
| 34 | S&F 150 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed. |
| 35 | S&F for 150 mm aluminium handles cast type anodised complete all as specified and as directed. |
| 36 | S&F for 150mm floor door stopper of anodised aluminium alloy fixed complete all as specified and as directed. |
| 37 | S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed. |
| 38 | S&F Anodised aluminium window and ventilator shutters, door side hung type/Sliding type without sash bars, aluminium sections weighing 0.9 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 39 | S&F Anodised aluminium window and ventilator shutters, door side hung type/Sliding type without sash bars, aluminium sections weighing 0.9 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender