Tender For Repair / Replacement Of Street Lights, Solar Operated Eqpts Lights, Lightening Conductor, High Mast Lights And Repair / Maintenance Of Dg Sets, Amf Panels Etc At Fort Area Nagpur Under Ge K Tee And Repair/Replacement Of Lt Ug Cable, Cable
Tender Value
29 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
9 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Street Lights, Solar Operated Eqpts Lights, Lightening Conductor, High Mast Lights And Repair / Maintenance Of Dg Sets, Amf Panels Etc At Fort Area Nagpur Under Ge K Tee And Repair/Replacement Of Lt Ug Cable, Cable Junction Box, Steet Light Fitting, Pole Painting And Other E/M Works At Certain Unit Under Ge K Tee.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Corrigendum No. 01 | BOQ | 30-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix in replacemnet of air terminal single pointed aluminium rod 12 mm dia and 300 mm long, complete all as specified and as directed. |
| 2 | M & L in replacemnet of test point terminal block made of gun metal or phosphoras bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long n.exc height head screw complete all as specified and directed |
| 3 | S & F in replacement of aluminium strip 25x3.15 mm with saddles and fixing screw etc for roof and down conductors and above ground complete all as specified and directed |
| 4 | Supply and fix in replacement of GI tubing and fitting, 40 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including all fittings like socket bend etc and taking up or down and necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site including taking down old unsv pipes complete all as specified and as directed. |
| 5 | M&l for repair of Pre-cast cement concrete block masonary with solid blocks exc 10 cm in width and setting in mortor complete type B-1, 1:2:4 (20 mm graded aggregated) for fixing GI pipe for air termination rods) complete all as specified and directed |
| 6 | Supply and fix in repair LED street light luminaires of capacity 60 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection and efficacy minimum 120 Lumen per watt, complete with driver, including three core copper flexible wire of size 0.75 Sqmm for connection from street light fitting to OH line or junction box, fixing accessories and complete all as specified and directed. |
| 7 | Supply and fixing in replacement of LED Flood light 200 watts new generation, energy saving and environmental friendly long life(coolwhite/warm white) made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type , IP 66 complete all as specified and directed. |
| 8 | Supply and fixing in replacement of LED Flood light 100 watts new generation, energy saving and environmental friendly long life(coolwhite/warm white) made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type , IP 66 complete all as specified and directed. |
| 9 | Supply and fixing of Smart integrated 30 Watt Smart Bright, All in one Solar Street Light ,Overcharged & deep discharge protection for battery, MPPT solar charge controller, LiFeP04 lithium Ferro Phosphate battery, maintenance free system, inbuilt BMS system, IP-65, lumen output ≥ 1500 Lm, Colour temp 5700K, Surge protection 5 KV, 50000 burning hrs (min), including nuts, bolts, washers complete all as specified and directed |
| 10 | Supply and fixing of Smart integrated 40 Watt Smart Bright, All in one Solar Street Light ,Overcharged & deep discharge protection for battery, MPPT solar charge controller, LiFeP04 lithium Ferro Phosphate battery, maintenance free system, inbuilt BMS system, IP-65, lumen output ≥ 1500 Lm, Colour temp 5700K, Surge protection 5 KV, 50000 burning hrs (min), including nuts, bolts, washers complete all as specified and directed |
| 11 | S&F in replacement onload changeover switch 100 Amps, 4 Pole, 415 V in sheet steel enclosure suitable for fixing on wall at existing position, including with all incoming and outgoing connection with cable lugs, washers, nutbolts and accessories complete with taking down old unserviceable changeover switch complete all as specified and directed |
| 12 | S&F in replacement onload changeover switch 250 Amps, 4 Pole, 415 V in sheet steel enclosure suitable for fixing on wall at existing position, including with all incoming and outgoing connection with cable lugs, washers, nutbolts and accessories complete with taking down old unserviceable changeover switch complete all as specified and directed |
| 13 | Supply and fixing in repair retro reflective boards in shape of rectangle of size 1.0 m x1.4 m made out of 2 mm thick stainless steel both side bounded/pasted with high prismatic (iv) sheet mannufactured by avery dennison or 3 M with desired letters/logos designed as directed the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. Note :(i) Rate for fixing of boards with PCC 1:2:4 type B2 filling of size 45x45x60 cm to be incl in unit rate. (ii) The board should be written description as direction given by Engineer-in-Charge) |
| 14 | Supply and fix street light timer switch with voltage mounting device enclcosed in SMC Enclosure for automatic and manual switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure complete made out of anti rust/ shock proof/ termite proof/ confirming to IP 54 suitable for 5-8 KW (40 Amp) load compete all as specified and directed |
| 15 | Supply, fixing and testing of in replacement of Automatic Street light Timer Switch using combination of NATURE SWITCH for automatic switching of street lights based on LUX level of natural light consisting with Sensor (Natural Switch) along with suitable power contractor, MCB and support terminals should be enclosed in pole/ wall mountable SMC enclosure made out of Rust proof, Electric shock proof, termite proof and FR grade SMC junction Box conforming to IP 54 protection of capacity 12 KW 3 phase, current range 40 Amps, 4 wire (3 separate power contactor) including all accessories and fixing arrangement complete all as specified and as directed. |
| 16 | M&L for Servicing of 58.5 KVA DG Set, including greasing of nipples, draining of unserviceable engine oil by unscrewing drain plug cap, and other moving parts of engine and alternator as per manufacturer’s instructions opening cleaning and re connecting of battery terminals and apply petroleum jelly, checking of coupling and replace it if required, Checking of engine oil leakage if any by replacing gasket, tightening of all nuts and bolts etc, removing radiator completely and cleaning as per manufacturer instructions and refitting the same, check the tightness of fan belts if found loose to be tightened. draining of water accumulated in filter or separate in fuel line including complete fuel tank drying and cleaning re filling of drain out fuel, checking of all electric connections in AMF & LT panel board, switches and contactors etc, checking of free rotation of fly wheel/ shaft of generator and testing to the satisfaction of Engr-in-Charge, complete all as specified and directed. |
| 17 | M&L for Servicing of 25 to 35 KVA DG Set, including greasing of nipples, draining of unserviceable engine oil by unscrewing drain plug cap, and other moving parts of engine and alternator as per manufacturer’s instructions opening cleaning and re connecting of battery terminals and apply petroleum jelly, checking of coupling and replace it if required, Checking of engine oil leakage if any by replacing gasket, tightening of all nuts and bolts etc, removing radiator completely and cleaning as per manufacturer instructions and refitting the same, check the tightness of fan belts if found loose to be tightened. draining of water accumulated in filter or separate in fuel line including complete fuel tank drying and cleaning re filling of drain out fuel, checking of all electric connections in AMF & LT panel board, switches and contactors etc, checking of free rotation of fly wheel/ shaft of generator and testing to the satisfaction of Engr-in-Charge, complete all as specified and directed. Notes for Item No 14 & 15 above:- Rate quoted by Contractor shall deemed to be included following provisions:- (a) Engine oil shall be measured and paid seperatly in respective item. (b) Sufficient/required man power employed for the servicing purpose, T&P used and other petty items such as cotton waste kerosene oil, nuts and bolts etc and any ther minor items. (b) Replacement of spares will be measured and paid separately as supply only under respective items. |
| 18 | Supply only Air filter 58.5 KVA complete all as specified and directed |
| 19 | Supply only Lube Oil Filter & By-pass Filter 58.5 KVA complete all as specified and directed |
| 20 | Supply only Fuel Filter 58.5 KVA complete all as specified and directed |
| 21 | Supply only Piston Kit 58.5 KVA complete all as specified and directed |
| 22 | Supply only Piston Ring Set 58.5 KVA complete all as specified and directed |
| 23 | Supply only Gasket Set 58.5 KVA complete all as specified and directed |
| 24 | Supply only Starter Motor 58.5 KVA complete all as specified and directed |
| 25 | Supply only DG set Controller 58.5 KVA complete all as specified and directed |
| 26 | Supply only Air filter 25 KVA to 35 KVA complete all as specified and directed |
| 27 | Supply only Lube Oil Filter & By-pass Filter 25 KVA to 35 KVA complete all as specified and directed |
| 28 | Supply only Fuel Filter 25 KVA to 35 KVA complete all as specified and directed |
| 29 | Supply only Piston Kit 25 KVA to 35 KVA complete all as specified and directed |
| 30 | Supply only Piston Ring Set 25 KVA to 35 KVA complete all as specified and directed |
| 31 | Supply only Gasket Set 25 KVA to 35 KVA complete all as specified and directed |
| 32 | Supply only water/fuel pump 25 KVA to 35 KVA complete all as specified and directed |
| 33 | Supply only Alternator Assembly 25 KVA to 35 KVA complete all as specified and directed |
| 34 | Supply only radiator coolant concentrate complete all as specified and as directed. |
| 35 | Supply only Lubricant oil 15W 40 complete all as specified and directed |
| 36 | Suplly only distilled water in supplier's packing complete all as specified and directed |
| 37 | Supply only battery terminals as per sample complete all as specified and directed |
| 38 | Supply only rubber hose pipe complete of suitable sizes for DG sets 25 KVA to 58.5 KVA complete all as specified and directed |
| 39 | Supply only Fan belt as per sampler for dynamo/ alternator of suitable sizes for DG sets of capacity from 25 KVA to 58.5 KVA complete all as specified and directed |
| 40 | Supply and fix in replacement automatic voltage regulator (AVR) suitable for the DG Set 25 KVA to 58.5 KVA complete all as specified and directed |
| 41 | S&F in replacement of MCX-11/22/MNX A-2 power contactor 100-110 Amp, 4 pole, 415 Volt with front mounted on din rail suitable for DG set of capacity 58.5 KVA (Cummins) complete all as specified and directed |
| 42 | S&F in replacement of MCX-13 power contactor 65-80 Amp, 4 pole, 415 Volt with front mounted on din rail suitable for DG set of capacity 35 KVA (Cummins) complete all as specified and directed |
| 43 | S&F in replacement of TC1D40/MCX-4 power contactor 40 Amp, 4 pole, 415 Volt with front mounted on din rail suitable for DG set of capacity 25 KVA (Ashok Leyland) complete all as specified and directed |
| 44 | S&F in replacement of MCX-11/MNX A-2 power contactor 50-55 Amp, 4 pole, 415 Volt with front mounted on din rail suitable for DG set of capacity 30 KVA complete all as specified and directed |
| 45 | S&F in repair MCCB 40 to 63 Amps 4 Pole, 415V, Adjustable type, with breaking capacity 16 KA, Ics=100% of Icu, complete all as specified and directed |
| 46 | S&F in repair MCCB 100-125 Amps 4 Pole, 415V, Adjustable type, with breaking capacity 25 KA, Ics=100% of Icu, complete all as specified and directed |
| 47 | Material and labour for taking down old unserviceable Alternator from DG set 25 KVA to 58.5 KVA, for rewinding of stater, armature using high-grade, insulated copper wire and refixed to the existing position after rewindinding, including replacement of suitable size bearing complete all as specified and directed.Note : M&L for rewinding with existing size copper wire will be paid under separate item only |
| 48 | M&L for Rewinding of stater, armature using high-grade, insulated copper wire of same gauge and size of 25 KVA to 58.5 KVA, DG Set complete all as specified and directed |
| 49 | Material and labour for taking down unserviceable self starter from DG set of capacity 25 KVA to 58.5 KVA 12V, for complete replacement and refixed to the existing position after rewinding, including replacement of suitable size bearing complete all as specified and directed. Note : M&L for rewinding with existing size copper wire will be paid under separate iteme only. |
| 50 | Material and lablour for taking down radiator of DG set of capacity from above 25 KVA to 58.5 KVA at site and cleanning its fins externaly by air pressure and washed internaly by cleaning agent carefully and fiixing its original position after checking any leakage complete all as specified and directed |
| 51 | Supply and fix in replacement lubricant oil filter element with washer suitable for DG set of capacity from 25 KVA to 58.5 KVA complete all as specified and directed |
| 52 | S&F in replacement unserviceable canopy door lock suitable for all type and size complete all as specified and directed |
| 53 | Material and labour for replacement of fuel tank cap with locking arrangement complete all as specified and directed |
| 54 | S&F in replacement Battery Lead Acid cell 12 V, 100 AH (for DG set) complete all as specified and directed |
| 55 | S&F in replacement battery charger 12 V/24V (SMPS) for DG set ccomplete all as specified and directed |
| 56 | S&F in replacement 24 V play relay suitable for DG set complete all as specified and directed |
| 57 | S&F in replacement VMR for AMF panel complete all as specified and directed |
| 58 | S&F in replacemet CT Suitable for DG set upto 25/30/35/58.5 KVA complete all as specified and directed |
| 59 | S&F in replacemet HRC fuse of any capacity Amp with base assembly suitable of existing structure complete all as specified and directed |
| 60 | M&L for dismantling of defective water pump assembly by disconnecting of hose pipe connections, fan felt and radiator connection. Supply and fixing of new water pump assembly automatic grade suitable for DG set capacity of 25 KVA to 58.5 KVA of any make of DG set engine with all fitting accessories complete all as specified and directed |
| 61 | M & L for attending emergent complaint on call basis, checking of DG Set (capactiy 25 KVA to 58.5 KVA ) & AMF Panel (any type and size) for detecting any kind of fault in DG Set & AMF Panel and attending the fault immediately at any time round the clock and carry out certain repair as per site requirement and checking of DG Set and AMF Panel and replacing of worn out parts of DG Set & AMF Panel by expert Engineer, complete all as specified and directed.Note : (a) Charges for detecting the fault in DG Set/AMF Panel/Electric System are included in the quoted items rate.(b) Amount of minor repairs, nut-botls-washers, cleaning cloth, grease etc are included in the quoted items rate.(c) Repalcement of worn out major parts of DG Set/AMF Panel shall be measured and paid separately under items of schedule 'A'. |
| 62 | M&L for disconnecting, dismantling and overhauling of fuel injector pump of DG set capacity 25 KVA to 58.5 KVA and refixing properly to original position after replacement of Nozzle, F.I.P. Elements, Delivery valve, fuel pump gear and unserviceable parts etc. including overhauling, calibration and testing at admissible pressure properly complete all as specified and directed. Please Enable Macros to View BoQ information |
| 63 | M&L for disconnecting, dismantling and overhauling of fuel injector pump of DG set capacity 25 KVA to 58.5 KVA and refixing properly to original position after replacement of Nozzle, F.I.P. Elements, Delivery valve, fuel pump gear and unserviceable parts etc. including overhauling, calibration and testing at admissible pressure properly complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender