Tender For Repair/ Replacement Of Unsv Lt Distribution Board Lt Cables Fault Indication Rerouting Of Cable Lt Panel Including Necessary Earthing Arrangement At Bhdc Under Ge (East) Delhi Cantt-10
Tender Value
39.96 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
9 days left
EMD
79930
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Unsv Lt Distribution Board Lt Cables Fault Indication Rerouting Of Cable Lt Panel Including Necessary Earthing Arrangement At Bhdc Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Localization, pinpointing, and exposure of underground faults in the existing LT (Low Tension) XLPE/PVC armored cable network by deploying a specialized technical team and a professional underground cable fault locator machine (comprising a Time-Domain Reflectometer/TDR, surge generator/thumper, and acoustic pinpointer) including conducting preliminary insulation resistance and continuity tests, precisely tracing and pinpointing the exact fault location to minimize surface damage, carefully excavating the soil or lifting ducts/paving to safely expose the damaged cable section without affecting adjacent utility lines, verifying the fault boundaries to make the cable ready for straight-through jointing or splicing, and subsequently backfilling, compacting, and restoring the surface to its original condition including debris removal, all executed in strict compliance with IS: 1255 and standard safety protocols complete in all aspect all as specified and as directed. |
| 2 | M&L for supply and laying of ISI-marked, 1100V grade, LT (Low Tension) Aluminum conductor, XLPE insulated, PVC inner-sheathed, galvanized steel strip/wire armored, and PVC outer-sheathed power cable of specified size and core including handling and unrolling the cable from drums, laying it directly in the ground in a standard excavated trench complete in all aspect all as specified and as directed. |
| 3 | Description all as per srl item No 2.00 here-in-before but for 630 Sqmm 3.5 core complete in all aspect. |
| 4 | Description all as per srl item No 2.00 here-in-before but for 500 Sqmm 3.5 core complete in all aspect. |
| 5 | Description all as per srl item No 2.00 here-in-before but for 240 Sqmm 3.5 core complete in all aspect. |
| 6 | Description all as per srl item No 2.00 here-in-before but for 185 Sqmm 3.5 core complete in all aspect. |
| 7 | Description all as per srl item No 2.00 here-in-before but for 120 Sqmm 3.5 core complete in all aspect. |
| 8 | Description all as per srl item No 2.00 here-in-before but for 70 Sqmm 3.5 core complete in all aspect. |
| 9 | Description all as per srl item No 2.00 here-in-before but for 50 Sqmm 3.5 core complete in all aspect. |
| 10 | Description all as per srl item No 2.00 here-in-before but for 35 Sqmm 3.5 core complete in all aspect. |
| 11 | Description all as per srl item No 2.00 here-in-before but for 25 Sqmm 3.5 core complete in all aspect. |
| 12 | Description all as per srl item No 2.00 here-in-before but for 16 Sqmm 4 core complete in all aspect. |
| 13 | Description all as per srl item No 2.00 here-in-before but for 10 Sqmm 2 core complete in all aspect. |
| 14 | Taking down of old unsv UG cable from trench of any size and capacity complete |
| 15 | M&L for straight-through jointing kits suitable for 1100 Volt grade, multi-core, XLPE/PVC insulated, aluminum/copper conductor, armored Low Tension (LT) underground power cables, complete with heat-shrinkable/cast-resin insulating sleeves, high-conductivity mechanical/ crimping ferrules, stress control tubing, mastic sealants, earth continuity copper braid, galvanized steel armor clamps, and all other necessary jointing accessories, executed by a certified and experienced cable jointer, including required excavation, backfilling, and minor civil works to ensure a completely water-tight and electrically sound joint, conforming to relevant IS/IEC standards; approved makes: Raychem (TE Connectivity)/ 3M or Yamuna Denso. |
| 16 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 25-50 sq mm complete. |
| 17 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 70-120 sq mm complete. |
| 18 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 150-185 sq mm complete. |
| 19 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 240 sq mm complete. |
| 20 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 500 sq mm complete. |
| 21 | Description all as per srl item no 4.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 630 sq mm complete. |
| 22 | Supply and fixing of heavy-duty, long-barrel, electro-tinned Aluminium crimping lugs (thimble) suitable for 1100 Volt grade, multi-core, XLPE/PVC insulated, aluminium conductor Low Tension (LT) power/control cables, featuring a properly sized stud hole for secure termination, including deep-indent hex crimping using a calibrated hydraulic tool, application of oxide-inhibiting conductive paste to prevent galvanic corrosion at the contact interface, and finishing with a color-coded heat-shrinkable PVC sleeve for phase identification and insulation, conforming to IS 5082 and IS 8309 standards complete all as specified. Make :- Dowells/ Cosmos/ Comet |
| 23 | Description all as per srl item no 5.00 but for cable size 16 sqmm to 35 sqmm |
| 24 | Description all as per srl item no 5.00 but for cable size 50 sqmm to 70 sqmm |
| 25 | Description all as per srl item no 5.00 but for cable size 95 sqmm to 120 sqmm |
| 26 | Description all as per srl item no 5.00 but for cable size 150 sqmm to 185 sqmm |
| 27 | Description all as per srl item no 5.00 but for cable size 240 sqmm |
| 28 | Description all as per srl item no 5.00 but for cable size 320 sqmm to 400 sqmm |
| 29 | Description all as per srl item no 5.00 but for cable size 500 sqmm |
| 30 | Description all as per srl item no 5.00 but for cable size 630 sqmm |
| 31 | Material & Labour including tools and equipment for the execution of manual boring / trenchless underground thrust boring of horizontal holes beneath existing roads, pavements, and hard-standing surfaces, including the supply, handling, and laying of a 200 mm diameter High-Density Polyethylene (HDPE) sleeve pipe suitable for a 0.4 MPa working pressure, alongside the installation of heavy-duty Galvanized Iron (GI) pipes inside the bore for smooth cable entry and mechanical protection, ensuring all pipes are installed at the specified depth and alignment without disturbing or damaging the overlying surface or surrounding utilities complete with the construction of entry/exit pits, manual soil excavation, removal of muck, pipe jointing, alignment checks, and subsequent backfilling, compaction, and structural reinstatement of the pits to their original condition complete all as specified and directed. |
| 32 | M&L for complete cleaning, clearing, and leveling of the outdoor substation yard and areas adjacent to LT control panels, including cutting, uprooting, and disposal of all wild grass, weeds, and shrubs; application of approved non-hazardous weed killers to prevent regrowth; removal of debris, dry leaves, and scrap; leveling, dressing, and compacting of the ground surface around panel foundations to ensure proper drainage; raking and uniform spreading of existing gravel layers and safe transport and disposal of all cleared waste outside plant premises complete in all aspects all as specified and as directed. Please Enable Macros to View BoQ information |
| 33 | M&L for complete cleaning, clearing, and leveling of the outdoor substation yard and areas adjacent to LT control panels, including cutting, uprooting, and disposal of all wild grass, weeds, and shrubs; application of approved non-hazardous weed killers to prevent regrowth; removal of debris, dry leaves, and scrap; leveling, dressing, and compacting of the ground surface around panel foundations to ensure proper drainage; raking and uniform spreading of existing gravel layers and safe transport and disposal of all cleared waste outside plant premises complete in all aspects all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender