Tender For Special Repair / Replacement Of Rising Mains And Distribution Pipe Lines And Connected Accessories At Civil Lines Under Ge K Tee.
Tender Value
30.10 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
60200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair / Replacement Of Rising Mains And Distribution Pipe Lines And Connected Accessories At Civil Lines Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position, complete all as specified and as directed. |
| 2 | Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 3 | Removing of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and as directed. |
| 4 | Supply and fix GI tubing and fitting, 100 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 5 | Supply and fix GI tubing and fitting, 80 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 6 | Supply and fix GI tubing and fitting, 50 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 7 | Supply and fix GI tubing and fitting, 40 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 8 | Supply and fix GI tubing and fitting, 25 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 9 | Supply and fix GI tubing and fitting, 20 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 10 | Supply and fix GI tubing and fitting, 15 mm bore medium grade from wall/ trenches and disconnecting from main distribution lines including taking up or down and necessary cutting of existing pipe line, threding the same and dewatering work as required and removing from site, including bend, tee, union etc complete all as specified and as directed. |
| 11 | Supply and fix High density polyethylene pipes (HDPE) grade PE-100 of size 50 mm pressure rating 6 kgf/cm2 laid in trenches including taking up or down and necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and as directed. |
| 12 | Supply and fix High density polyethylene pipes (HDPE) grade PE-100 of size 40 mm pressure rating 6 kgf/cm2 laid in trenches including taking up or down and necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and as directed. |
| 13 | Supply & fixing in repair 80 mm bore , cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality including taking down of old u/s sluice valve, complete all as specified and directed. |
| 14 | Supply & fixing in repair 100 mm bore , cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality including taking down of old u/s sluice valve, complete all as specified and directed. |
| 15 | Supply and fix inrepair CI Non-return valve Ball type double end flanged/ drilled, PN-10 with including necessary cutting of existing delivery pipe line of any type and welding, jointing and jointing materials such nuts, bolts, washers, flange and rubber gaskets etc for the pipe of 100/80 mm bore with reinforced rubber nitrile ball including taking out unserviceable CI non return valve complete all as specified and directed. |
| 16 | Supply & fixing in repair 50 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality including taking down old unsv valves, complete all as specified and directed. |
| 17 | Supply & fixing in repair 40 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality including taking down old unsv valves, complete all as specified and directed. |
| 18 | Supply & fixing in repair 25 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality including taking down old unsv valves, complete all as specified and directed. |
| 19 | Supply & fixing in repair 20 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality including taking down old unsv valves, complete all as specified and directed. |
| 20 | Supply & fixing in repair Ball valves for pipe size 25mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25-455gms) and fixed ISI Marked approved quality including taking down old unsv valves,complete all as specified and directed. |
| 21 | M & L for CI fitting for spigot & socket end pipes such as Bends (any type, radius and angle), Tapers any type (Straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs and mechanical joints etc upto 150 mm bore including removing/ dismantling of old CI fittings complete all as specified and directed. |
| 22 | M & L for Cutting out of hard standing,concrete blocks,slabs,brickwork or stone masonry (in alter nate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials with complete and making good to the disturbed surface by using PCC of C1, 20 mm Grade 1:3:6 up to the depth for laying of water pipe line in soil complete all as specified and directed. |
| 23 | Demolition of old valve pit chamber and M&L for Construction of valve pit chamber of size 900 x 900 x 900 mm with 15 Cm thick PCC foundation in 1:4:8 type D2 ( using 40 mm graded stone aggregate) and 15 cm thick hard core, brick masonary work with flyash bricksbuilt in CM (1:6), 15 mm thick internal & external plastering in CM (1:4), MS sheet cover 4 mm thick including 50 x 50 x 5 mm MS angle frame fixed in coping of PCC 1:2:4 type B-1 ( using 20 mm stone aggregate) making hole in valve chamber cover as per sluice valve location in side the valve chamber for insurtion of MS rod of 12 mm dia of 1.5m long along with valve spindle cap properly welded to ms rod with locking arrangement & painting with one coat of red oxide & two coats of black bituminous paint complete all as specified & directed |
| 24 | Material and labour for PCC Type B2 ,1:2:4 by using (40 mm aggregatestone aggregate) in foundation,road cutting etc upto 60 cm in height, copings, complete all as specified and directed. |
| 25 | Supply and lay MS Pipes of size 100/150 mm heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes as shown, complete all as specified and directed |
| 26 | Supply and lay in replacement Pipe cast Iron, S/S including specials, Class\\"B\\", 150mm(8\\") dia, complete all as specified and directed |
| 27 | M&L for Indoor type cubical panel board made out of 2.0 mm thick CRCA sheet and made M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shelland made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 (minimum height 2 feet) mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following :-(a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 250 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.(b) Incommer MCCB, 4 pole having current ratings 160 Amps, AC 415 Volts, with Icu= 25 KA , Ics = 100% of Icu, with microprocessed type complete with spreader links- Qty - 01 No (c) Onload Changeover switch 160 Amp - 01 No (d) MCCB, 4 pole having current ratings 63 Amps, AC 415 Volts, with Icu= 16 KA, Ics = 100% of Icu, with thermal magnetic release, complete with spreader links- Qty - 04 Nos (e) Motor Starter Type MOG-H2 (Rotary Type) - Frame 2 of capacity 32 Amps with short circuit and overload protection -04 Nos (f) Multifunction meter for measure,current of Amp, Voltage and Frequency.(g) LED Indicator lamp - 01 Set of Three. |
| 28 | Material and Labour for uprooting vegitation,bushes,creepers,weeds ,including trimming of branches of trees touching inside sub stations/pumping stn/over head reservoir area,under ground sump area with the help of spade,crowbar,axes or any other tools mannually/chemical spraying, complete all as specfied and as directed. |
| 29 | M&L for dewatering the water from sump, by any means and clean the interior portion of sump (bottom and sides of walls) by means of coir/wire brush etc. and wash the interior portion of sump by using bleaching powder @ 25 grams per 1000 ltrs of water after removal of sludge, mud etc. to a distance not exc. 50m and one coat of cement based paint on external RCC / masonry surface of reservoir, one coat of epoxy paint on all steel surfaces such as ladder, railing etc.and writing letters with white paint (Date of cleaning and capacity of sump / reservoir) on black painted surface and clear away all vegetations, sapling, under growth roots etc. and trees not exc. 30cm girth upto 3m around the periphery of the sump / structure from external wall surfaces and removing rubbish not exc. 50m for the any capacity of under ground sumps complete all as specified & as directed. |
| 30 | M&L for cleaning of RCC over head reservoirs/steel tanks by brooming down all the side walls, bottom and top, removing fungus, scales dirt sludge etc. from inside and depositing the same at a distance not more than 100 mtrs after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, costic soda etc and applying one coat of white wash on internal surface of the tank and one coat of cement base paint (snocem) on external surface of the tank and writing date of cleaning in white capital letters on black back ground, size of letters 80 x 10mm with sythetic enamel paint and marking the direction of flow and painting all inlets, outlets, washouts and overflow pipes with one coat of black epoxy paint complete including draining of excess water in tank by providing pump,cleaning vegitation from tank/sump site of 10 mtr distance from plinth all as specified and as directed and all safety measures are to be adopted while performing including arresting the leakages and removing growths on OHT walls, complete all as specified and directed Please Enable Macros to View BoQ information |
| 31 | M&L for cleaning of RCC over head reservoirs/steel tanks by brooming down all the side walls, bottom and top, removing fungus, scales dirt sludge etc. from inside and depositing the same at a distance not more than 100 mtrs after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, costic soda etc and applying one coat of white wash on internal surface of the tank and one coat of cement base paint (snocem) on external surface of the tank and writing date of cleaning in white capital letters on black back ground, size of letters 80 x 10mm with sythetic enamel paint and marking the direction of flow and painting all inlets, outlets, washouts and overflow pipes with one coat of black epoxy paint complete including draining of excess water in tank by providing pump,cleaning vegitation from tank/sump site of 10 mtr distance from plinth all as specified and as directed and all safety measures are to be adopted while performing including arresting the leakages and removing growths on OHT walls, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender