Tender For Welcome Maintenance Including Day To Day Petty Repairs In Hamla Md Officers Accn Area At installation Hamla Under Ge (Nw) Bhandup
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Including Day To Day Petty Repairs In Hamla Md Officers Accn Area At installation Hamla Under Ge (Nw) Bhandup
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed. |
| 2 | M & L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed. |
| 3 | M & L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots touch up with putty as required places and thereafter applying one coat of cement base paint complete all as specified and directed. |
| 4 | M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat oil bound distemper with roller complete all as specified and directed. |
| 5 | M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed. |
| 6 | M & L white cement based Wall care putty not less than 1mm thick on wall / ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed. |
| 7 | M & L for preparation of old decorated surfaces of walls any description not otherwise described over 10 cm width or girth and applying one coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed. |
| 8 | M & L for preparation of old decorated surfaces of ceiling any description not otherwise described over 10 cm width or girth and applying two coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed. |
| 9 | M & L for preparation of old decorated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M & L for preparation of old decorated steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M & L for preparation of old surfaces of walls / slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including washing down, with water and applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc, complete all as specified and as directed. |
| 12 | M & L for cutting out cracks (not exceeding 5 mm) to V-section in existing wall / chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed. |
| 13 | M & L for complete removal of existing treatment on surfaces of walls, chajjas etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt, chalk, grease, fungus, flakes etc applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldings complete all as specified and directed. |
| 14 | Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials outside MD land including necessary scaffoldings complete all as specified and directed. |
| 15 | M & L for rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed. |
| 16 | M & L for rendering 5 mm thick in CM (1:3) as in ceiling finishing even and smooth (without using extra cement) etc complete all as specified and directed. |
| 17 | M & L for rendering 15mm thick in (1:4) CM (in two coats (10+5mm)) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately. |
| 18 | M & L for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and directed. |
| 19 | M & L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 20 | M & L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed. |
| 21 | M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed. |
| 22 | M & L for one or more coat of french polishing on surfaces of any description width or girth including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces etc complete all as specified and directed. |
| 23 | M & L for writing letter or figures (block, Roman, Italic, or Indian) not exceeding 30 cm height complete all as specified and directed. |
| 24 | M & L for stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed. |
| 25 | M & L for Removal of plant growth by injection with chemical glyphospate solution (4 % conceneration) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concent) diluted with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painting with cement base or acrylic paint complete all as specified and directed by Engineer-in-charge. |
| 26 | M & L for rendering 15 mm thick on fair faces of brick / concrete surfaces in CM (1:4) finished even and fair complete all as specified and directed. |
| 27 | M & L for 5 mm thick CM (1:4) ready mix plaster over concrete surfaces of ceiling surfaces, surfaces finished even and smooth including necessary scaffolding complete all as specified and directed. |
| 28 | M & L for preparation of new plastered surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 29 | M & L for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 30 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed. |
| 31 | M & L for day to day repairs to WHB & WC with fittings like as leaking bib taps, pillar taps, mixers, stop cocks any tightening and providing washer, repair to float valves, repairs to internal assemble low level cistern by adjustments, etc as required at site as per the satisfaction of user as assigned complete all as specified and directed. |
| 32 | S & F readymade pulley operated clothes drying system including of four aluminium pipes of 9 feet long each (4pipes) channel assembly locking system ropes and all fixing material complete all as specified and directed . Make Easy Dry or equivalent make as approved by CE Southern Command Pune. |
| 33 | Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed. |
| 34 | Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 sqm complete all as specified and directed. |
| 35 | Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm complete all as specified and directed. |
| 36 | Resecuring or easing & adjusting without taking down door shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm complete all as specified and directed. |
| 37 | Taking down door / window shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed. |
| 38 | Taking down door / window shutter of any description not exceeding 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as required etc complete all as specified and directed. |
| 39 | Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing not exceeding 0.5 sqm each with rubber and aluminium beading / packing with rubber gasket complete all as specified and directed. |
| 40 | Supply & fixing in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 41 | S & F second class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed all as specified and directed. |
| 42 | S & F MS flat iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 43 | M & L for Flush shutters 30mm thick, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 44 | S & F 35mm second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) complete all as specified an directed. |
| 45 | Supply & Fixing aluminium anodised XPM Jali, 0.45 mm nominal dia with 1.4 mm average width of aperature complete all as specified and directed. |
| 46 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 47 | S & F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 48 | S & F in repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. |
| 49 | S & F stainless steel butt hinges 100mm size complete all as specified and directed. |
| 50 | S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 51 | S & F in repairs 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 52 | S & F 150mm length extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 53 | S & F in repairs 150mm length extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 54 | S & F 200mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 55 | S & F in repairs 200mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 56 | S & F 150mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 57 | S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete all as specified and directed. |
| 58 | S & F aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. |
| 59 | M & L for PCC Block for hold fast and similar work etc (1:2:4) type B-1(using 20mm graded stone aggregate) complete all as specified and directed. |
| 60 | M & L for preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm complete all as specified and directed. |
| 61 | M & L for preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area not exceeding 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed. |
| 62 | M & L for preparation of new wood and wood based surfaes any description, not otherwise described over 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint complete all as specified and directed. |
| 63 | Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 64 | M & L for PCC 20mm thick (1:2:4) type B0, (12.5mm graded aggregate) in sub flooring complete all as specified and directed. |
| 65 | M & L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM (1:4) complete all as specified and directed. |
| 66 | M & L for glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM (1:3) complete all as specified and directed. |
| 67 | M & L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM (1:4) complete all as specified and directed. |
| 68 | S & F in repairs PVC cabinet mirror of size 600 x 450 mm complete all as specfied and directed. |
| 69 | Demolition of cement concrete in ground floor / paving not exceeding 15cm thick below or above GL unreinforced complete all as specified and directed. |
| 70 | M & L for cement concrete (1:3:6) type C-1, (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 71 | S & F in repairs mirror 600 mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plughs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | Dismantling stone slabs or PCC tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete all as specified and directed. |
| 73 | M & L for 18 to 20 mm thick machine cut and machine polished kota stone slab in single piece in jambs and in double piece in cills on vertical surfaces and over 15mm thick cement mortar (1:3) backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing and necessary edge moulding before fixing of kota stone complete all as specified and directed. |
| 74 | M & L for 20-25mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polish, over and including 10mm thick screed bed or bedding layer in CM (1:3) complete all as specified and as directed. |
| 75 | M & L for Marble work other than white or black / Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs, flooring and like over and including provision of 15 mm thick screed bed cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 76 | M & L for 15 -18 mm thick granite stone slab (of any type) machine cut (in one piece) supported with 16mm thick marble stone base, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in cooking platforms WHB counter top, vertical supports including grinding and polishing complete all as specified and directed. |
| 77 | S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent, (10 mm x 5.2 mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5 mm thick complete all as specified and directed. |
| 78 | Supply only sheet glass 5.00 mm thick in glazing with rubber and aluminium beading / packing with rubber gasket complete all as specified and directed. |
| 79 | All as per item no. 78 above but one side frosted complete all as specified and directed. |
| 80 | Supply only aluminium anodised XPM Jali, 24 gauge with 1.4 mm average width of aperature complete all as specified and directed. |
| 81 | S & F in repairs Tubular towel rail / curtain rod 20 mm dia Aluminium anodised complete all as specified and directed. |
| 82 | S & F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed. |
| 83 | S & F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated complete all as specified and directed. |
| 84 | Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed. |
| 85 | All as per item no. 84 above but 20mm bore of pipe complete all as specified and directed. |
| 86 | M & L for tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore diameter complete all as specified and directed. |
| 87 | All as per item no. 86 above but 20mm bore diameter complete all as specified and directed. |
| 88 | S & F in repairs Brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 89 | S & F in repairs hat and coat hooks, solid body of aluminium, 175 mm to 250 mm long complete all as specified and directed. |
| 90 | S & F in repairs Wash basin, Vitreous China white (Flat back) 630 x 450 mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc. complete all as specified and directed.Note: Suppy of pillar tap and waste pipe shall be measured separately. |
| 91 | Supply only pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-507KN or equivalent make as approved by GE. |
| 92 | S & F in repairs pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-507KN or equivalent make as approved by GE. |
| 93 | S & F in repairs stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-514EKN or equivalent make as approved by GE. |
| 94 | All as per item no. 93 above but angle cock chromium plated 15mm bore dia complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-526NKN or equivalent make as approved by GE. |
| 95 | S & F in repair health faucet (Handwash for EWC) first quality including CP bracket to hold the faucet with CP pipe of suitable length in wall complete all as specified and directed. Make-Jaguar cat No-ALE-CHR-583 or equivalent make as approved by GE. |
| 96 | S & F in repairs glass assembly sheet glass consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracked guard and railing 60 cm long complete all as specified and directed. |
| 97 | S & F in repairs bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle, screwed down, screwed for iron pipes complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-511KN or equivalent make as approved by GE. |
| 98 | S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wasters , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 99 | S & F in repairs stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed. |
| 100 | S & F in repairs stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 100 mm dia of outlet complete all as specified and directed. |
| 101 | M & L for low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed. |
| 102 | M & L for low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 40 mm dia complete all as specified and directed. |
| 103 | M & L for chipping, removing carefully concrete surface by low impact hammer / bracker without damaging the structure including preparation of old surfaces of reinforcement bars as per manufacturer's instruction and disposal of debris outside MOD land and applying anticorrosive protective coating for steel reinforcement surfaces and applying epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new mortar, by brush application and building up the profile of structural members by using polymer modified mortar (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20 mm thickness including levelling, profiling etc complete all as specified and directed. Make : Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE |
| 104 | Supply, fabricate and fixing with SINTEX Plasto board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18 mm thick heavy density, interior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size pulling drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, Stainless steel baskets, stainless steel rollers, magnets as required etc complete all as specified and directed as under :-(a) Stainless steel Handle fancy type 100 mm size.(b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation.(c) Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation.(d) Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / closing operation.(e) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation.(f) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation(g) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation(h) Stainless steel roller of size 25 mm x 12 mm, 505 mm lenth suitable for baskets.(j) Magnet of suitable size fixed for cabin leafs, drawers(k) Stainless steel vent perforated 1 mm thick of size 150 mm x 100mm Note- The rate includes syntex plasto board and all connecting items mentioned above and The design and pattern should be approved by GE |
| 105 | Cleaning of PVC water tanks at any height (on accessible / inaccessible roofs) by removing all scale, dirt, mud any foreign material and removing and removing accummulated silt, other dirty substance, algae, fungus and other bacterial material from sides / bottom of tank cleaning shall be done by draining / pumping out water / sludges from bottom from wall / floor / roof by high pressure clleaning method with jet set and again cleaning the tank with fresh water. Disinfecting by using UV radiator and approved chemical (Chloriten) after cleaning writing following letter figures on black back ground with white enamel paint of capacity exceeding 300 ltrs but not exceeding 500 ltrs :- (i) Date of cleaning(ii) Next date of cleaning.(iii) Remove of the existing lettering / figures completely. |
| 106 | All as per item no. 105 above but tank of capacity exceeding 501 ltrs but not exceeding 1000 ltrs |
| 107 | All as per item no. 105 above but tank of capacity exceeding 1001 ltrs but not exceeding 1500 ltrs |
| 108 | All as per item no. 105 above but tank of capacity exceeding 1501 ltrs but not exceeding 2000 ltrs |
| 109 | All as per item no. 105 above but tank of capacity exceeding 3001 ltrs but not exceeding 5000 ltrs |
| 110 | S & F in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 20 mm complete all as specified and directed. |
| 111 | S & F in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 25 mm complete all as specified and directed. |
| 112 | S & F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 113 | S & F in repairs 25mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 114 | S & F in repairs stainless steel plate rack fixed on wall etc made out of 1.00 mm thick of over all size 0.75 x 0.75m with shelves and racks complete all as specified and directed. |
| 115 | Dismantling / Demolition of existing roof terracing of cement / brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush / mechanical brush and with water throughly to romove all dust / dirt and loose particles to expose bare concrete roof slab and removal of rubbish / demolished material outside MD land complete all as specified and directed. Note:- Demolition should be done by chiselling. |
| 116 | M & L for brushing neat cement slurry @ 3 Kgs of cement per sqm complete all as specified and directed. |
| 117 | M & L for rendering 15 mm thick in CM (1:3) on fair faces of brick work or concrete surfaces on roof finished even and smooth using liquid water proofing compound as per manufacturers instructions complete all as specified and directed. Note:- Supply only liquid water proofing compound shall be measured & paid separately. |
| 118 | M & L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer's instructions on the roof surface to achieve requisite slope complete all as specified and directed. Note : Supply only water proofing compound shall be measured & paid separately. |
| 119 | Supply only polymer based liquid water proofing compound complete all as specified and directed. |
| 120 | M & L for providing 4 mm thick APP modified memberane over (Accessible) RCC roof with the following specifications :-(a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit / sqm manufactured by the same agency as that of APP with a density of 0.87-0.89 Kg / lit at 25 Degree Centigrade on the prepared dry roof surface.(c) Providing and laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/sqm(ii) Net wooven polyster weight >160 gm/sqm(iii) Softening point of membrane > 150 degree centigrade(iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230 degree centigrade & Transverse > 450/ sqcm(v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 %(vii) Impermeability under water pressure > 3 Kg/sqcmNote :- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. |
| 121 | Supply and fixing silicon water proof snake guard/ door gap filler 3.8 cm minimum gap filling connected with door shutter from the bottom using small spikes and adhesive as per necessary site requirement as directed by Engineer-in-charge complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender