Tender For Repair / Maintenance Of Water Supply Pump Sets And Connected Spare Parts At Vsn Nagpur
Tender Value
17.99 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Water Supply Pump Sets And Connected Spare Parts At Vsn Nagpur
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for dismantling centrifugal pump set from the existing foundation after disconnecting the inlet/out let pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, servicing the pump set including replacement of unserviceable spare parts reassembling and re-fixing to its original position, making mechanical & electrical connections and testing pumping set complete all as specified and directed for the following:-Note: -(i) Spares to be replaced shall be measured and paid separately as supply only (ii) Rewinding/ Lathing shall be measured and paid separately in respective items of BOQ.(iii) In addition to above the rate quoted by contractor deemed to be includes of transportation, lifting of pump set and replacement of worn out minor parts other than the supply only items such as bushes, check nut etc., if any required for proper functioning of pump set.Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 1 HP to 2HP single/three phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 2 | Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 3HP three phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 3 | Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 10HP 3phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 4 | Centrifugal pump set coupled with electric motor of capacity 20 HP 3 phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 5 | Centrifugal pump set coupled with electric motor of capacity 25 HP 3 phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 6 | Centrifugal pump set coupled with electric motor of capacity 50/60 HP 3 phase, 415 Volts 50 HZ.Make: Crompton/ Kirloskar |
| 7 | Material and labour for rewinding the centrifugal pump set motor by providing high quality of class 'B' paper insulation inside the slots, and rewinding with super enamel copper wire of same size and gauge as per existing rapping up with high quality cotton tape and varnishing with super quality oil including drying upto desired temperature and desired time complete including taking old burnt out copper winding, insulation material and cleaning the slots complete all as specified and directed for the following capacity motor:-1 HP to 2HP 3 phase, 415 Volts 50 HZ |
| 8 | 3HP 3 phase, 415 Volts 50 HZ |
| 9 | 10HP 3 phase, 415 Volts 50 HZ |
| 10 | 20 HP 3 Phase, 415 Volts 50 HZ |
| 11 | 25 HP 3 Phase, 415 Volts 50 HZ |
| 12 | 50 HP/60 HP, 3 Phase, 415 Volts 50 HZ |
| 13 | Material and labour for lathe machine work for pump repaired vide item no 1.01 to 1.06 here in before including necessary transportation if any complete all as directed. |
| 14 | Material and labour for lathe machine work for motor repaired vide item no 2.01 to 2.06here in before including necessary transportation if any complete all as directed. |
| 15 | Supply only the following spares parts of centrifugal pump set suitable for replacing under item no 1.00 to 1.05 here in before: -Impeller made of brass for 20 HP pump |
| 16 | Impeller made of brass for 15 HP pump |
| 17 | Impeller made of brass for 50/60 HP pump |
| 18 | Pump shaft made of stainless steel for 10 HP pump |
| 19 | Pump shaft made of stainless steel for 20 HP pump |
| 20 | Pump shaft made of stainless steel for 25 HP pump |
| 21 | Pump shaft made of stainless steel for 50/60 HP pump |
| 22 | Sleeve made of stainless steel for 10 HP pump |
| 23 | Sleeve made of stainless steel for 20 HP pump |
| 24 | Sleeve made of stainless steel for 25 HP pump |
| 25 | Sleeve made of stainless steel for 50/60 HP pump |
| 26 | Bearing made of stainless steel for 1 to 3 HP pump |
| 27 | Bearing made of stainless steel for 10 HP pump |
| 28 | Bearing made of stainless steel for 20 HP pump |
| 29 | Bearing made of stainless steel for 25 HP pump |
| 30 | Bearing made of stainless steel for 50/60 HP pump |
| 31 | Shaft Lock |
| 32 | Gland Cap made of brass for 10 HP pump |
| 33 | Gland Cap made of brass for 20 HP pump |
| 34 | Gland Cap made of brass for 35 HP pump |
| 35 | Gland Cap made of brass for 60 HP pump |
| 36 | Gland Cap/fondation bolts,Nuts made of stainless steel |
| 37 | Coupling assembly with key for 20 HP pump |
| 38 | Coupling assembly with key for 25 HP pump |
| 39 | Coupling assembly with key for 50/60 HP pump |
| 40 | Bakelite electrical 6/3 pole terminal for 20 HP motor |
| 41 | Bakelite electrical 6/3 pole terminal for 25 HP motor |
| 42 | Bakelite electrical 6/3 pole terminal for 60 HP motor |
| 43 | Fan Blade of required size |
| 44 | Material and labour Taking out defective submersible (vertical) pump set of capacity upto 5 HP from borewell/shallow well for repair by lifting borewell pipe of any type and size from 40m to 70m depth well after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T and P, transporting to store for safe custody or work shop for repair and reinstalling back to borewell, lowering after reconnecting electrical and pipe line connection, commissioning and testing on full load compete all as specified and directed.Note :- (i) Repairing of pump set only will be measured and paid separately in respective items of BOQ. |
| 45 | Material and labour for repair of 50 mm bore GI pipe taken out vide item No 6 above by cutting down and removing damaged threaded portion of pipe from both ends and making the deep threads on both ends of the pipe and supply and fix a socket heavy grade screwed and welded at one end complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | Material and labour for repair of 50 mm bore GI pipe taken out vide item No 6 above by cutting down and removing damaged threaded portion of pipe from both ends and making the deep threads on both ends of the pipe and supply and fix a socket heavy grade screwed and welded at one end complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender