Tender For Certain Repair/Maint To Leakage, Seepage, Plumbing, Sanitary Fittings And Other Allied Services In Otm And Md Accn In Aor Of Age Br-I Under Ge(West)Pathankot
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/Maint To Leakage, Seepage, Plumbing, Sanitary Fittings And Other Allied Services In Otm And Md Accn In Aor Of Age Br-I Under Ge(West)Pathankot
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 2 | Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land |
| 3 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) for MH complete all as specified |
| 4 | Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land. |
| 5 | M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement . |
| 6 | M&L for preparation of new plastered surfaces of walls surface and applying minimum 1.5 mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over one coat primer with roller complete all as specified |
| 7 | M&L for Preparation of old plastered or un-plastered surfaces of wall by applying 1.5 mm thick wall care putty on plastered surfaces of wall; Birla/JK white putty smooth finished ,Make Royal of Asian Paint or Nerolac impressions. |
| 8 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed . |
| 9 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying one coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed . |
| 10 | M&L for rendering 5 mm thick on fair faces of concrete surface of ceiling in CM 1 : 3 and finishing even and smooth without using extra cement complete all as specified and directed.. |
| 11 | M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 12 | M&L for preparation of old plastered surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and directed.. |
| 14 | M&L for preparation of NEW plastered walls surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 15 | M&L for preparation of new plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of Cement Base Paint complete all as specified and directed. |
| 16 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 17 | M&L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of Cement Base Paint complete all as specified and directed. |
| 18 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 19 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified. |
| 20 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggragate) as in base of floor compete all as specified. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed. |
| 22 | Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete. |
| 23 | M&L for 15 -18mm thick granite stone slab (of any type) machine cut (in one piece) supported with 16mm thick marble stone base, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in cooking platforms WHB counter top, vertical supports including grinding and polishing complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed. |
| 25 | M&L for coloured (light shade) vitrified ceramic tiles of size 600mm x 600mm x 10mm thick in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. incl 15 mm thick screed bed in cement mortar 1:6 including finishing even and fair complete all as specified. |
| 26 | M&L for coloured (light shade) vitrified ceramic tiles of size 600mm x 600mm x 10mm thick on vertical wall skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 27 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:6 including finishing even and fair complete all as specified. |
| 28 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,vertical wall skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 29 | M&L for Non skid ceramic colored tiles, edge cut 7 to 8mm thick square or rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18mm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified. |
| 30 | M&L for Coloured glazed ceramic tiles of size 350x 450 x 7mm thick,on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces inc rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 31 | M&L for out door paving tiles of technocommercial equivalent of size 300x300x10mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint incl 20 mm thick screed bed in cement mortar 1:4 over including finishing even and fair complete all as specified. |
| 32 | M&L for modern outdoor floor designs tiles of of size 600x600x10mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint incl 20 mm thick screed bed in cement mortar 1:4 over including finishing even and fair complete all as specified. |
| 33 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm but n exc 4 sq. m each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any all as specified and directed by Engr- in - charge |
| 34 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any extra cost of Govt) all as specified and directed by Engr- in - charge |
| 35 | Taking down shutters of any description exc.1 sq.m and n.exc. 2 sq.m Eachcomplete all as specified and directed. |
| 36 | Taking down shutters of any description exc.1 sq.m and n.exc. 2 sq.m Each and refixing in the same opening complete all as specified and directed. |
| 37 | Dismantling of boarding ,any description and in any position complete all as specified and directed |
| 38 | Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf Kitchen cabinet, cupboard, partition & almirahs complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size.(b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (j) Magnet of suitable size fixed for cabin leafs, drawers Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge. |
| 39 | S&F continous (piano) hinges 40 mm, mild steel, bright finish or electro-galvanised complete all as specified and directed. |
| 40 | S&F 150mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 41 | S&F Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. |
| 42 | S&F Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. |
| 43 | S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 44 | S&F 35 mm thick, 2nd class hard wood factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 45 | S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 46 | S&F extruded Powder coated aluminium section as in Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and all directed |
| 47 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified → |
| 48 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, rolling/sliding type, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,aluminium snap beading, screws etc,suitable handle (1 no.),rolling wheal etc complete all as specified |
| 49 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 50 | S&F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed. |
| 51 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as specified and directed. |
| 52 | S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 53 | All as per srl item No.52 but wire gauzed ie.panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.The rate included for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 54 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy all as specified and directed |
| 55 | S&F 150 mm long aluminium bow handles cast type anodised. |
| 56 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section. |
| 57 | S&F butt hinges med weight cold rolled MS, size 100 mm. |
| 58 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed |
| 59 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 60 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel pain complete all as specified. |
| 61 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealedwater tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed |
| 62 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore15mm complete all as specified. - |
| 63 | S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 15mm complete all as specified. |
| 64 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore20 mm complete all as specified. - |
| 65 | S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 20mm complete all as specified. |
| 66 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 25 mm complete all as specified. - |
| 67 | S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 25mm complete all as specified. |
| 68 | Demolition carefully RCC work as in, Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended worketc by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of debris out side the MOD land. complete all as specified and directed. |
| 69 | M&L for reinforced cement concrete 1 : 2 : 4 type B-1 (using 20 mm graded crushed stone aggregate) for Chajja beams, cantilevers etc complete all as specified and directed. |
| 70 | M&L for Use and waste of Formwork to soffits of suspended slabs such as roof slabs,chajja, water tank staging floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)for flat and rough surfaces complete all as specified and directed. |
| 71 | M&L for TMT bars 10mm dia and over cut to length, bent to shape reqd, inculding cranking,bending spirally for hooping for Columns, hooking ends and binding with and incl MS wire(annealed) not less than .90mm dia complete all as specified and directed. |
| 72 | S&F rotational moulded polythylence water storage tanks 1000 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 ltrs including disconnecting the unserviceable existing tanks complete screwed for iron pipe or brass ferrule directed |
| 73 | S&F rotational moulded polythylence water storage tanks 500 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 ltrs including disconnecting the unserviceable existing tanks complete screwed for iron pipe or brass ferrule directed |
| 74 | S&F in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed. |
| 75 | M&L for Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed |
| 76 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 77 | S&F in repair vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding in repairs. Note:- flushing cistern and flush pipe will be measured and paid under supply only rate. |
| 78 | S&F PVC connector 15mm size with PTMT nuts of length 450mm |
| 79 | S&F in repair PVC connector 15mm size with PTMT nuts of length 450mm |
| 80 | M&L for PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed. |
| 81 | M&L for Wash basin, Vitreous China white (Flat back) 630 x 450mm including fixing granit top with ceramic under counter basin pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar tap and waste pipe complete all as specified and directed. |
| 82 | S&F in repair Pillar taps,15 mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and directed. . |
| 83 | S&F in repair 15mm bore dia brass CP mixcher for mixing hot and cold water screwed down for iron pipe and fixed for basin sink bath complete all as specified and directied |
| 84 | S&F self closing taps 15 mm bore for urinal cast copper alloy chro-mium plated screwed for iro pipe and fixed in repair |
| 85 | S&F self closing taps 15 mm bore and 203.2 mm hight for wash basin copper alloy chro-mium plated screwed for iro pipe and fixed in repair |
| 86 | S&F in repair Angular Stop Cock with Wall Flange 15mm bore dia, cast copper alloy fancy type jaqwarKUP-35053PM or equivalent model of other makes mentioned in tender documents |
| 87 | S&F stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed. |
| 88 | S&F in repair 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessaryfixed complete to walls, ceilings or in floors etc. |
| 89 | S&F in repair bib tap brass 15mm bore dia chromium plated long shank fancy type 2-way Bib Cock with Wall Flange screwed for iron pipes complete in repairs complete all as specified and directed.jaqwarFUS-29041 |
| 90 | S&F in repair bib tap ,15 mm, fancy type cromium platted cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed. |
| 91 | S&F in repairs brass chromium plated bathroom wall (wall mounted model) mixture with telephonic shower arrangement with swivel wall hook with and including old Victorian design telephone shower with 12mm dia 1.5m long flexible tube and swivel hook etc. make- Jaguar (Cat No- 7217 & 9537) of catalogue or equivalent complete all as specified and directed. |
| 92 | S&F in repair 25mm dia, fancy type decorative,ss curtain rod in cluding brackets and nobs each road 2 nos complete all as specified and directed. Make- Vista, Marvel, Mac décor, Deck. |
| 93 | S&F in repair, water jet chromium plated for vitreous china pedestal pattern water closet of approved make all as specified and directed. |
| 94 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. ® |
| 95 | S&F in repairs brass chromium plated towel rail 20mm dia, \\"D\\" type, 600mm long between flanges. |
| 96 | S&F in repair stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge. |
| 97 | S&F Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed.. |
| 98 | S&F Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed. |
| 99 | S&F in repair 15 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed |
| 100 | Taking down AC / PVC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store. |
| 101 | M&L for 110 mm dia PVC (SWR) pipe single socketed (ISI marked) fixed fixed to wall with mild steel clamps complete all as specified and directed. |
| 102 | M&L PVC (SWR) 110mm bends any radiusequal complete all as specified and directed. |
| 103 | M&L for 75 mm dia PVC (SWR) pipe single socketed (ISI marked) fixed fixed to wall with mild steel clamps complete all as specified and directed. |
| 104 | M&L for PVC (SWR) 75 mm bends any radiusequal complete all as specified and directed. |
| 105 | M&L for 75 mm ,PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 106 | M&L for 100 mm) PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 107 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engineer in charge. |
| 108 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. |
| 109 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 110 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. etc and similar work confirming to Fe-290 Gde E-165. complete all as specified and directed by engineer in charge. |
| 111 | S&F rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and countersunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B, complete all as specified and directed. |
| 112 | S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 113 | S&F in repair for 15mm bore brass chromium plated Wall Mixer 3-in-1 System with Provision for over head shower with 115 mm long bend pipe ,Connecting Legs Wall Flange (without Hand and Overhead Shower) complete all as specified and directed. |
| 114 | S&F in repair Hand Shower dia 105 mm round shape single flow with air effect (ABS BODY & FACE PLATE CHROME PLATED) with rubit cleaning system including shower flexible tubes 8 mm dia & 1.5 m long with nuts with wall bracket complete all as specified and directed. |
| 115 | S&F in repair for CP over head Shower 190mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system with 190mm Long Flat Shape shower arm chrome plated Casted with Flange complete all as specified. |
| 116 | S&F in repair for Bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed. |
| 117 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed |
| 118 | S&F for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed. |
| 119 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.Note :- PVC frame shall be measured and paid for separately. |
| 120 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 121 | S&F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs with fixing arrangement complete all as specified and directed. |
| 122 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 123 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 124 | Providing and fixing factory made uPVC white colour casement (Openable/ slideable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be miteredcut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. including all Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated and 5mm thick glazing with selected quality glass.complete all as specified and directed. |
| 125 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. including all Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] .complete all as specified and directed. |
| 126 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 127 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 128 | S&F in repair Non-adhesive wallpaper , Digitally printed on superior quality, smooth/ matt/glazed print wallpaper.Weight: more than 150 gsm non-woven paper. Fully FR rated for domestic and commercial applications including adhesive paste,gum and other necessory asscessories pasted by experts Complete all as spd and directed by engr-in-chge |
| 129 | S&F in Repair PVC Luvours Wooden /Plain/Art/Textured including lighting in groovs if required directed by eng in chge Digitally printed on superior quality, smooth/ matt. Fully FR rated for domestic and commercial applications including pasting strips,Jointed Strips and adhesive paste,gum and other necessory asscessories pasted by experts Complete all as spd and directed by engr-in-chge. |
| 130 | S&F in repair Bathroom Mirror of size exc 1 Sqm and not exc 2.00 Sqm wall Mounted Bevelled Edge Fixed With Plug, Spacers, Shape Rectangularcomplete all as specified and directed. |
| 131 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 57,095.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender