Tender For Repair, Maintenance And Polishing Of Various Wooden Furniture At Af Stn Sirsa
Tender Value
25 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maintenance And Polishing Of Various Wooden Furniture At Af Stn Sirsa
BOQ
| Sl. No. | Item Description |
| 1 | BED PLYWOOD TOP (Drg No. FD-246 & FD-247) |
| 2 | M&L in repairs/replacement of plywood top 1980 × 900 mm, 12 mm thick, 7-ply, BWR grade, ISI marked, including removing damaged plywood top and fixing new plywood with steel screws, complete all as specified and directed. |
| 3 | M&L in repairs mild steel L-shaped plate 35 × 5 mm provided below the junction of long rails with head board and foot board legs, made to shape and size and fixed with steel screws, complete all as specified and directed. |
| 4 | M&L for preparing old polished wooden surfaces by scraping/rubbing down, stopping holes with approved wood filler, and applying one coat of best quality French polish on exposed wooden surfaces to restore a smooth, uniform finish, excluding plywood top, complete all as specified and directed. |
| 5 | M&L in repairs/replacement of damaged wooden long rails of Bed Plywood top made out of 1st Class hardwood section size as per existing MES pattern including removing damaged rails, making proper joints, fixing with adhesive, screws, tightening complete all as specified and directed. |
| 6 | M&L in repairs M.S. flat stiffeners of section 40 × 5 mm, cut to required length to support plywood top, including removing damaged stiffeners, fixing in position and painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 7 | M&L in repairs 4 mm thick teak faced plywood for repair of head board to match existing MES pattern, including taking down damaged plywood, fixing with approved adhesive and screws, making good disturbed surfaces, complete all as specified and directed. |
| 8 | M&L in repair 4 mm thick teak faced plywood for repair of foot board to match existing MES pattern, including removing damaged plywood, fixing with approved adhesive and screws, making good disturbed surfaces, complete all as specified and directed. |
| 9 | BOOK CASE (TP ITEM) |
| 10 | S&F 8 mm thick clear float glass of size 780 × 310 mm with edges ground and polished all around, fixed in repairs to book case complete all as specified and directed. |
| 11 | BOOK CASE WOODEN (Drg No. FD-237) |
| 12 | M&L in repairs/replacement of shutter made of 18 mm thick block board faced with 0.8 mm thick decorative laminate, including continuous piano hinge, anodized aluminium knob, removing damaged shutter and fixing new shutter complete all as specified and directed. |
| 13 | M&L in repairs/replacement of side panel made of 18 mm thick block board faced with 0.8 mm thick decorative laminate on exposed face, made to shape and size, including removing damaged side panel and fixing new side panel complete all as specified and directed. |
| 14 | M&L in repairs/replacement of top panel made of 18 mm thick block board faced with 0.8 mm thick decorative laminate on exposed face, made to shape and size, including removing damaged top panel and fixing new top panel complete all as specified and directed. |
| 15 | M&L for preparing exposed old polished and/or new wooden members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to match the existing finish and obtain a smooth, uniform glossy appearance, complete all as specified and directed. |
| 16 | BIN LINEN (Multipurpose) (Drg No. FD/EG/MAP/O9) |
| 17 | M&L in repairs/replacement of shutters made of 18 mm thick pre-laminated particle board including removing damaged shutters and fixing new shutters with hinges, magnetic catches and screws, complete all as specified and directed. |
| 18 | M&L in repairs/replacement of drawers made of 18 mm thick pre-laminated particle board including removing damaged drawers, fixing new drawers, alignment correction and making the drawers operate smoothly, complete all as specified and directed. |
| 19 | M&L in repairs/replacement of adjustable/removable shelves made of 18 mm thick pre-laminated particle board including removing damaged shelves and fixing new shelves complete all as specified and directed. |
| 20 | M&L in repairs/replacement of 12 mm thick plywood back panel including removing damaged plywood and fixing new plywood with screws complete all as specified and directed. |
| 21 | M&L in repairs/replacement of 1st Class hardwood stiffeners of section 25 × 25 mm including removing damaged stiffeners, fixing new stiffeners and tightening complete all as specified and directed. |
| 22 | S&F in repairs complete set of hardware incl butt hinges, magnetic catches, drawer channels, handles, screws and other necessary fixing accessories for one Bin Linen, complete all as specified and directed. |
| 23 | M&L for tightening loose joints, carrying out minor alignment correction and making Bin Linen fully serviceable, without replacement of components covered under Items 4.01 to 4.06, complete all as specified and directed. |
| 24 | CHAIR DINING (Drawing No. FD-279) |
| 25 | M&L for preparing exposed old polished wooden surfaces by scraping and rubbing down with emery paper, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 26 | S&F in repairs nylon buffers (set of 4 Nos.) including fixing with steel screws complete all as specified and directed. |
| 27 | M&L in repairs/replacement of front rails, rear rails and side rails made of 1st Class hardwood section 30 × 65 mm, including removing damaged rails, making proper joints, fixing with adhesive and screws, complete all as specified and directed. |
| 28 | M&L in repairs/replacement of front legs made of 1st Class hardwood section 50 × 30 mm including removing damaged legs, fixing new legs, proper jointing and alignment complete all as specified and directed. |
| 29 | M&L in repairs/replacement of rear legs made of 1st Class hardwood section 50 × 30 mm including removing damaged legs, fixing new legs, proper jointing and alignment complete all as specified and directed. |
| 30 | M&L in repairs/replacement of 1st Class hardwood stiffeners of section 25 × 20 mm below seat including removing damaged stiffeners and fixing new stiffeners with screws complete all as specified and directed. |
| 31 | M&L for tightening loose joints, carrying out minor alignment correction and making Dining Chair fully serviceable, without replacement of components covered under Items 5.02 to 5.06, complete all as specified and directed. |
| 32 | CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R)) |
| 33 | M&L for preparing old polished surfaces by scraping/rubbing down to remove stains, scratches and other surface imperfections, stopping holes with approved wood filler/putty, and applying one coat of best quality French polish to exposed wooden surfaces to restore a smooth, uniform and glossy finish complete all as specified and directed. |
| 34 | M&L in repairs/replacement of front leg made of 1st Class hardwood, made to shape and size including removing damaged front leg, fixing new front leg, making proper joints and alignment, complete all as specified and directed. |
| 35 | M&L in repairs/replacement of rear leg made of 1st Class hardwood, made to shape and size including removing damaged rear leg, fixing new rear leg, making proper joints and alignment, complete all as specified and directed. |
| 36 | S&F in repairs SEAT CUSHION 75mm thick, 32 density, covered with new Tapestory Cloth (not less than Rs. 250.00 per RM) fixed over existing serviceable plywood seat base complete all as specified and directed. |
| 37 | S&F in repairs Back Rest Cushion., 32 density, covered with new Tapestory Cloth (not less than Rs. 250.00 per RM) made to shape and size complete all as specified and directed. |
| 38 | S&F in repairs Nylon Buffers (4 Nos.) including fixing with steel screws complete all as specified and directed. |
| 39 | M&L in repairs/replacement of 12 mm thick BWR plywood seat base including removing damaged plywood and fixing new plywood with screws complete all as specified and directed. |
| 40 | M&L in repairs side rails/front rail/rear rail made out of 1st Class hardwood section 25×65 mm including removing damaged rail and fixing new rail with adhesive and screws complete all as specified and directed. |
| 41 | M&L in repairs Top Rail/Back Rest Rail made out of 1st Class hardwood, made to shape and size including removing damaged member, fixing with adhesive and screws, complete all as specified and directed. |
| 42 | M&L for tightening loose joints, carrying out minor alignment correction and making Dining Chair Cushioned fully serviceable, without replacement of components covered under Items 6.02 to 6.09, complete all as specified and directed. |
| 43 | CHAIR EASY (Drawing No. FD-229) |
| 44 | M&L for preparing Old Polished Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed. |
| 45 | S&F in repairs NYLON BUFFERS (Set of 4 No) and fixing with Steel Screw on Legs complete all as specified and directed. |
| 46 | M&L in repairs wooden side frame mäde out-of 1st Class hardwood of section 70x40mm and 55x25mm including tightening joints, fixing and alignment correction complete all as specified and as directed. |
| 47 | M&L in repairs wooden arms made out of 1st class hardwood of section 65x25 mm including shaping, fixing and polishing complete all as specified and as directed. |
| 48 | M&L in repairs front rails, rear rails and seat support rails made out of 1st class hardwood including fixing with screw complete all as specified and as directed. |
| 49 | M&L in repairs front legs and rear legs made out of 1st Class hardwood section including tightening, fixing and alignment correction complete all as specified and as directed. |
| 50 | M&L for tightening loose joints, carrying out minor alignment correction and making Easy Chair fully serviceable, without replacement of components covered under Items 7.02 to 7.06, complete all as specified and directed. |
| 51 | CHAIR WRITING (Drawing No. FD-280) |
| 52 | M&L for preparing exposed old polished wooden surfaces by scraping/rubbing down to remove stains, scratches and other surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform and glossy finish, complete all as specified and directed. |
| 53 | S&F in repairs nylon buffers (set of 4 Nos.) including fixing with steel screws complete all as specified and directed. |
| 54 | M&L in repairs/replacement of complete seat assembly comprising 1st Class hardwood frame fitted with PVC cane netting (Godrej pattern), made to shape and size, including removing damaged seat assembly and fixing new seat assembly complete all as specified and directed. |
| 55 | M&L in repairs/replacement of arm rest made of 1st Class hardwood section 60 × 25 mm including removing damaged arm rest, shaping, fixing with adhesive and screws, complete all as specified and directed. |
| 56 | M&L in repairs/replacement of front legs made of 1st Class hardwood section 55 × 35 mm including removing damaged front legs, fixing new front legs, making proper joints and alignment, complete all as specified and directed. |
| 57 | M&L in repairs/replacement of rear legs made of 1st Class hardwood section 30 × 55 mm including removing damaged rear legs, fixing new rear legs, making proper joints and alignment, complete all as specified and directed. |
| 58 | M&L in repairs/replacement of 1st Class hardwood stiffeners of section 25 × 20 mm below seat including removing damaged stiffeners and fixing new stiffeners complete all as specified and directed. |
| 59 | M&L for tightening loose joints, carrying out minor alignment correction and making Writing Chair fully serviceable, without replacement of components covered under Items 8.02 to 8.07, complete all as specified and directed. |
| 60 | HAT STAND (Drawing No. FD-362 & FD-233) |
| 61 | M&L in repairs/replacement of top made of teak wood, made to shape and size, including removing damaged top, fixing new top and making proper joints, complete all as specified and directed |
| 62 | S&F in repairs/replacement of aluminium hooks including fixing with screws complete all as specified and directed. |
| 63 | S&F in repairs 5 mm thick looking mirror of size 400 × 250 mm with edges ground and polished all around, including fixing complete all as specified and directed. |
| 64 | PEG TABLE (Drawing No. FD-236 & FD-277) |
| 65 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top with steel screws, complete all as specified and directed. |
| 66 | M&L in repairs/replacement of leg made of 1st Class hardwood, made to shape and size, including removing damaged leg, fixing new leg, making proper joints and alignment, complete all as specified and directed. |
| 67 | M&L in repairs/replacement of long batten made of 1st Class hardwood, made to shape and size, including removing damaged long batten and fixing new long batten, complete all as specified and directed. |
| 68 | M&L in repairs/replacement of short batten made of 1st Class hardwood, made to shape and size, including removing damaged short batten and fixing new short batten, complete all as specified and directed. |
| 69 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 70 | SIDE BOARD (Drawing No. FD-241) |
| 71 | M&L in repairs/replacement of bottom panel made of 18 mm thick block board, made to shape and size, incl removing damaged bottom panel and fixing new bottom panel, complete all as specified and directed. |
| 72 | M&L in repairs/replacement of drawer made of 18 mm thick block board with 6 mm thick plywood bottom, made to shape and size, including removing damaged drawer and fixing new drawer, complete all as specified and directed. |
| 73 | M&L in repairs/replacement of shelf made of 18 mm thick block board laminated on both faces with 6 mm thick teak wood beading to exposed edges, including removing damaged shelf and fixing new shelf, complete all as specified and directed. |
| 74 | S&F in repairs/replacement of steel handle including fixing with steel screws complete all as specified and directed. |
| 75 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 76 | SOFA SET 5/3 SEATER [Drawing No. FD-281 / FD-373] |
| 77 | M&L in repairs/replacement of front leg made of 1st Class hardwood, made to shape and size, including removing damaged front leg, fixing new front leg, making proper joints and alignment, complete all as specified and directed. |
| 78 | M&L in repairs/replacement of rear leg made of 1st Class hardwood, made to shape and size, including removing damaged rear leg, fixing new rear leg, making proper joints and alignment, complete all as specified and directed. |
| 79 | M&L in repairs/replacement of arm made of 1st Class hardwood, made to shape and size, including removing damaged arm, fixing new arm, making proper joints, complete all as specified and directed. |
| 80 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 81 | TABLE BED SIDE (Drawing No. FD-210 & FD-276) |
| 82 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board (Natural Teak shade), made to shape and size, including removing damaged top and fixing new top, complete all as specified and directed. |
| 83 | M&L in repairs/replacement of side panel made of 18 mm thick pre-laminated particle board (Natural Teak shade), made to shape and size, including removing damaged side panel and fixing new side panel, complete all as specified and directed. |
| 84 | M&L in repairs/replacement of back panel made of 6 mm thick commercial plywood, made to shape and size, including removing damaged back panel and fixing new back panel, complete all as specified and directed. |
| 85 | M&L in repairs/replacement of shelf made of 12 mm thick pre-laminated particle board (Teak shade) with 6 mm thick teak wood edging to the front edge, made to shape and size, including removing damaged shelf and fixing new shelf, complete all as specified and directed. |
| 86 | TABLE BED SIDE MAP |
| 87 | S&F in repairs/replacement of mild steel drawer handle (approved pattern), including fixing complete all as specified and directed. |
| 88 | S&F in repairs/replacement of telescopic drawer channel (approved pattern) suitable for drawer, including fixing complete all as specified and directed. |
| 89 | M&L in repairs/replacement of top plank made of 12 mm thick 1st Class hardwood, approximately 450 × 370 mm in size, including removing damaged top plank and fixing new top plank with screws, complete all as specified and directed. |
| 90 | M&L in repairs/replacement of 4 mm thick teak-faced plywood back panel including removing damaged plywood and fixing new plywood with screws, complete all as specified and directed. |
| 91 | M&L in repairs/replacement of 1st Class hardwood legs of requisite size including removing damaged legs, fixing new legs, making proper joints and alignment, complete all as specified and directed. |
| 92 | M&L for preparing exposed old polished wooden surfaces by scraping/rubbing down to remove stains, scratches and other surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform and glossy finish, complete all as specified and directed. |
| 93 | TABLE CENTRE (Drawing No. FD-274) |
| 94 | M&L in repairs/replacement of top of size 900 × 450 mm made of 18 mm thick pre-laminated particle board (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top with steel screws, complete all as specified and directed. |
| 95 | M&L in repairs/replacement of leg made of 1st Class hardwood, made to shape and size, including removing damaged leg, fixing new leg, making proper joints and alignment, complete all as specified and directed. |
| 96 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 97 | TABLE COMPUTER (Drawing No. FD/E6/MAP-03) |
| 98 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board with 4 mm thick beading, made to shape and size, including removing damaged top and fixing new top, complete all as specified and directed. |
| 99 | M&L in repairs/replacement of keyboard tray made of 18 mm thick pre-laminated particle board with 4 mm thick beading, fitted with suitable telescopic drawer channels, made to shape and size, including removing damaged keyboard tray and fixing new keyboard tray complete all as specified and directed. |
| 100 | M&L in repairs/replacement of drawer made of 18 mm thick pre-laminated particle board with 4 mm thick beading, made to shape and size, including removing damaged drawer and fixing new drawer, complete all as specified and directed. |
| 101 | M&L in repairs/replacement of shelf made of 19 mm thick pre-laminated particle board with 4 mm thick beading, made to shape and size, including removing damaged shelf and fixing new shelf, complete all as specified and directed. |
| 102 | S&F in repairs hard rubber shoes (set of 4 Nos.) including fixing with screws complete all as specified and directed. |
| 103 | TABLE DINNING 6/8 PERSONS (Drg No. FD-273) |
| 104 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top with steel screws, complete all as specified and directed. |
| 105 | M&L in repairs/replacement of leg made of 1st Class hardwood, made to shape and size, including removing damaged leg, fixing new leg, making proper joints and alignment, complete all as specified and directed. |
| 106 | M&L in repairs/replacement of long side rail made of 1st Class hardwood, made to shape and size, including removing damaged long side rail, fixing new long side rail, making proper joints and alignment, complete all as specified and directed. |
| 107 | M&L in repairs/replacement of short side rail made of 1st Class hardwood, made to shape and size, including removing damaged short side rail, fixing new short side rail, making proper joints and alignment, complete all as specified and directed. |
| 108 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 109 | TABLE WITH / WITHOUT DRAWER 900x600x760 mm (Drawing No. FD-224 & FD-284) |
| 110 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top with steel screws, complete all as specified and directed. |
| 111 | TABLE DRESSING GENTS (Drawing No. FD-230) |
| 112 | S&F in repairs 5 mm thick looking mirror with edges ground and polished all around, including fixing complete all as specified and directed. |
| 113 | M&L in repairs/replacement of top made of 18 mm thick block board faced with 1 mm thick decorative laminate (Natural Teak shade), made to shape and size, including removing damaged top and fixing new top, complete all as specified and directed. |
| 114 | M&L in repairs/replacement of bottom panel made of 18 mm thick block board, made to shape and size, including removing damaged bottom panel and fixing new bottom panel, complete all as specified and directed. |
| 115 | M&L in repairs/replacement of back panel of box made of 12 mm thick commercial plywood (ISI marked), including key plate, removing damaged panel and fixing new panel, complete all as specified and directed. |
| 116 | M&L in repairs/replacement of side panel made of 12 mm thick commercial plywood (ISI marked), made to shape and size, including removing damaged side panel and fixing new side panel, complete all as specified and directed. |
| 117 | M&L in repairs/replacement of drawer made of 18 mm thick block board with 6 mm thick plywood bottom and drawer front faced with 1 mm thick decorative laminate (Teak shade), including anodized aluminium knob, removing damaged drawer and fixing new drawer, complete all as specified and directed. |
| 118 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 119 | TABLE DRESSING LADIES (Drawing No. FD-251 & FD/E6/MAP-II/07) |
| 120 | S&F in repairs 5 mm thick glass shutter, made to shape and size with edges ground and polished all around, including fixing complete all as specified and directed. |
| 121 | S&F in repairs 5 mm thick looking mirror, made to shape and size with edges ground and polished all around, including fixing complete all as specified and directed. |
| 122 | M&L in repairs/replacement of top made of 18 mm thick block board faced with 1 mm thick decorative laminate (Natural Teak shade), made to shape and size, including removing damaged top and fixing new top, complete all as specified and directed. |
| 123 | M&L in repairs/replacement of bottom panel made of 18 mm thick block board, including removing damaged bottom panel and fixing new bottom panel, complete all as specified and directed. |
| 124 | M&L in repairs/replacement of back panel of box made of 12 mm thick commercial plywood (ISI marked), including key plate, removing damaged panel and fixing new panel, complete all as specified and directed. |
| 125 | M&L in repairs/replacement of mirror frame made of 1st Class hardwood, made to shape and size, including removing damaged frame, making proper joints and fixing new frame, complete all as specified and directed. |
| 126 | M&L in repairs/replacement of legs made of 1st Class hardwood, made to shape and size, including removing damaged legs, fixing new legs, making proper joints and alignment, complete all as specified and directed. |
| 127 | M&L in repairs/replacement of drawer made of 18 mm thick block board with 6 mm thick plywood bottom and drawer front faced with 1 mm thick decorative laminate (Teak shade), including anodized aluminium knob, removing damaged drawer and fixing new drawer, complete all as specified and directed. |
| 128 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 129 | TABLE WRITING (Drawing No. FD-249 & FD-275) |
| 130 | M&L in repairs/replacement of leg made of 1st Class hardwood, made to shape and size, including removing damaged leg, fixing new leg, making proper joints and alignment, complete all as specified and directed. |
| 131 | M&L in repairs/replacement of top made of 18 mm thick block board faced with 1 mm thick decorative laminate (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top with steel screws, complete all as specified and directed. |
| 132 | M&L in repairs/replacement of drawer made of 18 mm thick pre-laminated particle board (Teak shade) with 6 mm thick plywood bottom, made to shape and size, including removing damaged drawer and fixing new drawer, complete all as specified and directed. |
| 133 | S&F in repairs/replacement of anodized aluminium knob including fixing with steel screw complete all as specified and directed. |
| 134 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. |
| 135 | M&L in repairs/replacement of cupboard with shutter made of 18 mm thick block board faced with 1 mm thick decorative laminate and 6 mm thick teak-faced plywood back, made to shape and size, including removing damaged cupboard assembly and fixing new cupboard assembly, complete all as specified and directed. |
| 136 | TEAPOY (Drawing No. FD-232 & FD-278) |
| 137 | M&L in repairs/replacement of top made of 18 mm thick pre-laminated particle board (Natural Teak shade) with 6 mm thick teak wood edging all around, made to shape and size, including removing damaged top and fixing new top, complete all as specified and directed. |
| 138 | M&L in repairs/replacement of leg made of 1st Class hardwood, made to shape and size, including removing damaged leg, fixing new leg, making proper joints and alignment, complete all as specified and directed. |
| 139 | M&L in repairs/replacement of long batten made of 1st Class hardwood, made to shape and size, including removing damaged long batten and fixing new long batten, complete all as specified and directed. |
| 140 | M&L in repairs/replacement of short batten made of 1st Class hardwood, made to shape and size, including removing damaged short batten and fixing new short batten, complete all as specified and directed. |
| 141 | M&L for preparing exposed old polished and/or new hardwood members by scraping/rubbing down to remove stains and surface imperfections, stopping holes with approved wood filler/putty and applying one coat of best quality French polish to restore a smooth, uniform glossy finish, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender