Tender For Addn/Altn And Improvement To Certain Offices At Sub-Guard Room And Connected Works At Hqtc.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
0 days left
EMD
58250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn And Improvement To Certain Offices At Sub-Guard Room And Connected Works At Hqtc.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : ADDN/ALTN AND IMPROVEMENT TO CERTAIN OFFICES AT SUB-GUARD ROOM AND CONNECTED WORKS AT HQTC. CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down of chowkats or steel frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified & directed |
| 3 | Taking down of chowkats or steel frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified & directed |
| 4 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
| 5 | S&F Factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, Frame (108mm x 48mm), sliding sash (38mm x 61mm). Sliding mesh Sash (38mm x 61mm) Sliding interlock (One vertical length in each shutters) (45mm x 34mm), Glazing bead (19mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick glazing with selected quality glass and as required accessories complete all as specified & directedNotes: The unit rate quoted by contractor shall include cost of glass,mesh and includes all other connected accessories. Net Opening shall be measured for payment purposeUPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account made.The rate quoted shall be including of necessary scaffolding & safety measurers to be followed as per direction by Engr - in- Charge. |
| 6 | S&F factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed. Note:Glass shall be measured and paid separately. For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment shall be made on this account. |
| 7 | S&F 2nd class HW plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 8 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructionscomplete all as specified and directed. Note: WPC shall be measured & paid separately. |
| 10 | M&L for Plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) for filling of hold fast space etc complete all as specified & directed |
| 11 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thick wall putty to prepare the surface even and smooth complete all as specified & directed. |
| 12 | Aluminum Composite Panel (ACP)Non-Combustible- FR B1 Grade ACPProviding and fixing at all levels aluminum composite panels for external / internal wall cladding with all necessary aluminum member frame works at all heights and elevation, as per specification drawings and instructions of the engineer -in -charge. The Total thickness of ACP should be 4mm with 0.5mm thick aluminum skin both side & should consist of 3mm fire retardant Mineral Filled core should comprise of upto 70% Inorganic Compound which is 100% non-combustible mineral and balance 30% is LDPE+HDPE. B1 FR grade ACP core should be conforming to EN13501-1, ASTM NFPA 285, ASTM E -119, Aluminum Alloy of 1100/3003 series, the weight of the panel should be 7.0 kgs/m2, the surface shall be finished with PVDF based coating of minimum 30 ($5 micron on the topsides and services coating on the reverse side shall be with polymer paint coating shall conform to ECCA or AAMA, supplied by Beckers or PPG, the weather sealant shall be Alstone NB-6000/ DOW Corning 991 or equivalent.Make - REYNOARCH/ALUCOBOND/REYNOBOND/ALCOPLA/ALPOLIC |
| 13 | Providing and fixing of Aluminum structural framework, including vertical and horizontal members (50x25x1.1mm) tubes or as per structural design) to support ACP panels, including self-thread screw/Stick Glazing, fasteners, and necessary weatherproof sealant complete all as specified & directed. |
| 14 | ACP LOUVERSProviding and fixing at all levels Aluminum Composite Panels Louvers for external/internal wall cladding with all necessary aluminum member frame works at all heights and elevation, fastening material, equipment handing transportation, workmanship, preparation of working drawings, staging scaffolding etc., all complete, as per specification drawings and instructions of the engineer -in- charge. The aluminum composite Louvers panel shall be of 30mm thick in 610x2440mm, made with 3mm ACP in perfect corrugation of 30x30mm with a gap of 30mm, the whole corrugation is fixed on 3mm flat ACP sheet for easy fixing & dimensional harmony. The surface shall be finished with PVDF based coating and services coating on the reverse side shall be with polymer paint coating. The Top surface shall be protected with self-adhesive peel of masking foil the system shall be designed to with stand a wind pressure of 200kg/sqm and shall be fixed to the Masonry/RC walls with necessary clamps brackets and anchorfasteners. Al clamps and brackets shall be hot dip galvanized minimum 80 microns thick and shall conform to IS 4759-1996 the extruded aluminum section shall be anodized in approved color with an anodic coating of minimum 20 microns.Extruded section shall be 6063 T5 or T6 alloy conforming to ASTM B221 Any other fastening straps nuts bolts rivets washers etc. shall be in stainless steel SS 304 grade. Rate quoted shall include for providing EPDM gaskets open cell polyethylene backer rods & weather sealant etc. Make - REYNOARCH/ALUCOBOND/REYNOBOND/ALCOPLA/ALPOLIC |
| 15 | Complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means wuth two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified & directed. |
| 16 | M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 17 | M&L for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified & directed. |
| 18 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed. |
| 19 | S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed. |
| 20 | S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified & directed. |
| 21 | S&F in repairs fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed. |
| 22 | S&F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed. |
| 23 | S&F in repair Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed. |
| 24 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc, finishing cement concrete surface even and smooth without using extra cement complete all as specified & directed. |
| 25 | M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors with 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed. |
| 26 | M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 27 | M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match over 40 mm thick sand cushioning complete all as specified & directed. |
| 28 | M&L for Sand cushioning including watering for Interlocking tiles( 40 mm thick) /protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and as directed.Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose for sand layered for cable protection purpose. ( Item 27 of Job A (B&R) + Item 4 of Job A (E&M External E/S)=6.2+10.94=17.14) |
| 29 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 400mm x 400 mm of size, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified & directed. |
| 30 | M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 31 | M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete all as specified & directed. |
| 32 | Excavating in post holes (or similar holes) each not exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified & directed. |
| 33 | S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified & directed. |
| 34 | S&F Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and not exc 15cm long complete all as specified & directed. |
| 35 | S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall including crimping , fixed with self tapping screws/J hooks and bolts as reqd complete all as specified & directed. |
| 36 | M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls surface /ceilings /floors etc modular MS sunken boxes with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed for the following :- |
| 37 | One light point controlled by one single pole 5 Amps switch. |
| 38 | One ceiling /wall fan point controlled by one single pole 5 Amps switch. |
| 39 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 40 | One 5 pin socket point 5 Amps on independent board. |
| 41 | One 5 pin socket point 5 Amps on same board with other switches. |
| 42 | M&L for concealed point wiring with 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls surface/ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15Amp switch socket combination on independent board complete all as specified & directed. |
| 43 | M&L for concealed sub main wiring with two single core 1.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note-Two runs of single core 1.5 sqmm cable and one run of 1.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. |
| 44 | M&L for concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. |
| 45 | M&L for concealed sub main wiring with two single core 4.0 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4.0 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Notes- Two runs of single core 4.0 sqmm cable and one run of 4.0 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. |
| 46 | S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified & directed. |
| 47 | S&F Modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified & directed. |
| 48 | S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified & directed. |
| 49 | S&F Modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified & directed. |
| 50 | S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed. |
| 51 | S&F Modular white cover plate with frame, 2 module complete all as specified & directed. |
| 52 | S&F Modular white cover plate with frame, 3 module complete all as specified & directed. |
| 53 | S&F Modular white cover plate with frame, 4 module complete all as specified & directed. |
| 54 | S&F Modular white cover plate with frame, 6 module complete all as specified & directed. |
| 55 | S&F Modular white cover plate with frame, 8 module complete all as specified & directed. |
| 56 | S&F Modular metal flush box 1/2 module complete all as specified & directed. |
| 57 | S&F Modular metal flush box 3 module complete all as specified & directed. |
| 58 | S&F Modular metal flush box 4 module complete all as specified & directed. |
| 59 | S&F Modular metal flush box 6 module complete all as specified & directed. |
| 60 | S&F Modular metal flush box 8 module complete all as specified & directed. |
| 61 | S&F LED lights fitting 4 feet 20 watt , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 62 | S&F LED light fitting round shape 15 watt warm white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed. |
| 63 | S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 64 | S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed. |
| 65 | S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed by Engr-in-Charge. |
| 66 | S&F Wall Mounted fan AC single phase 230 V of size 450 mm sweep complete all as specified & directed. |
| 67 | S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers complete all as specified & directed. |
| 68 | S&F of Sheet metal enclosure for DB's double door VTPN 08 ways including MCCB 125 Amp 4 pole, with breaking capacity 25 KA, to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed. |
| 69 | S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed. |
| 70 | S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed. |
| 71 | S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed. |
| 72 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galvanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, funnel and wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-3 of SSR part No1 complete all as specified & directed . ( Item32 of Job A (E&M, Internal) + Item 17 of Job A (E&M External E/S)=2+2=4)Note- The unit rate includes main earthing lead galvanised iron steel wire 4mm dia with 15 mm dia GI light grade earth lead protection pipe from earth electrode to test point up to 7.5 mtr. |
| 73 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed. ( Item33 of Job A (E&M, Internal) + Item 18 of Job A (E&M External E/S)=20+20=40) |
| 74 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 75 | Returning,filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed. |
| 76 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 77 | Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed. |
| 78 | S&F LED flood light fitting 30 watts,240 Volt, single phase, AC, outdoor type,aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver,motherboard and LED complete all as specified & directed. Make: Bajaj BJFL 30W LED or Techno-commercially equivalent in Havells/Philips/Wipro. |
| 79 | S&F LED flood light fitting 50 watts,240 Volt, single phase, AC, outdoor type,aluminium pressure die-cast housing with IP66 protection with 4 Kv in-built surge protection complete with driver,motherboard and LED complete all as specified & directed. Make: Bajaj BJFL 50W LED or Techno-commercially equivalent in Havells/Philips/Wipro. |
| 80 | S&F LED flood light fitting 100 watts,240 Volt, single phase, AC, outdoor type, with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver,motherboard complete all as specified & directed. Make:Bajaj PRAZE F 120L WH NB-A5 TG SD or Techno-commercially equivalent in Havells/Philips/Wipro. |
| 81 | M&L for sub main wiring from street light fitting to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed.Note : One run of earth continuity conductor,one run of PVC conduit and two runs of copper conductor together taken as one length for measuring unit length. |
| 82 | Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing on pole PVC cable loop box, size not less than 145 mm x 145 mm x 95 mm, out door type, IP 65 including porcelain insulated connectors for incoming and outgoing 4 core cables with one MCB SP 6 amps 230 volts connected to street light fitting sub main wire and using FI clamps of size 20 mm x3 mm for fixing of PVC cable loop box with pole,including nuts,bolts & washers and connecting the cables to connectors with using suitable size GI nut, bolts and washers and aluminum lugs etc and complete all as specified & directed. |
| 83 | S&F LED street light fitting 90 watts,240 Volt, single phase, AC, outdoor type with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver,motherboard and LED complete all as specified & directed. Make: Bajaj ZELA P 120 L WH PO TG SD or Techno-commercially equivalent in Havells/Philips/Wipro. |
| 84 | Disconnecting and taking out old rusted/ unserviceable light fitting’s bracket incl FI clamps of any description and in any position and S&F brackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified and directed. |
| 85 | S&F GI pipe light grade of 50 mm dia for cable protection on pole/ wall/ floor/ or in trenches and drain (for street light from bottom of pole upto junction box) etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed. |
| 86 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 2 core and connecting up incoming/out going cables connection with suitable size lugs and testing complete all as specified and directed. |
| 87 | All as per item No-85.00 here-in-before but of size 50 sqmm 3.5core. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender