Tender For Repair/ Maintenance Of Main Pipe Lines, Sluice Valves And Gate Valves At Comd Hospital (Wc) Under Age E/M (Ch) Of Ge (U) Chm.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Main Pipe Lines, Sluice Valves And Gate Valves At Comd Hospital (Wc) Under Age E/M (Ch) Of Ge (U) Chm.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in hard/dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in trenches and getting out including leveling of bottom surface and trimming of sides complete all as specified and directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed. |
| 3 | Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed. |
| 4 | Taking up 200 mm bore CI/DI pipes from trenches including fittings and removing from site of work complete all as specified and as directed.Note (Item No 04 to 10):- (i) Excavation and earth work shall be measured and paid for separately. |
| 5 | Taking up 150 mm bore CI/DI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 6 | Taking up 100 mm bore CI/DI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 7 | Taking up 100 mm bore GI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 8 | Taking up 50 mm bore GI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 9 | Taking up 40 mm bore GI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 10 | Taking up 25 mm bore GI pipes from trenches including fittings and removing from site of work complete all as specified and as directed. |
| 11 | Taking up 100 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed.Note (Item No 11 to 16):- (i) Excavation and earth work shall be measured and paid for separately. |
| 12 | Taking up 50 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed. |
| 13 | Taking up 40 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed. |
| 14 | Taking up 25 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed. |
| 15 | Taking up 20 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed. |
| 16 | Taking up 15 mm bore GI pipes from walls etc including fittings and removing from site of work complete all as specified and as directed. |
| 17 | Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 200 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.Notes (Item No 17 to 19):-(i) Rubber ring joints shall be measured and paid for separately. (ii) Excavation and earth work, if required, shall be measured and paid for separately. (iii) Cutting of existing CI/DI/GI pipes for making connection shall be measured and paid for separately. |
| 18 | Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 150 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed. |
| 19 | Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 100 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed. |
| 20 | Supplying, laying, jointing, testing & commissioning of 100mm bor steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed.Note (Item No 20 to 23):- Excavation and earth work shall be measured and paid for separately. |
| 21 | Supplying, laying, jointing, testing & commissioning of 50mm bore steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed. |
| 22 | Supplying, laying, jointing, testing & commissioning of 40mm bore steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed. |
| 23 | Supplying, laying, jointing, testing & commissioning of 25mm bore steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 24 | Supplying, laying, jointing, testing & commissioning of 25mm bore steel water tubing, medium grade, galvanised with all fittings, like tees, nipples, unions etc laid in trenches, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender