Tender For Periodical Services To Bldgs At Varunapuri-I,Ii & Iii, Map Area, Dad, Ram Mandir , Dcra Area & Uwr Of Ge (Nw) Vasco
Tender Value
80 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
26 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Bldgs At Varunapuri-I,Ii & Iii, Map Area, Dad, Ram Mandir , Dcra Area & Uwr Of Ge (Nw) Vasco
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for brooming down or steel wire brushing scrapping down, smoke , moulds, moss and efflorescent salts , trading oil etc from old surfaces of wall plastered or unplastered including cornices and pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 2 | Material and labour for preparation of old surface and applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 3 | Material and labour for preparation of old surface and applying one coats of white wash on ceiling complete all as specified and directed. |
| 4 | Material and labour for preparation of old surface and applying one coat of colour wash on old walls complete all as specified and directed. |
| 5 | Material and labour for preparation of old surface and apply one coat of cement base paint on old walls complete all as specified and directed. |
| 6 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed. |
| 7 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint with anti corrosion complete all as specified and directed. |
| 8 | Material and labour for preparation of old painted surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 9 | Material and labour for writing letters/ bldg Nos on walls 7.5 cm high using synthetic enamel paint white over circular/rectangular shaped black painted back ground ( 20 to 30 cm dia/long) complete all as specified and directed. |
| 10 | Taking down cement plaster of any description on brick or stone walls including racking out joint hacking for key, scrubbing down with water etc. |
| 11 | Material and labour for Rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement. |
| 12 | Material and labour for Rendering 10 mm thick on wall in cement mortar 1:6 on brick/stone masonary,concrete surfaces finished even and smooth without using extra cement. |
| 13 | Material and labour for Rendering 15mm thick plaster on walls in cement mortar 1:4 in two coats (10 mm thick backing coat + 5mm thick finishing coat) finished even and smooth without using extra cement including water proofing compound (Dr. fixit LW or equivalent 200ML per bag of cement) etc complete all as specified and directed. |
| 14 | Material and labour for 3mm thick wall care putty on internal wall complete all as specified and directed. |
| 15 | Material and labour for Preparing newly plastered surface of ceiling and applying two coats of oil bond distemper over a coat of alkali resistant primer. |
| 16 | Material and labour for Preparing newly plastered surfaces of wall and applying two coats of OBD over a coat of alkali resistant primer |
| 17 | Supply only Liquid water proofing compound all as specified. |
| 18 | Material and labour for Preparation of old treated surface of wall by scrapping / rubbing, applying one coats of Advanced Anti-algal Weather Proof 100% Acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane. complete as per Manufacturers specifications |
| 19 | Material and labour for removing peepul trees or any type of trees/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc, and applying acid or suitable chemical to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 all as directed by Engineer-in-Charge. (Safety precautions like rope, safety belts, helmets, ladder etc will be the responsibility of contractor) |
| 20 | Material and labour for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint including 3mm thick wall care putty complete all as specified and as directed . |
| 21 | Complete removal of existing treatment of plastered surface of external wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 22 | Material and labour for preparation of newly plastered surface and applying two coat of raincoat. Prime the surface with a coat of water-based primer composed of acrylic emulsion polymer of approved make diluted with potable water in ration 2:1 by volume prior to application of raincoat and allow it to dry for 2 to 3 hrs. Apply first coat of raincoat. Apply second coat of raincoat with an interval of 5 to 6 hrs and allow to cure for 7 days all as directed and as per manufactures instruction. (Note:- Priming coat and raincoat used shall be same Make/Manufactures) |
| 23 | Material and labour for bond coat on the prepared surface to receive new polymer mortar/ polymer modified concrete, with two components epoxy based bonding coat in one full coat. Laying of reinforcement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This coat act as bonding agent between old and new concrete and also acts as 'barrier coat\\" to the migration of chloride ions from host concrete. Item rate is inclusive of the materials all labour, scaffolding, supervision, tools and tackles and transportation etc complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for single component, dual shrinkage cmpensated,ready mixed high strength thyrotrophic repair mortar(up to 50mm) as per specification for covering the damaged structural member and reinforcement in desired layer and thickness including scaffolding ,curing inclusive of all labour,materials,equipment,scaffolding,etc complete as per specification and instruction of Engineer in charge. Item rate is inclusive of materials all labour ,tools and tackles,scafflolding and transportation etc.complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc, by skilled labour complete all as directed. |
| 26 | Material and labour for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) up to 15mm in a single coat @ 34 kg per sqm for 15mm thickness as per manufacturer instructions complete all as directed. |
| 27 | Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- |
| 28 | Material and labour for one coat of acrylic water based interior grade primer @ 0.8 Ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent coats. |
| 29 | Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface including scaffolding arrangement, trestles, ladders etc and cleaning of splashes from furniture and floors, doors/windows up to two or three stories building complete all as specified and directed. |
| 30 | Material and labour for preparation of old surface (Plastered or unplastered) of walls and applying One coat of oil bound distemper including filling the holes, depression area with wall acre putty using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage complete all as specified and directed. |
| 31 | Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per Ltr complying LEEDS criteria @1 Ltrs(undiluted) /10 sq Mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed. |
| 32 | Material and labour for preparation of new plastered surfaces of walls/ceiling and chajja and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in |
| 33 | Material and labour for preparation of old surface (Plastered or unplastered) of walls and apply water proof cement based putty in holes and depression area over the plastered/old painted wall and applying One coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ |
| 34 | Material and labour for one coat of acrylic water based exterior grade primer @0.9 Ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 35 | Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per Material and labour for preparation of old painted wooden base surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer complete all as specified and directed by Engr-In-Change Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender