Tender For Repair / Maintenance Including Denting Painting, Polishing And Re-Canning Of Various Steel Furniture At Af Stn Under Ge (Af) Jamnagar No.2
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Including Denting Painting, Polishing And Re-Canning Of Various Steel Furniture At Af Stn Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Removing old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ”and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032) |
| 2 | MS lock 6 levers best quality with brass livers & duplicate key (Make:- Harrison/Samrat or equivalent as approved by the GE) |
| 3 | Mild steel chromium plated handle 125 mm size . Make : link/MK/Man |
| 4 | Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing. |
| 5 | Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine. |
| 6 | M & L for Removing old unserviceable Shelves from Almirah Large/Med/Small Steel and S & F shelves of approved quality of existing size fixed with screw/welding to shutter of almirah all as specified and directed by Engr-in-charge. As shown in drg |
| 7 | M & L for Removing the existing dented shelves from Almirah Large/Med/Small Steel and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-charge. all as shown in drg. |
| 8 | M & L for Removing old unserviceable Hanging rod from Almirah Large/Med/Small Steel and supply and fix new hanging rod of approved quality all as specified and directed by Engr-in-charge. all as shown in drg |
| 9 | M & L for Removing old unserviceable door shutter from Almirah large steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in Charge all as shown in drg. |
| 10 | M & L for Removing old unserviceable door shutter from Almirah Smal/lMed steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in Charge all as shown in drg. |
| 11 | Removing the existing U/S plywood from BED IP STEEL HARDTOP & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R) |
| 12 | Removing the existing U/S pre-laminted partical board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP/08 (R)) |
| 13 | Removing the existing U/S pre-laminted partical board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R)) |
| 14 | Removing old unserviceable long rails and S&F new long rails of Bed Hard size 1974x65x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 15 | Removing old unserviceable stiffners and S&F new stiffner rails of Bed Hard size 850x25x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 16 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 17 | Removing following old and unserviceable parts / components of “TEAPOY VARANDAH” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-255) |
| 18 | Removing old u/s tops from teapoy verandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 19 | Leg fabricated with 20 mm dia mild steel conduit pipe of wall thickness 1.6 mm including bending in 'U' shape. |
| 20 | Removing of existing unsv rubber shoe and S & F with new rubber shoe as shown in drg. |
| 21 | Top frame Long Rail as shown in drg |
| 22 | Top frame short Rail as shown in drg |
| 23 | Removing following old and unserviceable parts / components of “TABLE 3X3 (900 x 900) STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1009) |
| 24 | Removing old u/s tops from Table 3X3 steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 25 | Leg fabricated with 25 mm size steel square tube with 1.6 mm wall thickness. |
| 26 | Taking down and S&F new rubber shoes to the legs of the table complete all as specified. |
| 27 | Removing old and unserviceable parts/components of CHARPOY IP STEEL HARD TOP\\"and S&F in replacement plywood BWR grade ISI marked 12mm thick to the top of the charpoy with suitable nuts,bolts & washers complete all as specified in drawing and directed by Engr-in-charge. Drg No.(FD/MAP-II/01) |
| 28 | Removing old unserviceable long rails and S&F new long rails of Charpoy Ip hard size 1974x65x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 29 | Removing old unserviceable stiffners and S&F new stiffner rails of Charpoy Ip Hard size 850x25x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 30 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 31 | M&L for re-canning of \\"CHAIR VERANDAH\\" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256) |
| 32 | Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel. |
| 33 | Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004) |
| 34 | Removing old u/s tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 35 | Removing of unserviceable/broken/Damaged/Rusted drawers from existing table office clk steel for repair drawers include tinkering/denting, welding etc. |
| 36 | M&L for removal of existing unserviceable lock of any description in any position, S& F new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge. |
| 37 | Removing of Existing unserviceable handle and S & F with new handle as shown in drg. |
| 38 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 39 | Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003) |
| 40 | All as per item No 7.01 above but top of Table Office Offr steel |
| 41 | All as per item No 7.02 above but drawers of Table Office Offr steel |
| 42 | All as per item No 7.03 above but lock of Table Office Offr steel |
| 43 | All as per item No 7.04 above but handle of Table Office Offr steel |
| 44 | All as per item No 7.05 above but Rubber shoe of Table Office Offr steel |
| 45 | Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Godrej/Durian/HOF & etc) |
| 46 | Removing the existing old foam with tapestry of seat and S &F new 40 density foam cushion 75 mm with tapestry as approved By GE . |
| 47 | All as per item No 9.01 above but Back of chair revolving. |
| 48 | All as per item No 9.01 above but Arm of chair revolving. |
| 49 | Removing the existing U/S casteor wheel and S&F new caster wheel. |
| 50 | Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc. |
| 51 | Replacement of complete plate base stand assembly including all necessary fitting etc. |
| 52 | Replacement of Chair Base with 5 wheel as per drg |
| 53 | Replacement of Tapestry cloth of seat as per drg |
| 54 | Replacement of Tapestry cloth of back as per drg |
| 55 | Removing following old and unserviceable parts / components of “CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material, with screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -FD/E6/MAP/12 & TP ) |
| 56 | Removing the existing old foam & tapestry of seat and S &F new 50 density foam cushion 50 mm with tapestry as approved By GE . |
| 57 | All as per item No 10.01 above but Back of chair writing. |
| 58 | Replacement of Hand rest as per drg |
| 59 | Removing the existing rubber stopper and S&F new rubber stopper. |
| 60 | Replacement of Tapestry cloth of seat as per drg |
| 61 | Replacement of Tapestry cloth of back as per drg |
| 62 | Removing following old and unserviceable parts / components of “LOCKER BED SIDE STEEL” and S&F new parts / components of same size, existing pattern with welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1029) |
| 63 | M&L for removal of existing unserviceable handle, S&F new chromium plated handle 100mm long including fixing with suitable nut/pins as specified and directed by Eng-in-charge. |
| 64 | M&L for continous gas welding at damaged portions/joints all as specified and directed by Eng-in-charge(each joint to be measured separately) |
| 65 | M&L for removal of existing unserviceable Leg S&F new Leg as specified and directed by Eng-in-charge. |
| 66 | M&L for removal of existing unserviceable door S&F new door as specified and directed by Eng-in-charge. |
| 67 | M&L for removal of existing unserviceable Hasp & Staple S&F new Hasp and staple as specified and directed by Eng-in-charge. |
| 68 | Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/15 (R) ) |
| 69 | Back of 6 mm thick commercial face plywood. |
| 70 | side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) PVC edging fixed to frame 25mm projection on all three sides all as specified in drg as directed by Engr-in-charge. |
| 71 | Removing of existing unserviceable top and S & F with new top 18mm thick prelaminated particle board exterior grade (ISI Marked)(both side laminated) as shown in drg. |
| 72 | Removing of existing unserviceable upper drawer and S & F with new upper draweras shown in drg. |
| 73 | Removing of existing unserviceable lower drawer and S & F with new lower drawers shown in drg. |
| 74 | Removing of Existing unserviceable handle and S & F with new handle as shown in drg. |
| 75 | Removing of existing unsv rubber shoe and S & F with new rubber shoe as shown in drg. |
| 76 | Removing of Existing unserviceable front leg and S & F with new front leg as shown in drg. |
| 77 | Removing of Existing unserviceable Rear leg and S & F with new Rear leg as shown in drg. |
| 78 | Removing following old and unserviceable parts / components of “RACK SHOE STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/ 02/R) |
| 79 | Creedal (selves) made of 25 mm conduit pipe & 3 mm MS wire mesh |
| 80 | Removing following old and unserviceable parts / components of “TABLE COMPUTER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03) |
| 81 | Removing old u/s tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 82 | Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge. |
| 83 | Removing old u/s vertical of Table computer and S&F (650 x150) with 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 84 | Removing U/S telescopic channel and S & F new telescopic channels for mouse and keyboard trayas per drg all as specified in drg as directed by Engr-in-charge |
| 85 | Removing U/S Pull out tray inculding telescopic channel and S & F new pull out tray with telescopic channels as per drg all as specified in drg as directed by Engr-in-charge |
| 86 | Removing U/S Key Board tray inculding telescopic channel and S & F new key Board tray with telescopic channels as per drg all as specified in drg as directed by Engr-in-charge |
| 87 | Removing U/S Drawer Handle and S & F new drawer Handle as per drg all as specified in drg as directed by Engr-in-charge |
| 88 | Repairs of BOOK CASE STEEL( FD/69,1018 FD-45/FD/235) |
| 89 | M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth all as specified and as directed by Engr-in-Charge. |
| 90 | M & L for removing old unserviceable locks from book case steel and S & F new 4 layer brass lock of 50mm with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of book case steel all as specified and directed by Engr-in-Charge. |
| 91 | M & L for removing old unserviceable broken CP handles 100mm from Book case steel and supply and fix new Godrej pattern handle with necessary fittings of approved quality all as specified and directed by Engr-in-Charge. |
| 92 | M & L for removing the existing unserviceable legs from book case steel and supply and fixing the new legs made out of 1mm thick CRCA sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint of olive green shade over a coat of redoxide primer all as specified and as directed by Engr-in-Charge. |
| 93 | M & L for removing the existing dented shelves from book case steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and as specified abd directed by Engr-in-Charge. |
| 94 | M & L for removing the unserviceable/rusted bottom from book case steel and supply and fix new bottom nade out of 1mm thiick CRCA sheet made to shade and size on drawing and fixing by welding matching with existing book case and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. |
| 95 | Removing of old unserviceable Glass pane and S & F new front glass of each compartment 3mm thick glass pane to thr front shelves of each compartment of book case steel all as shown on drg and as directed by Engineer-in-Charge. |
| 96 | M&L for spot Welding of steel items of broken joints/legs/square tube etc,thickness of weld 6 mm including scraping preparing surface of welded portion by grinding and buffing including painting to match with existing. |
| 97 | Removing following old and unserviceable parts / components of “CHAIR SCHOOL WITH HAND BOARD” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05) |
| 98 | S & F in repair PVC Seat & back one piece of chair school with hard baord. (Drg No.FD/ E6/ MAP/ 05)Make:- Blowplast / Supreme / Cello / National, Amko) |
| 99 | Removing old u/s tops from chair school hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 100 | Hard rubber shoe. |
| 101 | Removing old and unserviceable parts / components of “ CHAIR TUBULAR OFFICE STEEL WITH / WITHOUT ARMS” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 ) |
| 102 | Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete. |
| 103 | Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.. |
| 104 | Second class HW hand rest including black enamel painting. |
| 105 | Rubber shoe with suitable screws. |
| 106 | Removing following old and unserviceable parts / components of “TABLE 900 x 600 x 760mm with & without drawer” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1007,1008) |
| 107 | Removing old u/s tops from Table TABLE 900 x 600 x 760mm with drawer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 108 | Removing U/S leg/short rail and S&F of new leg/short as per existing drg. |
| 109 | Drawer as per drg |
| 110 | Handle as per drg |
| 111 | Rubber shoe with suitable screws. |
| 112 | M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge. |
| 113 | Almirah med steel (Drg No - FD 243 /1032) |
| 114 | Almirah large steel (Drg No - FD 67/1031) |
| 115 | Book Shelf Open Small Steel (Drg No - FD-69 M) |
| 116 | Chair Writing (Drg No - FD/E6/MAP/12) |
| 117 | Rack 6 tier steel (Drg No - FD-1038) |
| 118 | Rack Shoe Steel (Drg No - FD E6 MAP 02) |
| 119 | Table office officers steel (Drg No - FD 84 M,1003) |
| 120 | Table office clerk steel (Drg No - FD 84 M,1004) |
| 121 | Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008) |
| 122 | Table 900 x 900 x 760 Steel (Drg No - FD-1007,1009) |
| 123 | Teapoy verandah (Drg No - FD 35 / 255 / 383) |
| 124 | Bed hard steel (Drg No - FD / E6 / MAP / 8 (R)) |
| 125 | Charpoy IP with hard top (Drg No - FD / MAP- II /01) |
| 126 | Chair School Hand Board (Drg No FD / E6 / MAP / 05) |
| 127 | Locker Bed Side” (Drg No / FD - 1029) |
| 128 | Chair varandah Steel (FD- 256) |
| 129 | Table bed Side (Map) ( FD/E6/MAP/15®) |
| 130 | Bench Workshop 18000x1200x760mm (FD-1024) |
| 131 | Table computer (Drg No FD-1009,FD/E6/MAP/03) |
| 132 | Chair CB steel with Arms (Drg No FD-75) |
| 133 | Chair varandah MAP (Drg No: FD/E6/MAP/II) |
| 134 | Rack steel of size 1905 x 1830 x 760mm (Drg No FD-129) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender