Tender For Repair And Painting To Boundary Wall, Fencing And Gate At installation Hansa, Raqas,Nasdo, Nts (Goa), And Nay (G), Cavellosim, Ndb, Cortalim, Under Ge(Nw) Vasco.
Tender Value
80 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
26 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting To Boundary Wall, Fencing And Gate At installation Hansa, Raqas,Nasdo, Nts (Goa), And Nay (G), Cavellosim, Ndb, Cortalim, Under Ge(Nw) Vasco.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., including removing rubbing to a distance exceeding 100m complete all as specified and as directed. |
| 2 | Material and labour Rendering 15 mm thick cement plaster on concrete solid block/brick masonry walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 finished to even & smooth w/o using extra cement complete all as specified adn as directed. |
| 3 | Material & Labour for preparation of new plastered or un-plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of Chalk whiting primer complete all as specified and as directed. |
| 4 | Material and labour for preparation of old surface of wall plastered including cornices and pilasters etc and applying one coat of cement base paint on wall all as specified and as directed by Engr-in-Charge. Note:-(i) At some places, concertina coil is fixed at the face of compound wall. Rates quoted by the contractor shall be inclusive the obstacles/ hindrance caused due to concertina coil.(ii) During the painting period the concertina coil fixed at the face of compound wall shall not be dislodge/ dislocate/ disturbed. Any damaged occurs shall be make good as original without any extra cost. (iii) Prior intimation to the Engr-in-Charge shall be given in well advance while painting to avoid security/ safety hazards. |
| 5 | Material and labour for complete removal of old surface of wall plastered including cornices and pilasters etc and applying two coats of cement base paint over riming plastered and other surfaces with alkali resistantpriming paint on wall all as specified and as directed by Engr-in-Charge. Note:-(i) At some places, concertina coil is fixed at the face of compound wall. Rates quoted by the contractor shall be inclusive the obstacles/ hindrance caused due to concertina coil.(ii) During the painting period the concertina coil fixed at the face of compound wall shall not be dislodge/ dislocate/ disturbed. Any damaged occurs shall be make good as original without any extra cost. (iii) Prior intimation to the Engr-in-Charge shall be given in well advance while painting to avoid security/ safety hazards. |
| 6 | M/L for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground all as specified and directed by Engr-in-charge. |
| 7 | Material and labour for preparation of old steel surface and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 8 | Material and labour for preparation of old surfaces walls and applying two coat of acrylic anti-fugal weather proof exterior grade paint of first quality over a coat of primer including sealing the cracks all as specified in manufacturers instruction all as specified and as directed. |
| 9 | Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 10 | Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonry with solid blocks built in cement mortar 1:6 all specified and directed. |
| 11 | Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for. |
| 12 | Material and labour for RCC Type B1 1:2:4, 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 13 | Material and labour RCC Type B1 1:2:4, 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 14 | Material and labour Mild steel bars 10 mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars. |
| 15 | Material and labour Mild steel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cracking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars. |
| 16 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 17 | Dismantling of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors or aprons |
| 18 | Material and labour Granite 18-20 mm thick including 15mm thick screed bed in CM 1:6 (of any type) work (table rubbed and polished) in horizontal steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 19 | Material and labour 18-20mm thick Granite (of any type) work (table rubbed and polished) in vertical for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 20 | Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 21 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 22 | Material and labour Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 23 | Dismantling fencing wire mesh, any type |
| 24 | Supply and fix Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 |
| 25 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ disintegrated soil and removing surplus soil to a distance n.exc 50m & making good surface |
| 26 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 27 | Material and labour for preparation of new steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth. |
| 28 | Supply & Fixing PVC coating GI chain link fencing 3 to 4mm dia, mesh size 50mm x 50mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 29 | Supply and fix Mild steel screw bolts 50 mm long 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 30 | Supply and fix in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed each line wire to be measured) |
| 31 | Material & labour for razor tape concertina coil 610mm dia, 9 SWG hot galvanised springs,125 to 127 clips per coil, 50 circle of wire in each coil ( coil coverage of 6 to 8 RM and weight (not less than) 8.5 Kg per coil), Zinc coating 250 to 300 gms/Sqm, GI wire, GI clips, GI pins and fixed on top of compound wall with angle iron bracket complete all as specified |
| 32 | Material & labour for razor tape concertina coil 1050mm dia, 9 SWG hot galvanised springs,125 to 127 clips per coil, 50 circle of wire in each coil ( coil coverage of 6 to 8 RM and weight (not less than) 15.0 Kg per coil), Zinc coating 250 to 300 gms/Sqm, GI wire, GI clips, GI pins and fixed on top of compound wall with angle iron bracket complete all as specified |
| 33 | Supply and fix Rolled sections as in framing for cladding, glazing and like fixed with angle cleats,screws,bolts etc including embedding in concrete and necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 |
| 34 | Supply and fix in repairs for 15 cm wide decorative wood Fibre Cement plank of dark wooden shade as in wall cladding of thickness 8-12 mm all as specified and directed by Engr-in-Charge. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 36 | Material and labour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 37 | Material and labour coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering CM 1:4.complete all as specified and as directed. |
| 38 | Supply and fix in repair aluminium composite panel of (classic sparkle colours ) 3 mm thick exterior grade PVDF with foil thick of 0.25mmx frame work made out from aluminium section of size 38x25mm supported on masonry/RCC with the help of MS Bracket fixed with brick fastener /anchor fastener and groove fied with 789 weather silent of DOW corning etc including scaffolding of ht 8-10 mtr and fixing as per manufacturer instructions complete all as specified and directed. complete as per architect drg and as per instruction of Engr-in-charge |
| 39 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings |
| 40 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based Crimp/corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/Window Chajja to wall, fixed with self tapping screws as specified |
| 41 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender