Tender For Repair/Maint Of Chajja, Column, Beam, Wall Plaster In Multi Storey Bldg And Internal Perodicals, Joinery, Floor, Plaster And Certain Connected B/R Wks At Sanjay Vihar, 1 Ahq Sig Enclave, 500 Sig Coy & 5 Sig Gp And Other Adjoing Area Of Age
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Chajja, Column, Beam, Wall Plaster In Multi Storey Bldg And Internal Perodicals, Joinery, Floor, Plaster And Certain Connected B/R Wks At Sanjay Vihar, 1 Ahq Sig Enclave, 500 Sig Coy & 5 Sig Gp And Other Adjoing Area Of Age Br Ii Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar in any description and position, complete all as specified. |
| 2 | Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified. |
| 3 | All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used). |
| 4 | S & F MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290-0 including Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified upto six storey height. |
| 5 | M&L PCC 1:2:4 type B1 as in blocks for holdfast,coping,benching etc. including weathering,slightly rounded or chamfered angles or throating all as specified incl necessary steel scaffolding.. |
| 6 | M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified. |
| 7 | Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified. |
| 8 | M & L for 15 mm thick internal rendering in cement mortar 1:6 other than fair face of brick walls/ concrete surfaces finished complete all as specified. |
| 9 | M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface even and fari finished d complete all as specified. |
| 10 | Preparation of newly plastered surfaces of walls and applying two coats of distemper over a coat of primer, complete all as specified and as directed. |
| 11 | M&L Preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 12 | Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatment etc and applying one coat of washable distemper on wall surfaces including preparation of surfaces by primer and filling cracks/holes with putty, up to G+5 storey bldg complete all as specified. |
| 13 | Description all as per serial item No. 12 above, but two coats of washable distemper, complete all as specified and directed. |
| 14 | M&L chipping out, roughening and cleaning spalled/ loose concrete as in RCC columns, beams, slabs, chajjas, parapets, fins and the like members upto 25 mm avarage thickness, washing with water and allowed to dry including derusting existing reinforcement with approved chemical. Supply and fix Mild Steel square wire mesh 65x65x2mm as strengthening reinforcement, applying anti-rust chemical on new wire mesh and guninting chipped surfaces upto 25mm (average) thick with pressure of 2.5 to 3.00 kg/Sqcm, using one part of OPC 43 grade cement and two parts of Ghaggar sand mixed with approved admixture and achieving an even surface including rendering 15mm thick plaster with CM 1:4 finished even smooth without using extra cement finished even and smooth surface including prepartion of two coat of weather proofing exterior paint . Work to be carried out in patches for buildings upto 18 meter height. Anti-rusting, adhesive, admixure chemical shall be of apporved make and incorporated as intructed by the manufacturer for specific application. |
| 15 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified. |
| 16 | S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 17 | Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified. |
| 18 | All as per item no. 17 here-in-before but dia of GI pipe is 15mm. |
| 19 | S&F 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and fixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified an directed. |
| 20 | All as per item no.19 here-in-before but dia of GI pipe is 15mm. |
| 21 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 22 | M& L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed by Engr-in-Charge. |
| 23 | Refixing shutters of any description exc 1 sqm but n.exc 2 sqm each after easing and repair for adjustments etc in the same opening., complete all as specified. |
| 24 | Taking down shutter not exc 1 sqm each of any description complete all as specified. |
| 25 | Taking down shutter exc 1 sqm but n.exc 2 sqm each of any description complete all as specified. |
| 26 | Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified. |
| 27 | Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (with shutter without taking off shutter) complete all as specified. |
| 28 | M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed. |
| 29 | S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting. |
| 30 | S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting. |
| 31 | M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door boltsand two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting. |
| 32 | S& F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats (incl two nos 100 mm long extruded aluminium tower bolts, two nos 75mm long medium weight MS butt hinges, 01 nos 125 mm long extruded aluminium handles and two coats synthetic enamel paint along with one coat of pink primer) all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting |
| 33 | S&F solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supply & Fixing in opening, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II) |
| 34 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick(stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing complete. |
| 35 | S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 100mm complete all as specified. |
| 36 | S&F 200mm long anodised aluminum barrel tower bolt, extruded section complete all as specified. |
| 37 | S&F 100mm long anodised aluminum barrel tower bolt, extruded section complete all as specified. |
| 38 | S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified. |
| 39 | S & F MS helical door spring 150 mm in repair complete all as specified.(Make-Ritz) |
| 40 | S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified. |
| 41 | M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of white lime washing, complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for Preparation of old decorated surfaces(Plastered or unplastered) of ceiling surface by washing, rubbing down existing treatment and applying two coats of white lime washing, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 44 | M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified. |
| 45 | M & L preparing old surface of wall with sand papers etc. including washing, rubbing, filling holes,and uneven surface, finishing old surfaces with sand papers, filling in wall care putty in holes again sand papering thus making smooth surface to receive a coat of alkali resistant primer over already prepared surfaces of walls and applying one or more coat of oil bound distemper on wall surfaces to give an even and smooth surface using roller brush all as specified and directed. |
| 46 | M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of alkali resistant primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge.. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 48 | M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6, G+5 storey bldg complete all as specified. |
| 49 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified. |
| 50 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 G+5 storey bldg complete all as specified. |
| 52 | M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring complete all as specified and as directed |
| 53 | S&F in repair CI floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) dia of out let 75mm complete all as specified and directed by Engineer-in-Charge. |
| 54 | S & F in repairs vitreous China coloured European type WC with \\"P\\" or \\"S\\" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge. |
| 55 | S & F in repairs vitreous chinaware coloured wash hand basin of size 580mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge |
| 56 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 59 | S & F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair PVC connection pipe of 1/2\\"x18\\" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repair of PTMT bib tap fancy type with flange 15mm dia screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repair CP grating 125mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in repairs fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified and directed by Engineer-in-Charge.Make : Prayag, Atul, Commander |
| 65 | S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed by the Engineer-in-Charge.Make Cardin or equivalent to ISI marked |
| 66 | S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and directed by Engineer-in-Charge. Make Cardin or equivalent to ISI marked |
| 67 | Supply and fixing in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed |
| 68 | Supply and fixing in repair Brass CP Wall mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed |
| 69 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified |
| 70 | M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cup board/loft board complete all as specified and directed. |
| 71 | S&F L Bihari hinges conceled cabinet hinges in 'L' Shape and hydrolic mechanism for soft closing complete all as specified. |
| 72 | S&F in 40mm dia, cupboard knobs fixed with nut, screw andwasher of mild steel, bright finished for kitchen cup boards shutters, cabinets, crocery shelf drawers complete all as specified. |
| 73 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 74 | S&F sinks with drainage board made of stainless steel 1mm thickkitchen or laboratory with plugs, washers and wastes; includingbedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm including taking out existing china ware sink with waste fittings complete all as specified. |
| 75 | S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc including aluminium grill complete all as specified. |
| 76 | S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 77 | S&F Powder Coated aluminium window and ventilator shutters, side hung type OR sliding windowwithout sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. |
| 78 | S&F 4.00 mm thick plain sheet glass and glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified. |
| 79 | M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed. |
| 80 | S & F in cast iron(sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches or in floors or fixed to walls, bore of pipe 100mm including all fittings like bends, clamp etc and taking down old CI pipe complete all as directed. |
| 81 | All as per item No. 80 above but 75mm bore |
| 82 | S&F 75mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified. |
| 83 | All as per item 82 but 100mm dia (bore of pipe) bends |
| 84 | S&F bends of cast iron pipes with heel rest above but fitted with oval access door for 100mm dia (bore of pipe). |
| 85 | All as per item 84 above but fitted with oval access door for 75 mm dia (bore of pipe) |
| 86 | S & F 75mm dia (bore of cast iron pipe) branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access door, complete all as specified. |
| 87 | All as per item 86 above but 100mm dia (bore of pipe). |
| 88 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender