Tender For Repairs To Path, Hard Standing, Chain Link Fencing, Barbed Wire Fencing, Boundary Wall, Area Drainage, Culverts, Kerb Stones And Plinth Protection Under Age B/R -Ii Area At Ge (N) Ahilyanagar
Tender Value
95 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
16 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Path, Hard Standing, Chain Link Fencing, Barbed Wire Fencing, Boundary Wall, Area Drainage, Culverts, Kerb Stones And Plinth Protection Under Age B/R -Ii Area At Ge (N) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level all as directed. |
| 2 | Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified. |
| 3 | M&L for providing 75mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub base complete all as directed. |
| 4 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match in floors, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for coloured parking tiles, heavy duty of size 300 x 300 x 10 mm thick, approved by GE, set, jointed and pointed in neat cement slurry with grey cement and pigment to match in floors, over and including screed bed or bedding layer of 15 mm in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for 60 mm thick, factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and directed. |
| 7 | M&L for 80 mm thick, factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and directed. |
| 8 | M & L for 40 MM thick PCC (1:2:4), type B0, using 12.5 mm graded stone aggregate as in flooring, path etc complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L for 30 mm thick Rough dressed (shahabad) lime stone slab flooring, laid dry but bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/plinth etc over and complete all as specified and directed |
| 10 | Fixing only for 30 mm thick Rough dressed (shahabad) lime stone slab flooring, laid dry but bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/plinth etc over and including taking out existing stone slab carefully and complete all as specified and directed by Engr-in-charge |
| 11 | M&L for providing 75mm thick PCC 1:3:6, type C2, using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 12 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 13 | M & L for Hardcore of Broken stone or boulder, Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as directed. |
| 14 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground all as directed. |
| 15 | Dismantling fencing wire mesh any type (barbed wire, chain link fencing, GI Mesh etc) complete all as specified and directed by Engr-in-charge. |
| 16 | Excavation in post holes (or similar holes) each not exceeding 0.50 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. |
| 17 | M & L for plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete for boundary pillars and fencing posts (including caps and bases) including necessary formwork etc complete all as specified and directed by Engineer-in-Charge |
| 18 | Supply and Fabricate, erect and fix in position mild steel work, as in fencing post/struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165. |
| 19 | M&L for mild steel deformed bars 10mm dia & over cut to length bent to shape including cranking, bending spirally for hooping for columns hooking ends & binding with MS wire annealed not less than 0.9 mm dia or security with clips all as directed. |
| 20 | Supply only chain link fencing of any size, mesh and type as specified and directed. |
| 21 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire as specified and directed. |
| 22 | S& F 10mm dia MS bolts, screw, machine made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut 5cm long etc complete all as specified & directed . |
| 23 | Supply and fix in repairs galavanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc., (Each line of wire to be measured) all as directed. . |
| 24 | M & L for preparing steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed. |
| 26 | S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed. |
| 27 | Demolition of brickwork or stone boulder masonary built in cement mortar or lime mortar complete all as specified |
| 28 | M & L for brickwork with fly ash modular brick, straight or curved on plan exc 6m mean radius, built in built in cement mortar 1:6 complete all as specified and as directed. |
| 29 | M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, brought upto course complete all as specified and as directed. |
| 30 | M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width, in PCC 1:5:10, M-5, type E-1, using 20 mm graded aggregates and setting in cement mortar 1:6 complete all as directed. |
| 31 | All as per item No. 30 here in before but except block complete all as specified and as directed. |
| 32 | M&L for precast cement concrete Type C-0, 1:3:6 (using 12.5 mm aggregate) set in cement mortar 1:6 as in louvres and jallies, 25 mm thick (measured solid) including all moulding but excluding frame (precast frame shall be measured seperately and paid for under item) all as directed |
| 33 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n.exc. 40 mm in Lime or sand stone complete all as specified and as directed. |
| 34 | Raking out cement mortar joints/pointing to random rubble uncoursed or brought up to courses etc complete all as directed |
| 35 | M&L for pointing to random rubble uncoursed or brought up to courses in CM 1:4 etc complete all as specified |
| 36 | Taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key complete all as directed |
| 37 | M&L for rendering 15 mm thick on stone/brick/concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and directed. |
| 38 | M & L for Providing high prestress precast cement concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, including of cost of high tensile carbonized steel with 4 nos wire of dia 3 to 4mm, Form work complete with joints to match as directed by Engr in charge.MAKE : Universal or techno commercial equivalent make as approved by GE |
| 39 | S&F for 50 mm thick prestressed precast cement concrete M-25 using compound wall (both Side smooth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4, (measured solid ), including cost of high tensile carbonized steel with 4 nos wire of dia 3 to 4mm , Form work and all mouldings but excluding frame as directed by Engr in charge.MAKE : Universal or techno commercial equivalent make as approved by GE |
| 40 | M&L for U shaped precast RCC drain, type light, Internal size 300 x 300 mm and outer 440 x 370 mm, fixed over PCC with 20 mm cement slurry, complete all as specified and directed by Engineer in Charge. |
| 41 | M&L for precast drain cover over U shaped precast RCC drain, type light, Internal size 300 x 300 mm, complete all as specified and directed by Engineer in Charge. |
| 42 | Demolition of Reinforced Cement Concrete of any description and in any position complete all as specified and as directed by Engr-in-Charge |
| 43 | M & L for plain Cement concrete (1:4:8), type D-2, using 40mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge |
| 44 | M & L for RCC (design Mix) M-25 (20 mm Aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 45 | M & L for RCC (design Mix) M-25 (20 mm Aggregate) for Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed. |
| 46 | M&L for RCC (design Mix) M-25 (20 mm Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 47 | M&L for Mild Steel TMT bars (Fe-500 D) 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed by Engineer-in charge. |
| 48 | M&L for Mild Steel TMT bars (Fe-500) 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete. |
| 49 | Formwork to sides of concrete foundations, footings,bases of columns,raft beam plinth beam flat rough finished surfaces of concrete etc complete all as specified and directed |
| 50 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed. |
| 51 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 52 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 53 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 54 | M & L for preparing of new plastered surfaces of wall and applying two coats for cement based paint over one coat of alakali resistant priming paint any height including scaffolding etc complete all as specified and as directed. |
| 55 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint over new surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 56 | M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint any height including scaffolding etc complete all as specified and directed |
| 57 | M&L for preparation of old plastered treated surface of wall by brooming down and applying one coat of weather proof 100 % acrylic exterior emulsion paint of any tint as approved by GE after cleaning the surface complete all as specified and directed |
| 58 | M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed |
| 59 | Cleaning of sewage pipe line (RCC / SGSW) by mechanical means such as Rotary cutter etc including removal of roots inside the pipe etc, including rodding manually or mechanically from manhole to manhole and removing the waste materials / sludge, disposing to a distance n.exc 50 m and burying in borrow pits and covering with mud all as directed of any diameter of pipe etc complete all as specified and directed by Engineer-in-Charge Note:- (i) Contractor shall take all Precantionery measures during cleaning of sewage line / septic tanks etc. (ii) Contractor shall provide First Aid box, shoes, hand gloves, mask & required clothing to the workers at site. (iii) It shall be the responsibility of Contractor that if any mishap happens at site, Govt shall not be liable to pay any type of compensation. |
| 60 | Cleaning/desludging of existing Manhole/septic tank of any capacity/sump well of any dia and depth including taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc, cleaning the premises using chlorine powder etc complete all as specified and directed by Engineer-in-Charge |
| 61 | S&F in repair of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 62 | S&F in repair of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 63 | S&F in repair of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 64 | S&F in repair of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 65 | S&F in repair of 110mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 66 | S&F in repair of 75 mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 67 | S&F in repair of 110mm bore PVC (SWR) branch piece single (single Y) equal or unequal all as specified and as directed. |
| 68 | S&F in repair of 110 mm bore PVC (SWR) bends with access door all as specified and as directed. |
| 69 | S&F in repair of 75 mm bore PVC (SWR) bends with access door all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender