Tender For Repair/ Replacement Of Unsv Point Wiring, Fitting/ Fixtures, Led Inverter Lights, Db And Unsv Earthing At Zone A Various Single Living & Married Accn And Wards At Bhdc Under Ge (East) Delhi Cantt-10
Tender Value
39.62 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
79240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Unsv Point Wiring, Fitting/ Fixtures, Led Inverter Lights, Db And Unsv Earthing At Zone A Various Single Living & Married Accn And Wards At Bhdc Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power etc) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed. |
| 2 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed. |
| 3 | M&L for point wiring concealed type for Modular fitting with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories , blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match theexisting for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. |
| 4 | Description all as per item no. 3.00 but 05 amp socket outlet on same board with 1.5 sqmm FRLSH copper conductor. |
| 5 | Description all as per item no. 3.00 but light point controlled by two way switch with 1.5 sqmm FRLSH copper conductor. |
| 6 | Description all as per item no. 3.00 but 15 amp socket outlet on independent board with 2.5 sqmm FRLSH copper conductor as main, neutral & earth. |
| 7 | Description all as per item no. 3.00 but for AC/Geyser point with 4 sqmm FRLSH copper conductor as main, neutral & earth. |
| 8 | M&L point wiring with casing capping duly fitted on wall for Normal / Modular switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through casing capping as requirement of site including cadmium plated screws as per ISI, including 1.5 Sqmm size earth continuity conductor to common earth and connecting to earth dolly for One light/fan/bell point controlled by one No 5 Amp, one way switch/bell push complete all as specified and as directed. |
| 9 | Description all as per item no. 8.00 but 05 amp socket outlet on same board with 1.5 sqmm FRLSH copper conductor. |
| 10 | Description all as per item no. 8.00 but light point controlled by two way switch with 1.5 sqmm FRLSH copper conductor. |
| 11 | Description all as per item no. 8.00 but 15 amp socket outlet on independent board with 2.5 sqmm FRLSH copper conductor as main, neutral & earth. |
| 12 | Description all as per item no. 8.00 but for AC/Geyser point with 4 sqmm FRLSH copper conductor as main, neutral & earth. |
| 13 | S&F in replacement modular cover plate made of durable, UV-stabilized, impact-resistant, and flame-retardant polycarbonate material complete with matching inner mounting frame (grid) of approved make, suitable for housing modular switches, sockets and fan regulators including inner frame shall be securely fixed to the existing metal/plastic flush-mounted wall box using corrosion-resistant screws, and the front cover plate shall feature a secure, clip-on, screwless mechanism to ensure a completely flush and clean finish, including all necessary connections and alignment as directed. |
| 14 | Description all as per item no. 13.00 but for 1 or 2 module cover plate with frame. |
| 15 | Description all as per item no. 13.00 but for 3 module cover plate with frame. |
| 16 | Description all as per item no. 13.00 but for 4 module cover plate with frame. |
| 17 | Description all as per item no. 13.00 but for 6 module cover plate with frame. |
| 18 | Description all as per item no. 13.00 but for 8 module cover plate with frame. |
| 19 | Description all as per item no. 13.00 but for 12 module cover plate with frame. |
| 20 | Description all as per item no. 13.00 but for 16 module cover plate with frame. |
| 21 | Supply and fix in replcement of heavy-duty, factory-fabricated Galvanized Iron (GI) flush-mounted modular wall box of approved make, minimum 18 SWG (Standard Wire Gauge) thickness, complete with earth terminals and knockouts for conduit entry, The above work shall be embedded flush in the wall/ceiling using cement mortar (1:3), aligned perfectly plumb, and finished smooth to receive the modular mounting frame and cover plate, including all necessary civil cutting, chasing, and making good the surface as directed. |
| 22 | Description all as per item no. 14.00 but for 1 or 2 module. |
| 23 | Description all as per item no. 14.00 but for 3 module. |
| 24 | Description all as per item no. 14.00 but for 4 module. |
| 25 | Description all as per item no. 14.00 but for 6 module. |
| 26 | Description all as per item no. 14.00 but for 8 module. |
| 27 | Description all as per item no. 14.00 but for 12 module. |
| 28 | Description all as per item no. 14.00 but for 16 module. |
| 29 | Supply and Fix in replcement modular switches of approved current rating, 240V AC, 50Hz, single-pole, 1-way, 2-way and bell push type of IndoAsian make (Shynora / Elvira / Glint or approved series), conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 30 | Description all as per item no. 15.00 but modular switch, 1 way, 6 Amp, 1 Module, complete. |
| 31 | Description all as per item no. 15.00 but modular switch, 2 way, 6 Amp, 1 Module, complete. |
| 32 | Description all as per item no. 15.00 but modular switch, 1 way, 16 Amp, 1 Module, complete. |
| 33 | Description all as per item no. 15.00 but modular bell push, 6 Amp, 1 Module complete. |
| 34 | Supply and Fix in replacement modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type of IndoAsian make (Shynora / Elvira / Glint or approved series) , conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 35 | Description all as per item no. 16.00 but modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete. |
| 36 | Description all as per item no. 16.00 but modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete. |
| 37 | S&F in replacement 2-Module, of approved current rating, 240V AC, 50Hz, Step-Type Modular Fan Regulator IndoAsian make (Shynora / Elvira / Glint or approved series), complete with a rotary knob for hum-free speed control, stepped regulation, and matching cover plate, securely mounted in the existing modular switchboard matrix including all necessary internal wiring and connections as per site requirements |
| 38 | Supply and Fix in replacement modular switches of approved current rating, 240V AC, 50Hz, single-pole, 1-way, 2-way or Bell push type of Anchor Roma make (Roma Classic / Roma Urban series), conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 39 | Description all as per item no. 18.00 but modular switch, 1 way, 6 Amp, 1 Module, complete. |
| 40 | Description all as per item no. 18.00 but modular switch, 2 way, 6 Amp, 1 Module, complete. |
| 41 | Description all as per item no. 18.00 but modular switch, 1 way, 16 Amp, 1 Module, complete. |
| 42 | Description all as per item no. 18.00 but modular bell push, 6 Amp, 1 Module complete. |
| 43 | Supply and Fix in replacement modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type of Anchor Roma make (Roma Classic / Roma Urban series) , conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 44 | Description all as per item no. 19.00 but modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete. |
| 45 | Description all as per item no. 19.00 but modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete. |
| 46 | S&F in replacement 2-Module, of approved current rating, 240V AC, 50Hz, Step-Type Modular Fan Regulator Anchor Roma make (Roma Classic / Roma Urban series), complete with a rotary knob for hum-free speed control, stepped regulation, and matching cover plate, securely mounted in the existing modular switchboard matrix including all necessary internal wiring and connections as per site requirements. |
| 47 | Supply and Fix in replacement non-modular switch of approved current rating (6A/16A), 240V AC, 50Hz, single pole, one-way, Bell push or two-way type duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker/piano design, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards, complete all as specified and as directed. |
| 48 | Description all as per item no. 21.00 but for piano type 1 way, 6 Amp, 1 Module, complete. |
| 49 | Description all as per item no. 21.00 but for piano type 1 way, 16 Amp, 1 Module, complete. |
| 50 | Description all as per item no. 21.00 but for piano type bell push 1 way, 16 Amp, 1 Module, complete. |
| 51 | Supply and Fix in replacement non-modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type, duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards complete all as specified and as directed. |
| 52 | Description all as per item no. 22.00 Socket outlet, 16/6 Amp, 3/5 Pin, combined complete. |
| 53 | Description all as per item no. 22.00 Socket outlet, 6 Amp, 2/3 Pin, combined complete. |
| 54 | Supply and Fix in replacement non-modular fan regulator of approved rating, 240V AC, 50Hz, hum-free step-type duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with high-quality internal electronic components for energy efficiency and smooth speed control, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards, complete all as specified and as directed |
| 55 | S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed. |
| 56 | S&F in replacement Plug Top, 15 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed. |
| 57 | S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting complete all as specified and as directed. |
| 58 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed. |
| 59 | S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed. |
| 60 | S&F in replacement sub main wiring with 2 runs of FRLSH single core, PVC insulated & unsheathed cable of required size, 1100 Volts grade, with multi stranded copper conductor, drawn through concealed/surface PVC rigid, non-metallic conduit, medium grade, as per relevant IS codes, complete with all necessary conduit fittings and one run of required size PVC insulated copper conductor as earth continuity wire, complete all as specified and as directed.Note:- Two run of conductor as phase and neutral and one run of conductor of same size as earth wire complete shall be measure as one RM. |
| 61 | Description all as above Sr. No. 29.00 but for 4.0 sqmm FRLSH copper conductor submain complete as main, neutral & earth. |
| 62 | Description all as above Sr. No. 29.00 but for 6.0 sqmm FRLSH copper conductor submain complete as main, neutral & earth. |
| 63 | Description all as above Sr. No. 29.00 but for 10.0 sqmm FRLSH copper conductor submain complete as main, neutral & earth. |
| 64 | S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. |
| 65 | S&F DBOXx MCB Protected socket AC Box in PVC Plastic base in 4 module with 20 Amp MCB and plug top complete in all aspect all as specified and directed. |
| 66 | S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 67 | S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 68 | S&F in repair load line, distribution board, double door type, TPN, vertical, 12 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 69 | S & F in repair for distribution board double door type, SPN, 16 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 70 | S & F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 71 | S & F in repair for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 72 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2'X2', 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 73 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2'X2', 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Warm White (3000K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 74 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 75 | Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 76 | S&F in replacement Bldg security light fitting LED 45 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. |
| 77 | Supply and fix recessed type round LED downlight fixture, operating on 230V, 50Hz AC supply made up of pressure die-cast polyucorbonate housing with an integrated high-efficiency driver, high-transmittance frosted diffuser for glare-free uniform light distribution and heavy-duty spring clips for secure ceiling mounting. complete with making necessary connections with PVC insulated copper conductor wire, earthing terminal, and required accessories as per site requirements and direction of the Engineer-in-Charge |
| 78 | Description all as per item no 43.00 here in before but for capacity of 06 watt. |
| 79 | Description all as per item no 43.00 here in before but for capacity of 12 watt. |
| 80 | Description all as per item no 43.00 here in before but for capacity of 15 watt. |
| 81 | Supply, fixing and connecting in replacement of LED TUBE of 20 watt capacity in polycorbonate housing frame used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV. Total system Lumen of 20W Led should be 2000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 82 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed.Note:- The unit rate quoted shall be include for necessary excavation and earth work, earth strip connected to test point max 7 mtr as per site requirement, PCC 1:2:4 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth strip/wire. |
| 83 | S&F in repair PVC casing caping, medium grade, size 25 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed. |
| 84 | S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed. |
| 85 | Description all as per item No 47.00 here in before but 25 mm bore complete all as specified and as directed. |
| 86 | S&F in repair Plastic surface box 3 module for 3 Module Sheet cover complete all as specified and as directed. |
| 87 | S&F in repair Plastic surface box 6 module for 6 Module Sheet cover complete all as specified and as directed. |
| 88 | S&F in repair Plastic surface box 12 module for 12 Module Sheet cover complete all as specified and as directed. |
| 89 | S& F PVC Ventilation fan 250 mm sweep 240 Volt, 1325RPM, Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. |
| 90 | S & F Heavy Duty Metallic Ventillation Fan 300 mm sweep 240 Volt, 1400 RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. |
| 91 | Supply & fixing of BLDC ceiling fan complete with blades, down rods, Min air delivery 210 CFM with service value 6.00 BEE, 5 star rating (White colour) 230 V, 1200 mm sweep, speed 340 RPM, having rod length 300 mm complete all as specified and directed by Engr-in-charge. |
| 92 | Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc10 cm girth complete all as specified and as directed. |
| 93 | S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. |
| 94 | S & F in repair MCCB 415 V, 100 Amps, 35 KA, 4 Pole complete all as specified and directed. |
| 95 | S & F in repair MCB TPN, 415 Volts, 100 Amps complete all as specified and directed. |
| 96 | S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed. |
| 97 | S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed. |
| 98 | S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed. |
| 99 | S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed. |
| 100 | S & F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed. |
| 101 | S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed. |
| 102 | Supply only rechargeble LED light multifunctinal long range hand held light of 15 Watt capacity with powerful beam and emergency mode with inbuilt battery complete of make Philips Blaze in all aspect all as specified and as directed. |
| 103 | Supply and fix heavy-duty galvanized iron downrod for ceiling fans, minimum 20mm outer diameter, finished with a stove-enameled/powder-coated matching color to the fan with complete necessary heavy-duty hex bolts, lock nuts, split pins (cotter pins), and top/bottom rubber shackles (vibration dampeners) to ensure rigid and vibration-free mounting from the ceiling hook all as per required at site. |
| 104 | Description all as per item no 66.00 above but for the length of 450 mm complete. |
| 105 | Description all as per item no 66.00 above but for the length of 600 mm complete. |
| 106 | Description all as per item no 66.00 above but for the length of 750 mm complete. |
| 107 | Description all as per item no 66.00 above but for the length of 900 mm complete. |
| 108 | M&L for servicing and re-installation of existing ceiling fan of any sweep size, including complete removal of the fan assembly from the ceiling hook, safe disconnection of electrical wiring, and full disassembly of the motor housing, blades, and down-rod including thorough cleaning of internal and external components, removal of old residue, and necessary greasing and oiling of bearings using high-grade lubricants to ensure smooth, noise-free operation with mandatory replacement of all worn out, rusted, or damaged nuts, bolts, washers, and split safety pins with brand new, high-tensile hardware. The scope of work also cover the complete re-assembly, robust re-fixing to the ceiling, proper electrical reconnection, blade balancing to eliminate wobbling, and a successful test run at all speeds, including all labor, tools, scaffolding, and consumables complete as per the direction of the Engineer-in-Charge. |
| 109 | M & L for Painting of existing ceiling fan of any sweep size, complete surface preparation (sanding and rust removal), application of one coat of primer and two coats of premium enamel/PU spray paint of approved shade. |
| 110 | Supply and replacement of 2.5 MFD capacitor of approved make for existing ceiling fan, including testing the fan for low speed/faulty capacitance, disconnecting the existing capacitor, installing and testing the new capacitor with proper wire termination, insulation, and checking the direction of rotation, including all labor, tools, and consumables complete |
| 111 | M&L for rewinding of existing ceiling fan motor of any sweep size using super-enameled copper (Cu) wire of required gauge, including complete dismantling of the fan assembly from the site, safe disconnection of electrical wiring, and to-and-fro transportation to the workshop including dismantling of the motor housing, removing the burnt/damaged winding, cleaning the stator slots, providing high-quality insulation paper, fresh machine-rewinding, applying insulation varnish with proper baking, replacing connections, and testing for continuity, insulation resistance (megger test) and earth fault and returning the fan to the site, complete re-assembly, robust re-installation to the ceiling hook, electrical reconnection, blade balancing to eliminate wobbling and a successful test run complete with all transport, labor, tools, premium materials, and consumables. |
| 112 | S&F in replacement wall-mounted fan of 400 mm sweep, suitable for single-phase, 230V, 50 Hz AC supply of approved make (such as Crompton / Havells / Orient / Bajaj), including secure fixing of the mounting bracket to the wall/column using heavy-duty rawl plugs and dash fasteners. The scope encompasses necessary electrical connection from the nearest existing plug point or ceiling rose using flexible 3-core copper cable of appropriate rating, checking proper 3-speed control functionality, smooth oscillation mechanism, tilt adjustment, and a successful test run complete. |
| 113 | S&F in replacement bearing No 6200/6201/6203/6204 suitable for Ceiling fans/Exhaust fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense). |
| 114 | S&F in replacement bush suitable for Ceiling fans/Exhaust fan/padestal fan/wall fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense). |
| 115 | Supply and fix of 1100V grade, single-core, flexible/stranded copper conductor cable, FR-LSH insulated as per relevant IS codes, of approved make and of required size safely packed in standard coils/drums of 90/100 meters, complete in all aspect all as specified and as directed. |
| 116 | Description all as per item no 74.00 but for 1.5 sqmm copper conductor cable of single core. |
| 117 | Description all as per item no 74.00 but for 2.5 sqmm copper conductor cable of single core. |
| 118 | Description all as per item no 74.00 but for 4.0 sqmm copper conductor cable of single core. |
| 119 | Supply and fix 3-core, PVC insulated, FRLSH (Flame Retardant Low Smoke Halogen) PVC sheathed, unarmored copper conductor cable of under mentioned size, for 1100V grade conforming to IS: 694 / IS: 7098 (Part-1), complete in all aspects all as specified and as directed. |
| 120 | Description all as per item no 75.00 but for 1.5 sqmm copper conductor cable of three core complete. |
| 121 | Description all as per item no 75.00 but for 2.5 sqmm copper conductor cable of three core complete. |
| 122 | Description all as per item no 75.00 but for 4.0 sqmm copper conductor cable of three core complete. |
| 123 | Supply and fixing of PVC Exhaust Fan Motor (Capacity: 30W–45W, Speed: Min. 1350 RPM), suitable for 230V, Single Phase AC supply, complete with capacitor for 200-300 mm sweep PVC Ventillation fan with internal wiring connection, testing, and commissioning as required all as specified and as directed. |
| 124 | Supply and fixing of 300 mm sweep Heavy-Duty Iron Exhaust Fan Motor (Capacity: 75W–90W, Speed: Min. 1400 RPM), suitable for 230V, Single Phase AC supply, complete with heavy-duty capacitor, core termination, testing, and commissioning as required all as specified and as directed |
| 125 | Supply and fixing of 380 mm to 450 mm sweep Industrial Heavy-Duty Metallic Exhaust Fan Motor (Capacity: 150W–250W, Speed: 900–1400 RPM), suitable for 230V Single Phase / 415V Three Phase AC supply, including mounting, internal wiring connection, testing, and commissioning as required all as specified and as directed. |
| 126 | Supply and Fix of a 1.5 µF to 4 µF, 440V AC (50Hz) self-healing metallized polypropylene run capacitor suitable for Exhaust fan, featuring a flame-retardant casing, low dissipation factor, and high insulation resistance complete in all aspect all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender