Tender For Welcome Maintenance To Officers Accn In Domestic Area At Af Stn Suratgarh.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance To Officers Accn In Domestic Area At Af Stn Suratgarh.
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (WELCOME MAINTENANCE TO OFFICERS ACCN IN DOMESTIC AREA AT AF STN SURATGARH.) |
| 2 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 4 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 5 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 6 | M&L Factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 7 | M&L Factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 8 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 9 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 10 | S&F Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 11 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 12 | S&F as in replacement stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 13 | M& L in replacement for 18mm thick solid HDHMR board with 0.9-1.20mm thick sunmica leminated sheet on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 14 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 15 | S&f 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as per direction of Engineer-In-Charge. |
| 16 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt inges and necessary S S screws shall be paid separately) |
| 18 | Easing of Aluminium windows or door shutters of any size/any number of panels for easy closing/opening tightning of hinges or changing the position of hinges,repair/replacement of rubber beading and cleaning the sliding portion to easily slid to windowand locking arrangement etc complete all as directed. |
| 19 | S&F 300mm long aluminium alloy, anodised, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed. |
| 20 | S&F of 300 mm ,mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & as directed. |
| 21 | &L for Plain cement concrete 1:2:4 type B-I (20mm graded stone aggregate) 40 mm thick as flooring finished ever & smooth, complete all as specified and directed by Engineer-in-Charge |
| 22 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5 m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand). Complete all as specified and directed. |
| 23 | Demolition fo stone slabs/ tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing rubbish from the premises. Complete all as specified and directed. |
| 24 | M&L for 18-20 mm thick Granite stone slab machine cut( table rubbed and polished) in steps ,jambs,pillars,window cills ,cooking platform, laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including polishing complete all as specified. |
| 25 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with complete all as specified and directed by the Engineer in Charge. |
| 26 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge |
| 27 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with complete all as specified and directed by the Engineer in charge. |
| 28 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with & complete all as specified and directed by the Engineer in charge. |
| 29 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.36]Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in Charge. |
| 30 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 31 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 32 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 33 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 34 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 35 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 36 | M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 37 | M&L for complete removal of existing treatment from ceilling surfaces and applying two coats of oil emulsion distemper complete all as specified and directed by Engr in charge. |
| 38 | M&L for preparation of old surfaces of walls and applying one coat of white wash, complete all as specified and directed. |
| 39 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over new plastered surfaces , including preparation and using primer,complete all as specified and directed. |
| 40 | M&L for applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over old wall surfaces , including preparation and using primer,complete all as specified and directed. |
| 41 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 42 | M&L for Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for applying one coat of distemper oil emulsion on old plastered surfaces of on wall including preparation of surfaces complete all as specified |
| 45 | M&L for Preparation of new plastered surfaces of ceiling,chajja etc and applying two coat of OBD over and including 1 coat of primer on ceilling, complete all as specified and directed by Engineer –in-Charge. |
| 46 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 47 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 48 | S&F in replacement CP wall mixture lead fancy type hanging arrangement and telephonic shower suitable for 15 mm bore pipe fixed to wall as specified and directed. |
| 49 | Supply and fixing in replacement, wash hand basin vitreous china flat back 550 x 400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed. |
| 50 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 51 | S&F in replacement stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed. |
| 52 | S&F in replacement Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified. |
| 53 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 54 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 55 | S&F in replacement, 15mm bore, WHB/Sink mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 56 | S&F in replacement looking mirror of size as directed premium quality 5.5 mm bevelled edges of selected quality glass, CP brass screws all as specified and directed. |
| 57 | S&F in replacement towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 58 | S&F in replacement glass corner shelf 12\\" with brass brackets of heavy duty and thickness of glass min 6mm and railing 60cm long fixed all as directed |
| 59 | S&F Health faucet mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified. |
| 60 | S&F in replacement plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, all as specified and directed Engr-in-Charge. |
| 61 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 62 | All as per Sr item No 60 here in before but tank of capacity 500 Ltr . complete all as specified. |
| 63 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 64 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 65 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for any capacity ltrs capacity of tanks and removing rubbish from the premises as directed by eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning) |
| 66 | S&F in replacement coloured vitreous china wash down water closet with cascade type fitting with syphonic action dual type flushing cistern in single piece pattern with inlet, ball valve, float and double push button, incl fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with one toilet paper holder, one health faucet and one CP jet spray with 2 x 1 m CP flexible tube complete all as specified and directed. |
| 67 | S&F in replacement Long Body Bib taps,15 mm cast copper alloy,chromium plated ,fancy type ,screwed down , screwed for iron pipe , complete all as specified and directed by the Engineer in Charge. |
| 68 | Supply and fixing as in replacement stainless steel plate rack made out of 1mm thick stainless steel sheet size of rack 600 mmx750 mmx250 mm, complete all as specified and directed. |
| 69 | S&F in replacement bathroom PVC cabinet with best quality mirror, shelves inside, size 450mm x 600mm including required fittings all as directed. |
| 70 | S&F stainless Steel Telescopic Drawer Channel/Runner of size 18-20 Inch with 3 Ball Bearing Weight Capacity Upto 45 kg complete all as specified and directed |
| 71 | S&F stainless Steel fancy type round D Drawer Cabinet Handles, 4 Inch including all fitting complete all as directed by Engr-in-Charge |
| 72 | Supply & fixing of auto soft closing hinges openable at or duck hinges for kitchen cabinet shutters. |
| 73 | S&F White Virgin Magnet Catchers For Cupboard, including screws etc complete all as specified and directed. |
| 74 | Grating doom CP 125 mm dia with or without waste pipe hole (minimum weight 40 gms) fixed in repairs complete all as specified and directed. |
| 75 | Supply and fix in replacement mild steel cupboards shutters with 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle , two shelve sbuttt hinges ,peg set of their,etc including two coat of synthetic paint over primer with & including taking down of existing cupboard/wardrobe complete all as specified and directed. |
| 76 | Waterproofing membrane:Supplying and applying water-based ,single component UV resistant elastomeric PU liquid membrane coating applied with brush/roller having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240. The system includes final base preparation as per note given below, applying Home Sheild PU ELASTOSEAL BTD or approved product in three coats at 1.85 kg per Sqm providing min 1 mm DFT , complete as per Manufacturer specifications along with 45 GSM Fiber mesh sandwiched between 1st and 2nd coat . Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300 mm above FFL which should be sealed with Polymer Mortar. Additional layer of geotextile membrane for the protection of waterproffing membrane .The application will be executed by company authorised applicator upon verification from the company.Before tratment, repair of roof should be done by contractor as required (CM pointing 1:4 and PCC 1:2:4) |
| 77 | Surface Preparation: i) The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mm*75mm) all around the periphery of the wall with polymer modified mortar using SBR Latex Plus.ii) All construction joints and cracks >1mm shall be treated by cutting V groove and filling with polymer modified SBR Latex and reinforced with geotextile membrane dipped in PU liquid Membrane before the 1st coat application. |
| 78 | M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 79 | M&L for Raking out cement/cement mortar in joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc. with and including Flush pointing to bricks laid flat or brick tiles in CM 1:3 mixed with liquid water proofing compound. Complete all as specified and directed |
| 80 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender