Tender For Addn/ Altn To Boundary Wall, Provn Of Hot And Cold Ac And Geysers And Upgradation Of Elect Wiring Items And Connected Accessories, Provn Of Dining Hall And Garbage Bin At repair renovation Officer Transit Facility Under Ge (East) Delhi Can
Tender Value
48.97 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
97950
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Boundary Wall, Provn Of Hot And Cold Ac And Geysers And Upgradation Of Elect Wiring Items And Connected Accessories, Provn Of Dining Hall And Garbage Bin At repair renovation Officer Transit Facility Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in any type of soil complete. |
| 2 | Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and as directed. |
| 3 | Removing excavated materials to a distance exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 5 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed. |
| 6 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed. |
| 7 | M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide |
| 8 | M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed. |
| 9 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed. |
| 10 | M & L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 11 | Description all as per item 10 above but MS Tie bars 8mm dia and over upto and including 8mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 12 | M & L for RCC M25 Design Mix using 20mm graded agg as in footings, plinth beam and bases of columns complete all as specified and as directed. |
| 13 | M & L for RCC M25 Design Mix using 20mm graded agg as in beams,lintle/tai bands cantilevers, over wall bressumers, lintel over 1.5m clear span supported on walls complete all as specified and as directed. |
| 14 | M & L for RCC M25 Design Mix using 20mm graded agg as in columns , piers posts and struts complete all as specified and as directed. |
| 15 | M & L for RCC M25 Design Mix using 20mm graded agg as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and as directed. |
| 16 | M & L for 15mm thick rendering in cement mortar 1:4 on other than fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scaffolding etc, complete all as specified and as directed. |
| 17 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 18 | Demolition of PCC paver blocks and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 19 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base complete all as specified and as directed. |
| 20 | S & F factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 50cm to 75cm height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, 18mm thick WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\\"x3\\" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Cobra/ Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site) |
| 21 | M & L for Coloured Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in over 30mm thick layer of sand as in floor/path complete all as specified and as directed. |
| 22 | S&F in repair 16 to 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, walls, window cills, cooking platforms and like in including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching and moulding, polishing, over and incl 10mm thick rendering/ backing coat in CM 1:3, complete all as specified and as directed . |
| 23 | Demolition Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 24 | M & L for brick work in CM 1:6 using Sub class \\"B\\" bricks straight or curved on plan exc. 6mm mean radius complete all as specified and as directed. |
| 25 | M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster in 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. (Note : Rate for making groove shall be deemed included in unit rate quoted and no extra payment shall be made for this item) |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 27 | M & L for coloured glazed wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.18 Sqm of 8-10mm thick on vertical/Horizontal surfaces of wall over and incl 10mm thick rendering in CM 1:4 and as per sample approved by Engr-in-charge or GE complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 28 | M & L for coloured glazed wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.18 Sqm of 8-10mm thick on vertical/Horizontal surfaces of wall over and incl 10mm thick rendering in CM 1:4 and as per sample approved by Engr-in-charge or GE complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender