Tender For Repair Of Veterinary Dispensary Building Challah Distt. Kangra (Hp) (Sh:- Dismantling And Reconstruction Of Reinforced Cement Concrete Slab & Providing And Laying Tile Work And Painting Work Etc.).
Tender Value
2.96 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
6000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Veterinary Dispensary Building Challah Distt. Kangra (Hp) (Sh:- Dismantling And Reconstruction Of Reinforced Cement Concrete Slab & Providing And Laying Tile Work And Painting Work Etc.).
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres as per direction of Engineer - in- charge. as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.. |
| 2 | Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 3 | Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 4 | Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 5 | Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (Twenty newton per square millimeter) with cement content not less than 320 kg/cum (Three hundred twenty Kilogram per cubic metre) and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 6 | Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 7 | 6mm (six millimetre) cement plaster 1:4 (one cement isto four sand) in ceiling complete including curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 8 | 15mm (fifteen milimetre) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 9 | Providing and fixing on wall face PVC (D-plast) rain water pipes of working pressure not less than 4.00/6.00 kg (four to six kilogram) per centimetre square including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia as per ISI marked pipe. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 10 | Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia PVC plain bend as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 11 | Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia PVC plain Shoe as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 12 | Providing and fixing unplasticised - PVC pipe clips 50x50x50mm size (fifty into fifty into fifty milimeter)of approved design to unplasticised- rain water pipes hard wood plugs, complete 110 mm (one hundred ten milimeter) dia as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 13 | Providing and laying 10mm (Ten millimeters) thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco/Kajaria/cera or its equivalent double charged 600x600x10mm (Six hundred into six hundred into ten millimeters) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 15 | Applying priming coat on new concrete/ masonry/ asbestos cement plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand appearing as required with ready mixed primer complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 16 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 17 | Painting two coats(excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender