Tender for Tender for Construction Of A Community Building At The Government Degree College In Rabupura Gautam Buddha Nagar District Under The Accelerated Economic Development Scheme For The Financial Year 2025-26
Tender Value
16.89 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
2 days left
EMD
1.70 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Community Building At The Government Degree College In Rabupura Gautam Buddha Nagar District Under The Accelerated Economic Development Scheme For The Financial Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including up rooting of trunk vegetation grass bush wood trees and sapling of girth upto 30cm. Measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area clearedIncluding cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI.No. 2.31 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI.No. 2.8.1 |
| 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI.No. 2.35.3.1 |
| 4 | Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 2.27 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST.DSR SI no. 4.1.8 |
| 6 | Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No- 6.1.1 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in M-25(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No-5.1.2 |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : M-25 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Above Plinth Lvl as Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST.DSR SI No-5.2.2 |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with M-25 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No. 5.3 |
| 10 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI. No.- 5.22 B.1 |
| 11 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. as per SI-4.13 |
| 12 | Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 ( 1 cement : 4 coarse sand ) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI no 6.4.1 |
| 13 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In grantings, frames, guard bar, ladder, railing, brackets, gates and similar works. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI no. 10.25.2 |
| 14 | Providing and fixing M.S Tublar frames for doors,windows,ventilators and cupboard with rectangular/ L-type sections,made of 1.6mm thick required size, including fixing of necessary butt hinges and screws and apply a priming coat of approved steel primer. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI no. 10.15.1 |
| 15 | Providing and fixing decorative high pressure laminated sheet of plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhevive. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. as per drs 9.127.1 |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary. Extra for cutting rebate in flush door shutters. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No- 9.21.1 |
| 17 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge Door Chaukhat. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI- 14.2.1 |
| 18 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge Window Chaukhat. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI NO. - 14.2.2 |
| 19 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge Vent. Chaukhat. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI NO.- 14.2.3 |
| 20 | providing and fixing factory made uPVC glazed /wire mesh window / doors comprising of lead free uPVC multi- chambered frame,sash and mullion /coupler (where ever required ) extruded profiles having minimum wall thickness of 1.7mm for series R1 and R2 profiles and 2.1mm for series R3 and R4 profiles conforming to EN: 12608 in any shape ,colour and design , two track two panels sliding window with aluminium channel for roller, wool pile,nylon rollers with ss 304body, using R3 Series with frame. dsr no 9.147.A1.2 |
| 21 | 15 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Inner Side. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST.DSR IS 13.5.2 |
| 22 | 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Outer Side. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR IS 13.4.2 |
| 23 | 15 mm thick cement plaster of mix 1:4 ( 1 cement & 4 coarse sand )Below Plinth. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR IS NO.13.5.1 |
| 24 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No. 11.3.1 |
| 25 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing omplete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No-11.27 |
| 26 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No-11.20.1 |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR Sl no. -13.62.1 |
| 28 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST.DSR Sl no. -13.41.1 Two Coats |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR Sl no. -13.46.1 Two Coats |
| 30 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. as per DSR Sl no. -13.80 |
| 31 | Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No- 11.13.1 |
| 32 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies,terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS.2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.b)Laying bricks bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5(1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-Charge to required slope and trating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-Charge.d)Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. |
| 33 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) . (a) 250mm x 16mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI. NO. 9.62.1 |
| 34 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250mm x 10mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 9.63.1 |
| 35 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 125 mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 9.66.1 |
| 36 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI No- 14.34 |
| 37 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR SI NO- 12.41.2 |
| 38 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. -12.22 |
| 39 | Centering and shuttering including stutting, propping etc. and removal of form. Foundation. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO- 5.9.1 |
| 40 | Centering and shuttering including stutting, propping etc. and removal of form. Columns, pillars. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 5.9.6 |
| 41 | Centering and shuttering including stutting, propping etc. and removal of form. Beam /Band. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. - 5.9.21 |
| 42 | Centering and shuttering including stutting, propping etc. and removal of form. Slab. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO.- 5.9.20 |
| 43 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-17.1.1 |
| 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid . Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-17.2.1 |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require . (a) White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-17.7.4 |
| 46 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe (a) 32mm dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-17.28.1.1 |
| 47 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.65 |
| 48 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-17.16a |
| 49 | Providing and fixing C.P brass shower rose with 15 or 20mm inlet 150mm dia . good quality and make as approved by Engineer - in -charge. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 18.22.2 |
| 50 | Providing and fixing 600x450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cleats make as approved by Engineer - in -charge. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 17.31 |
| 51 | Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 100mm dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. UPPWD SOR, Ch-2 Item-15 (iv) |
| 52 | Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 75mm dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. Aligarh UPPWD SOR, Ch-2 Item-15 (ii) |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 32mm dia nominal dia pipes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.7.4 |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20mm dia nominal dia pipes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.8.2 |
| 55 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. (a) 15mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.21.2.1 |
| 56 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.49.1 |
| 57 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.50.1 |
| 58 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 (a) 15mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.53.1 |
| 59 | Providing and fixing gun metal gate valve with wheel of approved quality. (d) 32mm dia nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.17.2 |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-18.48 |
| 61 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. (a) Pipes 80mm to 300mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-2.10.1.2 |
| 62 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. (b) 150mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-19.1.2 |
| 63 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. (b) 150mm diameter S.W. Pipe. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-19.2.2 |
| 64 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 7.5 (i) For Sewer Line. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-19.7.1.1 |
| 65 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.10.1 |
| 66 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.14.2 |
| 67 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.14.3 |
| 68 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.14.10 |
| 69 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.31 |
| 70 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR No. 1.32 |
| 71 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 36 watt LED tube light on surface complete in all respect. - CAT-AAA. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 8.9.7 |
| 72 | Supply and fixing of recess/Surface/Pendent mounting round 12 Watt to 15Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT-AAA. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 8.2.3 |
| 73 | Supply and fixing of recess/ Surface/ Pendent mounting round 8 to 10 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.. CAT-AA. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 8.3.2 |
| 74 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 protection complete in all respect. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. CAT-AA. DSR No. 8.14.14 |
| 75 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 19.1 |
| 76 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.25 |
| 77 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.50.1 |
| 78 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 1.51 |
| 79 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 6 way (4 + 18), Double door. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 2.4.2 |
| 80 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 2.10.3 |
| 81 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 2.11 |
| 82 | Supplying and fixing of 63 Amp. 4 Pole MCB (10KA) \\"C\\" curve, CAT-A. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 2.15.3 |
| 83 | Supply and burring of Safe Earthing pipe 4.5m long ,40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and sait as required…all complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 5.2 |
| 84 | Supplying & Laying of 25mmx5mm G.I. Strip for earthing purpose as required complete in all respects. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR No. 5.90 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender