Tender For Work Of Modernization And Expansion Of Special Category Inspection Building Located At Matatila Dam In Lot 1, Lalitpur District.
Tender Value
1.49 Crore
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
2.99 Lakhs
Bank guarantee accepted
Document Fee
3770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lalitpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Modernization And Expansion Of Special Category Inspection Building Located At Matatila Dam In Lot 1, Lalitpur District.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation of foundation MKR & Kankar mixed soil including lead upto 30m and lift 1.50m including filling, watering, ramming of excavated earth removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30m from the work side. |
| 2 | Earthwork in MKR and kankar mixed soil in filling including lead upto 1.00km and lift 1.50m, dressing making profile, manual compaction all cost of labour T&P etc. complete as per directed by engineer in charge |
| 3 | Dismantaling of old & damage door and window, Wall i/c cost of all labour, T&P, lead upto 30m and lift 1.50m & disposal of Scrap material as directed by the engineer incharge upto a distance of 1.00 KM from the work site, all cost of labour, T&P etc complete.As per directed by Engineer- in - Charge. |
| 4 | Dismantaling of old & damage R.C.C Slab i/c cost of all labour, T&P, lead upto 30m and lift 1.50m & disposal of Scrap material as directed by the engineer incharge upto a distance of 1.00 KM from the work site, all cost of labour, T&P etc complete.As per directed by Engineer- in - Charge. |
| 5 | Dismentaling cement concrete and or granolithic floor, including base concrete and including material with a distance of 60 m As per directed by Engineer- in - Charge. |
| 6 | P/L coarse sand filling material i/c cost of all material, Labour, T&P etc complete directed by Engineer -in charge. |
| 7 | P/L 10cm thick cement concrete 1:2:4 over base concrete Laid in panels in making flooring i/c cost of all. |
| 8 | P/L 1:3:6 plain concrete in Foundation base including cost of all materials, labour and T&P etc As per direction by Engineer- in - Charge. |
| 9 | R.R.Stone masonry in 1:4 cement mortar room, wall and piller base i/c cost of all lead lift, material, labour, T&P etc complete directed by Engineer -in charge. |
| 10 | Ist Class-150 Brick work in 1:4 cement coarse sand mortar including all cost of labour, material T&P etc. complete. In all respect as per direction of Engineer- in Charge |
| 11 | Providing and laying reinforcement steel in Foundation and slab including all cost of labour material carriage cutting binding with GI wire and placing etc As per directed by Engineer- in - Charge . |
| 12 | Providing centering and shuttering including cast of all labour, material, T&P, lead, lift etc. complete as per directed by Engineer -in - Charge |
| 13 | Supplying and laying R.C.C. 1:1.5:3 in column including cost of all labour, material, T&P, lead, lift etc. complete as per directed by Engineer -in - Charge. |
| 14 | 12.5 mm thick plain /Coloured Plaster in 1:4 with cement, sand mortar on brick masnory i/c cost of all with cement slurry & pigment grouting Labour , Material, T&P etc. As directed by Engineer- in - Charge. |
| 15 | Cement pointing in 1:2 with cement sand mortar on stone masonary including all cost of labour, material,T&P , etc .as per direction of engineer-in -charge. |
| 16 | Providing and fixing (Door panneling) with Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick Door panneling as per direction of E/I charge. (For Door Pannaling) |
| 17 | Providing and fixing (Doors) with Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 35 mm thick as per direction of E/I charge.(For Fixing Door) |
| 18 | Providing and fixing (Doors Assessories) including Cost of all materials ISI Mark, labour T&P etc. required for proper completion of work as per direction of E/I charge. P/F Door Closer |
| 19 | P/F Door Closer in Common Bathroom Doors |
| 20 | P/F Doors lock |
| 21 | P/F Tower Bolt in doors |
| 22 | P/F Stopper in doors |
| 23 | P/F Buffer in doors |
| 24 | P/F Hinge in doors |
| 25 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.[Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly+A8 screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre)Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).] Material used fenesta make or its equivalent. |
| 26 | Providing And fixing aluminium frame with 5mm thick glass board i/c all cost of locks, rubber, handle door closer stopper, cleat angle, screws,snep beading of standard company and T&P labour etc. complete , as per direction by Engineer-in-Charge. (As Per S.E.IV th Circle Jhansi Letter No. 2798/S-82/IV/rate Dt 01/04/2024) |
| 27 | P/L 80 mm thick Interiocking concrete block pavement laid in stone dust base and fill joint with fine sand. joint filled after lavelling and dressing base including supply of all material, labour, T&P etc. requlred for proper completion of the work.as per direction by Engineer-in-Charge. |
| 28 | P/L 40 to 60 mm thick 1:2:4 in footh path floor base/brick egde foundation concrete cost of all materials, labour and T&P etc as per direction by Engineer-in-Charge. |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 30 | Providing and laying Vitrified tiles Kajaria, Somany and equailint.make in floor & wall in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily as per directed by the Engineer-in-Charge. |
| 31 | S/Laying mixture cowdung &good earth with all material labour T&P etc complete |
| 32 | Providing & fixing 15mm dia, Class B G.I. Pipe Tata, Jindal make for internal work complete with G.I. fitting clamps, i/c socket, tee, elbo, bend threading fixing with cost of material, labour, welding and Good the wall etc, complete.As per directed by Engineer- in - Charge. |
| 33 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 34 | Providing W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 35 | providing and fixing white vitreous china wash basin ISI marked including making all connections but excluding the cost of fittings : |
| 36 | White glazed fire clay sink 600x450x250mm of parry of equivalent make (24\\"x18\\"x10\\") |
| 37 | providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 38 | Providing and fixing PTMT towel rail ISI Marked complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 39 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes ISI Marked respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 40 | Providing 100mm P.V.C Pipe supreme 6kg/Cm2 i/c fitting complete. |
| 41 | Providing P.V.C Socket 100mm dia i/c fitting complete. |
| 42 | Providing P.V.C Bend 100mm dia i/c fitting complete. |
| 43 | 15mm dia C.P. Stop Cock heavyquallty ( Gem Mikadeo/Encess's williams of eqv.) i/c fitting complete. |
| 44 | 15 mm dia Fullway Gate Valve i/c fitting complete. |
| 45 | P/F Sawer of approved make i/c cost of all |
| 46 | Providing Bathroom set i/c cost of all |
| 47 | Supply and installing of low density pvc one piece moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. |
| 48 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 49 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 50 | Repairing and replacement of zindal/Tata Make 25mm dia Class B G.I. Pipe i/c threading fixing with bend, union elbo, socket etc with cost of material, labour, welding etc, complete. |
| 51 | P/F of Brass bib cock of approved quanity |
| 52 | Supplying & erecting prefabricated factory made decorative mild steel main gate of size 4.2m x 2.0m Angle size (75x75x8)mm MS flat black sheet size 2mm thick, 16mm sq bar for gril i/c all cost of material, labour T&P, fabrication charge etc. complete. .i/c cost of all complete in all respect. |
| 53 | P/F steel door/windows shutter with steel gril made of window/door fream Angle size (35x35x5)mm, sutter fream angle size (25x25x4)mm MS flat black sheet size 2mm thick, 10mm sq bar for gril i/c all cost of material, labour T&P, fabrication charge etc. complete. i/c all cost of material, labour T&P etc. complete. |
| 54 | Providing and fixing angle iron mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 55 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 56 | Supply and fixing of 20 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 4mm,top dia minimum150mm, bottom dia minimum 410mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 &.having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes,1.5 HP Power tool motor, 3 point suspension system with steel wire rope 8 mm dia , double drum winch. Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates,400w LED Flood light,Staff labour, machine for erection/shifting for tower etc Complete in all respect as per direction and satisfaction to the Engineerin-charge. |
| 57 | Supply & Fixing steel tubular pole 7 metre long designated 410 SP-1 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respect. |
| 58 | Supply & laying of aluminium conductor PVC insulated armoured sever sheathed cables 1100 volts grade at suitable size or as directed by the Engineer incharge complete in all respect. The earthconductor by clamps etc. |
| 59 | Supply & Fixing H.P.F Street light flourcent tube light fitting 40 Watt GI bracket complete in all respect Bajaj/phillips/crompton complete in all respect. |
| 60 | Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono /Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium /GIstructure of suitable strength with following components complete as required:- (B) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS14286/IEC61215, IS IEC61730-Part- 1, IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. P V modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not beless than 90% at the end of 10years and 80% at the end of 25 years. (C) Power Conditioning Unit (PCU) of 350-800 VDC Input voltager ange and 400V AC, three phase, 4 wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (D) Data Monitoring System complete with accessories (E) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (F) Lightning and surge voltage protection (G). Connections & Inter connections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, mainpower cable to grid supply PCU unit along with supplying & fixing of necessary channel / conduit lugs and other accessories etc. as required. |
| 61 | Supply and fixing phillips/havells make of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 and above protection complete in all respect. |
| 62 | Supply and fixingof factory wired, post top lanternsame as item no. 439(I) but with3meter longaluminiumpole complete in all respect As per nagar nigam work |
| 63 | Supplying and fixing of Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS Havells PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.As per direction of engineer-in-charge. |
| 64 | Supplying and fixing two module stepped type electronic Havells fan regulator on the existing plate switch box including connections but excluding modular plate etc.as required.As per direction of engineer-in-charge. |
| 65 | S/F 6 amp 5 pin havells socket outlet with i/cost of all fitting testing Complete as required .As per direction of engineer in charge. |
| 66 | Supplying and fixing 6 pin 16 amp Power socket outlet.with i/c all cost of fitting testing complete as required .As per direction of engineer in charge. |
| 67 | Supplying and fixing following Havells piano type switch. As per direction of engineer-in-charge. |
| 68 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core Havells cable in the existing surface/ recessed steel/ PVC conduit as required.As per direction of engineer-in-charge.(2x2.5 Sqm wire) |
| 69 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core Havells cable in the existing surface/ recessed steel/ PVC conduit as required.As per direction of engineer-in-charge.(2x1.5 Sqm wire) |
| 70 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core Havells cable in the existing surface/ recessed steel/ PVC conduit as required.As per direction of engineer-in-charge.(2x4 Sqm wire) |
| 71 | P/L App (Atactic Polypropylene Polymer) modified prefabricated five layer,3mm thick water proofing membrane, black finished reinforced with glass fiber matt consisting of a coat of bitumen primer for bitumen @ 0.40 litre/sqm by the same membrane manufactured of density at 25oC, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc. and preparing the surface complete. as directed by Engineer-in-charge.As per directed by Engineer- in - Charge. |
| 72 | Supply and errection of retro reflective sign boards having 2 mm thick alluminium sheet as sign substrtate facefully covered with 3 m scotchlite diamond grade retro reflective prismatic grade sheeting confirm to ASTM D-4956 type XI all letters legends and written matter will be computer cut using 3 m scotchlite elecrtro cut overlay film and processes with CAS system a per process recommend by original retro reflective sheeting manufacture. |
| 73 | Three seater sitting bench with Roof |
| 74 | Repairing/replacing fountain with 15no nozzle, 6 no 40 watt cloured LED flood light, G.I. pipe suitable size, gate valve, 2.5mm single core copper wire with 3HP motor fitting & other repair work complete. |
| 75 | S/F Dustbin stainless steel swing type ss pole hanging 100L capacity |
| 76 | Wall Panelling with providing and fixing in position wall panels of one side laminated phenol formaldehyde synthetic resin tiles over kail wood frame and provision for providing switch board fixtures etc.as per drawing complete with polishing and fining with French/wax polish aas per direction of E/I charge. |
| 77 | Providing and fixing (False Ceilling) with Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 (including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels. 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm cóc, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with ) [Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60] |
| 78 | Providing and fixing of 36 Watt to 46 watt surface mounting LED Square fitting having powder coated die cast alluminium housing body with extended heat sink and diffuser of polycarbonate material and driver set Complete in all respect (ISI Mark) |
| 79 | Providing and fixing of 12 Watt to 15 watt indoor rescess mounting LED Square fitting for Armstrong celling having powder coated ie cast alluminium housing body with extended heat sink and diffuser of polycarbonate material and driver set Complete in all respect (ISI Mark) |
| 80 | Providing and fixing of Profile light i/c Cost Of Material labour T&P etc with complete work (ISI Mark) as per direction of E/I charge. |
| 81 | Scraping old white or colour wash including disposal of refuse material as per direction of E/I charge. |
| 82 | Finishing wall with water proofing cement paint of approved manufacturers on uncoated wall surface(two coat) over one coat white cement primer including cost of curing , Labour, Material, T&P etc. for proper completion of work as per direction of E/I charge. |
| 83 | For interior surface Providing and applying two coat white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plasterded wall surface to prepare the surface even and smooth complete. including cost of all material, with prime coat ,labour , T&P etc complete As per directed by Engineer -in charge. |
| 84 | Two coat on old surface finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per 1S 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. T&P etc complete As per directed by Engineer -in charge. |
| 85 | Two coat asian ace on Finishing walls with Acrylic Smooth exterior paint of required shade : T&P etc complete As per directed by Engineer -in charge. |
| 86 | Painting with synthetic Enamel paint of approved brand and manufacture of required colour to given an even shade for old work T&P etc complete As per directed by Engineer -in charge. |
| 87 | French spirit Polishing on wood work with approved brand and manufacure labour T&P etc. required for proper completion of work as per direction of E/I charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender