Tender For Integrated Infrastructure Development And Environmental Safeguarding Of Processing Plant Zone At Rrp, Kurumbapet.
Tender Value
15.30 Crore
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
25.30 Lakhs
Bank guarantee accepted
Document Fee
1575
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pondicherry → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Integrated Infrastructure Development And Environmental Safeguarding Of Processing Plant Zone At Rrp, Kurumbapet.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jul-2026 | Corrigendum II | Date | 30-Jul-2026 |
| 2 | 21-Jul-2026 | Corrigendum I | Other | 30-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Code No. 2.8.1 Earth work in excavation by mechanical means means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil. |
| 2 | Code no:3.3 Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres) including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. |
| 3 | Code No. 4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 4 | Code No. 4.1.5 Providing and laying in position cement concrete excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) |
| 5 | Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1cement : 5coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 6 | Code No. 4.3.1 Centring and shuttering including strutting, propping etc. and removal of from for - foundations, footings, bases of columns etc. for mass concrete. |
| 7 | Code No. 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering,finishing and reinforcement -All work upto plinth level : 1:1.5:3 (1cement : 1.5 fine aggregate : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Code No. 5.2. Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement:1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 9 | Code No. 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete |
| 10 | Code No. 5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and catilevers |
| 11 | Code No. 5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts |
| 12 | Non - PSR Providing ,hoisting and fixing precast reinforced cement concrete in all works upto plinth level including the cost of required centring, shuttering, finishing with 6 mm thick cement plaster of min 1:3 (1 cement : 3 fine aggregrate) but excluding cost of reinforcement withcement concrete 1:1.5:3 (1 cement : 1.5 fine aggregrate : 3 graded stone aggregate 20mm nominal size) |
| 13 | Code No. 5.22.6 Steel reinforcement for R.C.C.work including straightening cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more |
| 14 | Code No. 5.23 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement : 3 fine aggregate) |
| 15 | Code No. 5.28 Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS : 1838 , including cost of m primer , sealing compound in expansion joints |
| 16 | CODE NO. 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement : 6 fine aggregate : 12 graded stone aggregate 20mm nominal size ) upto plinth level with - cement mortar 1:6 (1cement : 6 fine aggregate) |
| 17 | CODE NO. 7.2.1 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level including levelling up with cement concrete 1:6:12 (1cement : 6 fine aggregate : 12 graded stone aggregate 20mm nominal size ) upto plinth level with - cement mortar 1:6 (1 cement : 6 fine aggregate) |
| 18 | CODE NO. 10.25.1 Steel work welded in built up sections / framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required all complete |
| 19 | CODE NO.11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 20 | CODE NO. 13.16.1 6mm cement plaster of mix - 1:3 (1cement : 3 fine sand) |
| 21 | CODE NO. 13.46.1 Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm |
| 22 | CODE NO. 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
| 23 | CODE NO. 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.- in cement mortar |
| 24 | CODE NO. 15.3 Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. |
| 25 | CODE NO.: 20.2.5 Boring , providing and installing bored cast -in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring , with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc, by percussion drilling using direct mud circulation (DMC) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured upto bottom of pile cap) - 600 mm dia piles - Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used |
| 26 | Non - PSR Disposal of dismantled materials such as lime, moorum, gravel,surkhi, building rubbish and brick jelly to a lead of 2kms including incidental chages, loading and unloading charges complete. |
| 27 | Non - PSR Disposal of debries / surplus excavated earth including loading, unloading and conveyance to low lying areas with in 2km lead as directed by the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Jul 30, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender