Tender For Establishment Of Open Gym At Girls Hs Katra, District Reasi.
Tender Value
11.89 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
10 days left
EMD
23780
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Open Gym At Girls Hs Katra, District Reasi.
BOQ
| Sl. No. | Item Description |
| 1 | Labour engaged for dismantaling of old Inter locking tiles and stacking complete. Etc. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. |
| 5 | Providing & Filling of RBM (River Bed Material) on road surface, including watering and compacting with power road roller under optimum moisture conditions to give at least dry density incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot Finished welded type. |
| 11 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpetwashers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/Sqm |
| 12 | DOUBLE CROSS WALKERProviding and fixing of Double cross walker with specifications not lesser than: Dimensions (LxWxH): 1600 x 600 x 1600 mm Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Handle main frame of NB 50mm and other connecting pipes of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). Foot support frame of 96 x 46 x 3mm MS rectangular pipe. All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, UV resistant and colored. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. The equipment shall be fixed on ground with concrete of minimum strength M- 25 (to be paid separately) and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts shall be covered with base plate cover. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless-steel label shall be fixed on equipment for ease of use.Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 13 | TRIPLE TWISTERProviding and fixing of Triple twister with dimensions not lesser than: Dimensions (LxWxH): 1300 x 1300 x 1650 mm Shall be Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Handle Main frame of NB 32mm (G.I.) ‘C’ Class Pipe. Handle frame spokes of NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). Foothold plate of made of MS Sheet Metal of 3mm thickness. All Pipes shall be powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all the welding points prior to finishing. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. The equipment shall be fixed on ground with concrete of minimum strength M- 25(to be paid separately) and J shaped welded bolts of 18mm thickness & Base plate of 12 mm thickness. Once the concrete is set, the equipment shall be fixed on to it. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless-steel label shall be fixed on equipment for ease of use.Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 14 | DOUBLE PULL CHAIRProviding and fixing of Pull chair in a pair with specifications not lesser than: Dimensions (LxWxH): 2400 x 800 x 2000 mm Shall be Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Seat main frame of NB 50mm (G.I.) ‘C’ Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ‘C’ Class Pipe. Handle frame of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Handle bars to be provided with high end quality rubber grips. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated to be used used in the equipment manufactured. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. The equipment shall be fixed on ground with concrete of minimum strength M- 25 (to be paid separately) and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is to be fixed on to it and nuts and bolts to be covered with base plate cover. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label to be fixed on equipment for ease of use. Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 15 | SIT UP STATIONProviding and fixing of Double sit-up station with specifications not lesser than : Dimensions (LxWxH): 1600 x 1150 x 650mm shall be Fabricated with main frame of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Main frame of NB 25mm (G.I.) ‘C’ Class Pipe. Leg support of NB 65mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) Perforated MS Sheet for Back Support. The back support Fixed on its top is to be made of perforated MS sheet of 2mm thickness. All pipes shall be powder coated using Akzo Nobel or equivalent Paint of 80- 120 micron thick. All joints of pipes shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is to be applied at all welding points prior to finishing. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. The equipment is to be fixed on ground with concrete of minimum strength M- 25(to be paid separately) and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is to be fixed on to it. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless-steel label shall be fixed on equipment for ease of use. Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 16 | AIR SWINGProviding and fixing of Air swing in a pair with specifications not lesser than: Dimensions (LxWxH): 1150 x 900 x 1250 mm To be Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Leg Support frame of NB 50mm (G.I.) ‘C’ Class Pipe. Handle support frame of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) All Pipes shall be powder coated with 80–120-micron thick AkzoNobel or equivalent Paints.All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all the welding points prior to finishing. Handle bars shall be provided with high end quality rubber grips. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. Foothold made of MS Sheet Metal with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. The equipment shall be to be fitted with inbuilt limiters to prevent unwanted movements.The equipment is to be fixed on ground with concrete of minimum strength M- 25 ( to be paid separately) and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is to be fixed on to it and nuts and bolts shall be covered with base plate cover. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label fixed on equipment for ease of use Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 17 | LEG PRESSProviding and fixing leg press in a pair with specifications not lesser than : Dimensions (LxWxH): 2000 x 600 x 1800 mm Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. Foothold made of NB 50mm (G.I.) ‘C’ Class Pipe. Seats made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M- 25 (to be paid separately)and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts shall be covered with base plate cover. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label fixed on equipment for ease of use. Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 18 | Providing and fixing of Durable SBR TILE flooring Protects floor from damages by dumbbells and iron gym material Thickness:25 mm Dimensions: 490mm x 490mm SBR-25 SBR TILE of approved make and colour and as per directions of engineer in charge incl cost and carriage incl necessary jointing by cement concrete or adhesives including forming of at least 0.15m x 0.15m or above (width x thickness) block on all sides of tiles as per dierctions of engr incharge including all finishing in all the respects complete job . Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 19 | Providing and fixing of Xceed Treadmill of make Avon/ cosco of specification not lesser than: FT-XCD ,4 HP Heavy, Duty AC Motor,Incline Range:0% - 20% , Running Surface Area: 1530 mm X 580 mm, Speed Range: 1 - 20 km/hr or more .,Dims (in mm):2200 X 910 X1615, Max userWeight: 180 kg, Net Weight: 216 or more. Rates Inclusive of all Carriage, Taxes, Fixing & Maintenance of same upto 3 years as and when required. |
| 20 | Carriage of materials by mechanical transport av. lead up to 25 kms. including loading / unloading and stacking complete. Sand |
| 21 | Carriage of materials by mechanical transport av. lead up to 25 kms. including loading / unloading and stacking complete. Stone aggregates. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender