Tender For Establishment Of Community Library With Basic Facilities At Sangerwani Scheme : Tribal Ut Block : Ichgooze
Tender Value
19.80 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
6 days left
EMD
39600
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Community Library With Basic Facilities At Sangerwani Scheme : Tribal Ut Block : Ichgooze
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting. |
| 2 | Supplying and laying of stone soling / Plum hand packed tightly including ramming, watering including all leads & Lifts complete Job |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stoneaggregate 40mm nominal Size) |
| 4 | CAST-IN-SITUProviding and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | CEMENT CONCRETE (CAST-IN-SITU)Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting propping etc. and removal of form work; Foundations, footings, bases of columns, mass concreting. |
| 9 | Centering and shuttering including strutting propping etc. and removal of form work; Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) including Extra Brick Work in superstructure above plinth level upto Floor Five Level |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 14 | Providing and applying white cement based putty of specifed thickness of approved brand and manufacturer over the Plastered wall surface to prepare the surface even and Smooth complete: 2mm thickness |
| 15 | Providing wood work in frames of Doors,windows, clearstory window and other frames,wrought frames and fixed in position. Imported wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors,vwindows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). imported wood thickness of shutter in mm per sqm : 30 mm including 4mm thick float glass |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood Rate per sqm 30mm |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. 9.8.8.1 Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 19 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded, Truss work with Soffit etc ( truss & Grill work) |
| 22 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 23 | Providing Eaves 30cm wide & soffit 60 cm wide plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 Eaves 30cm wide & soffit 60 cm wide |
| 24 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm) |
| 25 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 26 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed. |
| 27 | Filling Nallah Mukh/Nallah Boulders under floors , including all leads and lifts ( Complete Job) |
| 28 | Link locks with L Drop |
| 29 | Towerbolts 100 mm |
| 30 | Handles 150mm |
| 31 | Water storage tank PVC tripple layer of apporved brand with all necessary fittings |
| 32 | Stain less steel bib cock long bnose |
| 33 | stain less steel heavy duty angle valve |
| 34 | PVC connection |
| 35 | P/F man hole cover with frame of brick work i/c polishing complete job |
| 36 | providing and fixing water closet squating pan indian type with 100 mm and pvc p or s trap 10 ltr low level pvc flushing |
| 37 | P/F 3 layer PPR pipes conforming to Is 15801 UV stablized and anti |
| 38 | External work including trenching, refilling etc PN 16 pipe 40 mm OD |
| 39 | P/F of PVC floor trap with jali |
| 40 | p/F soil waste pipes 10 mm dia Pvc B class 10 lenth |
| 41 | P/F of vent pipes 75 mm dia PVC B class |
| 42 | Carriage of different material from nearest source to site of work.Bricks by MT |
| 43 | Carriage of Sand by MT. |
| 44 | Carriage of aggregate by MT. |
| 45 | Providing and Fixing of RCC rings for soak pit & Lid 3' Dia including all leads and lifts |
| 46 | Provision for Cupboards / wooden/ Ply Boxes complete job as per directions of Engineer Incharge |
| 47 | Finishing walls with water proofing cement paint of required shade: (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 48 | Provision for electric conduits and Electric fittings, and other acessories necessary for electric fitting , Desighn charges , Photographs , Sighnboard , paint , other unforseen items etc to be paid as per actual as directed by Incharge Engineer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender