Tender For repair renovation Of Lwss Kiar Nallah To Teler In G.P. Telor Teshil Nerwa Distt Shimla (Hp)(Sh:-- Construction of Intake Chamber , S/Tanks , Repair Of Pump House And Providing Laying Of Gms Tube Of Various Dia. Etc.) Under Pdna
Tender Value
24.05 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
48116
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair renovation Of Lwss Kiar Nallah To Teler In G.P. Telor Teshil Nerwa Distt Shimla (Hp)(Sh:-- Construction of Intake Chamber , S/Tanks , Repair Of Pump House And Providing Laying Of Gms Tube Of Various Dia. Etc.) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. |
| 2 | Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts. (a)3mm to 6mm stone chips/Bajr |
| 3 | Manufacturing and fixing intake-cum- filter box 40x40x60 cm with M.S. sheet (2.00mm thick) by cutting and welding (two layers) including MS angle achors 45x45x5 mm at corners, catch trough 20 cm on one side of box with MS bar screens having mesh size not more than 5 mm, inside MS perforated sheet with holes not more than 5mm to support filter media (Media will be paid and measured separately). Providing outlet with G.I.pipe 65 mm dia GI nipple with suitable reducing socket and inside remove-able wire mesh strainer mesh size not more than 5mm, 25 mm dia G.I. socket for over-flow and scouring fixed with plug, complete with locking arrangement and handles for lifting including placing in position at site (earth work to be paid and measusred separately) with appoxy painting inside and outside as per design and drawing with all leads and lifts as per per direction and satisfaction of Engineer-in-charge. |
| 4 | Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work in :- a) Foundation and plinth. |
| 5 | Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 6 | foundation footing and bases of columns & like mass concrete. |
| 7 | Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 8 | Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:- with in all leads and lifts as per the directions of the Engineer in charge. |
| 9 | In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level |
| 10 | Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :- |
| 11 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like. |
| 12 | Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness. |
| 13 | Edge of slab and break in floor 20 cm wide |
| 14 | Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete |
| 15 | Steel work welded in built up sections, trusses and framed work including cutting hoisting Fixing in position and applying a priming coat of red lead paint :- |
| 16 | In trusses and trussed purlings in buildings. |
| 17 | 20 mm thick cement plasterin two coats , 15 mm and finisinhing coat 5 mm thick on rough side of brics/stone/concrete walls for interior plastering up to floor two level including arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 ( 1 cement : 6 sand ) |
| 18 | Providing and laying heavy duty precast cement conrete inter locking precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 45 mm thick inter locking blocks |
| 19 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters. |
| 20 | Supplying and Fixing woven plains G.I wire fencing of mesh 50mm to 150 mm to any type of standard rails ,strainging bolts etc. including provision of binding wire, staples etc. |
| 21 | Supplying of various materials for pump house.i)Tool Kit with all accessory etc.(ii) Bearing puller, insulation gloves & gress gen iii) Steel / C.I.chairs,Poly table |
| 22 | Providing and fixing G.I. Union testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. |
| 23 | 15mm dia (L) |
| 24 | 20mm dia (L) |
| 25 | 25mm dia (L) |
| 26 | 32mm dia (L) |
| 27 | 40mm dia (L) |
| 28 | 50mm dia (L) |
| 29 | White washing with lime on undecorated wall surfaces (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt dust mortor drops and other foreign matter. |
| 30 | Prov. and fixing GMS tubes of following dia in walls, floors , ventilating pipe/ over flow pipe etc. including tube fittings and making the wall, floors etc. good. i.e welding with one feets 25mm flat iran both side of req.pipes. (25mm-80mm) dia. |
| 31 | Providing & fixing cantrolling arrangement with( 25 to 65) mm dia wheel valve i/c all type of tube fitting compelete. |
| 32 | Painting two coats deco paint on RCC Work including cleaning all dirt, dust and other foreign matters other than white paint |
| 33 | Providing, Laying and jointing in trenches,galvanised mild steel tubes (Light grade)confirming to IS-1239 (Part-I) 2004 i/c tube fittings such as Tee, elbow, union & nipple.(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete. |
| 34 | 15 mm Dia (L) S/S |
| 35 | 20 mm Dia (L) S/S |
| 36 | 25 mm Dia (L) S/S |
| 37 | 32 mm Dia (L) S/S Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender