Tender For General Repair And Maintenance Work Of Government Buildings In Anupam Colony In Jaunpur District.
Tender Value
10.60 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
0 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General Repair And Maintenance Work Of Government Buildings In Anupam Colony In Jaunpur District.
BOQ
| Sl. No. | Item Description |
| 1 | Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Including all taxes, labour cess etc but excluding GST) As per DSR 13.88 |
| 2 | 12 mm cement plaster of mix : 1: 6 (1 cement : 6 coarse sand) (Including all taxes, labour cess etc but excluding GST) DSR-13.4.2 |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (Including all taxes, labour cess etc but excluding GST) DSR 9.21.1 |
| 4 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.(Including all taxes, labour cess etc but excluding GST) DSR 10.30.1 |
| 5 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. (Including all taxes, labour cess etc but excluding GST) DSR 10.25.1 |
| 6 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.(Including all taxes, labour cess etc but excluding GST) DSR 17.28.2.1 |
| 7 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. (Including all taxes, labour cess etc but excluding GST) DSR 17.31 |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Including all taxes, labour cess etc but excluding GST) DSR18.48 |
| 9 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (Including all taxes, labour cess etc but excluding GST) DSR 13.48.2 |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (Including all taxes, labour cess etc but excluding GST) DSR 13.82.2 |
| 11 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.43 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. (Including all taxes, labour cess etc but excluding GST) DSR 13.111.1 |
| 12 | Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm) . (Including all taxes, labour cess etc but excluding GST) DSR 11.37A |
| 13 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading (Including all taxes, labour cess etc but excluding GST) DSR 9.51.1 |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Including all taxes, labour cess etc but excluding GST) DSR 17.1.1 |
| 15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (Including all taxes, labour cess etc but excluding GST) DSR 17.10.1.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender