Tender For Construction Of New Building Of Buildingless Anganbari Kendra Silwar Khurd - 3 In C Us Of Upgraded High School, Silwarkhurd, Block - Sadar, District - Hazaribag
Tender Value
15.30 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
30603
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Building Of Buildingless Anganbari Kendra Silwar Khurd - 3 In C Us Of Upgraded High School, Silwarkhurd, Block - Sadar, District - Hazaribag
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levellings, ramming the foundation trenches, removing roots of trees,shrubs all complete job as per approved design, building specification and direction of E/I. (5.1.1) BCD |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I.(vide classification of soil item-B) (5.1.2) BCD |
| 3 | Providing clean coarse sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials,labour,royalty and taxes all complete job as per building specification and direction of E/I. (Mode of measurement compacted volume).(5.1.10) BCD |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete job as per building specification and direction of E/I. (5.6.1. BCD) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (5.3.1.2) BCD |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (5.3.1.1) BCD |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.3.9.1) BCDTie Beam |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) (5.3.10) BCDIn Column |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (5.3.11) BCDIn Lintel |
| 10 | Providing 75B brick work in C.M. (1:6) in Foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints,cost of screening materials, raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. (5.2.6) BCD |
| 11 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). (5.3.5) BCD |
| 12 | Providing 75B brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints,cost of screening materials, scaffolding, raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. (5.2.14) BCD |
| 13 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I. (5.6.7) BCD |
| 14 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat/square bar as per approved design and drawing, properly frabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (5.5.12) BCD |
| 15 | Providing Tor steel Reinforcement of 8 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.TMT Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.4 BCD) |
| 16 | Providing Tor steel Reinforcement of 10mm, 12mm & 16 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.(a) 10 mm TMT coil Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.5 (a) BCD) |
| 17 | Providing Tor steel Reinforcement of 10mm, 12mm & 16 mm dia rods as per approved design and drawing with cutting, bending, binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site)all complete job per building specification and direction of E/I.(c) 16 mm TMT coil Fe 500{only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (5.5.5 (c) BCD) |
| 18 | Providing 6mm thick C.P. (1:4) in ceiling with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.6) BCD |
| 19 | Providing 12mm thick C.P. (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.(5.7.3) BCD |
| 20 | Providing 12mm thick C.P. (1:3) with clean coarse sandof F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.1) BCD |
| 21 | Providing 12mm thick C.P. (1:4) with clean coarse sandof F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.2) BCD |
| 22 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes allcomplete as per building specification and direction of E/I. (5.8.24) BCD |
| 23 | Providing two coats of painting with ready mixed paint of approved shade and make over new steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I. (5.8.43) BCD |
| 24 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with verticle double channels 20 x 10 x 2mm at 100mm. Centres and braced with M.S flat diagonals 20X3 mm, with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete job as per building specification and direction of E/I.(5:5:14) BCD |
| 25 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13595 type A, including jointing with seal rings conforming to IS: 5382 leaving 10mm gap for termal expansion, (i) 110mm dia single socketed pipes. DSR 12.41.2 |
| 26 | Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40mm , including painting of fittings and brackets, cutting and making good the walls wherever required: kitchen sink without drain board 610x510 mm bowl deapth 200mm. DSR 17.10.2.2 |
| 27 | Providing 1.5 mm thick neat cement punning including curing, scaffolding, royalty and all taxes etc. complete job as per specification and direcition of E/l. (5.7.11)BCD |
| 28 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.BCD 5.5.29 |
| 29 | Providing and laying Rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make, in colours white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4(1 cement:4 course sand), jointing with grey cement slurry @ 3.3Kg/ sqm including grouting the joints with white cement and matching pigments etc. complete. DSR 11.39 |
| 30 | Providing and laying Rectified Glazed Ceramic wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in colours shades except burgundy, bottle green, black of any size as approved by E/I, laid on 20mm thick cement mortar 1:4(1 cement:4 course sand), jointing with grey cement slurry @ 3.3Kg/ sqm including grouting the joints with white cement and matching pigments etc. complete. DSR 11.31 |
| 31 | Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished, matchnine cut for kitchen platforms, vanity counters, window sills, facias and similliar locations of reqired size, approved shade and color and texture laid over 20mm thick base cement, mixed with matching pigments, epoxy touch ups, including rubbing, curing, all levels. granite stone slab clour back, cherry/rubby red, area of slab over 0.5 sqm. DSR 8.2.2.2 |
| 32 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. BCD 5.3.8 |
| 33 | Centering and shuttering including structing, propping etc. and its removal after use in foundatio as per specification and direction of E/I.(5:3:17.1) BCD |
| 34 | Centering and shuttering including structing, propping etc. and its removal after use in foundatio as per specification and direction of E/I.(5:3:17.5) BCD |
| 35 | Centering and shuttering including structing, propping etc. and its removal after use in foundatio as per specification and direction of E/I.(5:3:17.19) BCD |
| 36 | Centering and shuttering including structing, propping etc. and its removal after use in foundatio as per specification and direction of E/I.(5:3:17.3) BCD |
| 37 | Centering and shuttering including structing, propping etc. and its removal after use in foundatio as per specification and direction of E/I.(5:3:17.6) BCD |
| 38 | Earth filling in foundation trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) 5.1.7 BCD |
| 39 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \\"p\\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long with 10 lit. low level P.V.C. cistern D.W&S 3.2.1 |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20mm dia DSR 18.8 |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 32mm dia DSR 18.9 |
| 42 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I. DW&S 3.1.5.1 |
| 43 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) BCD 5.5.13 |
| 44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door -110mm DSR 12.42 |
| 45 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 DSR 12.42 |
| 46 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (plain)-110mm DSR 12.42 |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 48 | .Cost of carriage of materials : Cement |
| 49 | Sand : |
| 50 | Stone Chips : |
| 51 | Steel : |
| 52 | Bricks: |
| 53 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group B Energy -1.1.2 |
| 54 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire Energy -1.7.1 |
| 55 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire Energy -1.7.2 |
| 56 | Supplying and fixing PVC/metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75mmx75mmx50mm Energy -1.22.1 |
| 57 | Supplying and fixing PVC/ metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 72mmx146mmx48mm Energy -1.22.2 |
| 58 | Supplying and fixing PVC/ metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 121mmx173mmx48mm Energy -1.22.3 |
| 59 | Supplying and fixing piano type switch/socket on the existing switch box/cover including connections etc. as required. 5/6 amp switch Energy-1.23.1 |
| 60 | Supplying and fixing piano type switch/socket on the existing switch box/cover including connections etc. as required. 4 pin 5/6 amp socket outlet energy-1.23.4 |
| 61 | Supplying and fixing brass batten/angle holder including connection etc. as required. Energy-1.34 |
| 62 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.Energy-1.33 |
| 63 | Supply,Installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS 374/2019 , including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.1200mm (48'') ceiling fan Energy-9.4.1 |
| 64 | Supplying and fixing of exhaust fan -9'' (230mm) dia. Energy M-774 |
| 65 | Supplying and fixing of holder type LED -9/10 watt Energy M-855 |
| 66 | Cost of drilling 115mm/125mm deep bore well in all kind of soil and rock in rural area for installation of pump set with DTH rig all complete including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig matchine & other vechicles up to site of the work as per specification and direction of E/I.(a) up to 30m below GL DW&S M-1037 |
| 67 | (b) Beyond 30 m upto 60 m below GL DW&S M-1037 |
| 68 | Providing all equipment and labour for lowering 125mm dia UPVC casing pipes as casing for protecting the side from falling during the progress of milling all complete including carriage to work site M-1041 |
| 69 | Supplying labour cement and calcium chloride or bentonite solution and equipments for grouting to casting pipe M-1043 |
| 70 | Supplying all tools equipments and labour and doing washing, flushing and developing of drilled tube well to give clean and clear water all complete as per direction of E/I. M-1042 |
| 71 | Supplying labour and equipments including 125mm dia M.S cap and fiting and fixing over the tube well properly and taking it out as per direction of E/I. M-1044 |
| 72 | Supplying all tools labours equipments for lowering 32mm dia GI suspension pipe in 3m length in the drilling bore of tube well etc. all complete job as per dirfection of E/I. M-1051 |
| 73 | Supplying labour for fitting and fixing deep well cylinder jointing material, chrome leather bucket all tools and plan etc required for the job for low water level all complete job as per specification and direction of E/I. M-1052 |
| 74 | Providing all labour for fitting and fixing of india mark ii hand pump including sullplying all tools and plats etc as required for the job all complete as per directrion of E/I. M-1053 |
| 75 | Supplying and material labour and equipment for constructing PCC 1:2:4 circular platform arounf each drill tube well including 12mm thick cement plaster 1:4 with neat cement punning over exposed surface as per UNICEF design. Etc. all complete M-1045 |
| 76 | Supplying and material labour and equipment for constructing PCC 1:2:4 drain as per UNICEF design etc. all complete M-1046 |
| 77 | Cost of 1 nos ISI marked india mark ii hand pump confirming to IS 15500 (part -II)/2004 with amendment with all accessories including 8 nos, 12mm dia B.S connecting rod. M-1023 |
| 78 | Cost of 32mm dia GI pipe 3m long screwed at both ends with seamless socket as per IS 1239(part-II)/1990 M-1025 |
| 79 | Cost of 125mm dia blue UPVC casing pipe as per IS 12818-1392 M-1024 |
| 80 | Supplying fitting and fixing of KSB /Kirlosker/ CRI make 1.5 hp submersible pump set having head of 135m including all taxes royality etc all complete job as per direction of E/I. M-1055 |
| 81 | Supplying fitting and fixing of 5HP standard make starter panel board with arrangments of all necessary protection including all taxes rolatity etc all complete job as per direction of E/I. M-1065 |
| 82 | Supplying all tools labour equipment for lowering 32mm dia PVC pipe in 3 m length in the drilling bore of tube well etc. all complete job as per direction of E/I. DSR 18.9.4 |
| 83 | Add G.S.T ( Goods & Service Tax ) |
| 84 | Add Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender