Tender For Construction Of Barrier Free Toilet Phs Work Of Various Area ( Extension Block, 4 Storeyed Lawyer Chamber Ist Floor, 2Nd Floor, 3Rd Floor, 2 Storeyed Lawyer Ist Floor, Judical Record Room Ist Floor Chamber) At Punjab & Haryana High Court,
Tender Value
6.49 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
6 days left
EMD
12997
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Barrier Free Toilet Phs Work Of Various Area ( Extension Block, 4 Storeyed Lawyer Chamber Ist Floor, 2Nd Floor, 3Rd Floor, 2 Storeyed Lawyer Ist Floor, Judical Record Room Ist Floor Chamber) At Punjab & Haryana High Court, Sector-1, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, by mechinical / manual means ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: .2.10 |
| 2 | All kinds of soil .2.10.1 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1 |
| 4 | Pipes, cables etc, exceeding 80 mm dia. But not exceeding 300mm dia .2.10.1.2 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : .5.9 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Shelves (Cast in situ) -- Wash Basin Shelves .5.9.4 |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. .6.13 |
| 8 | Cement mortar 1:4 (1 cement :4 coarse sand) .6.13.2 |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7 |
| 10 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap .17.7.4 |
| 11 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 13 | Semi rigid pipe .17.28.1 |
| 14 | 32 mm dia .17.28.1.1 |
| 15 | Providing and fixing soil, waste and vent pipes : .17.35 |
| 16 | 100 mm dia .17.35.1 |
| 17 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2 |
| 18 | 75 mm diameter : .17.35.2 |
| 19 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 .17.35.2.2 |
| 20 | Providing and fixing plain bend of required degree. .17.39 |
| 21 | 100 mm dia .17.39.1 |
| 22 | Sand Cast Iron S&S as Per IS - 3989 .17.39.1.2 |
| 23 | Providing and fixing heel rest sanitary bend .17.40 |
| 24 | 100 mm dia .17.40.1 |
| 25 | Sand cast iron S&S as per IS:3989 .17.40.1.2 |
| 26 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. .17.43 |
| 27 | 100x100x100 mm .17.43.1 |
| 28 | Sand cast iron S&S as per IS - 3989 .17.43.1.2 |
| 29 | 75x75x75 mm .17.43.2 |
| 30 | Sand cast iron S&S as per IS - 3989 .17.43.2.2 |
| 31 | Providing and fixing terminal Gaurd : .17.56 |
| 32 | 100 mm .17.56.1 |
| 33 | Sand Cast Iron S&S as Per IS - 3989 .17.56.1.2 |
| 34 | 75 mm .17.56.2 |
| 35 | Sand Cast Iron S&S as Per IS - 3989 .17.56.2.2 |
| 36 | Providing and fixing collar : .17.57 |
| 37 | 100 mm .17.57.1 |
| 38 | Sand Cast Iron S&S as Per IS - 3989 .17.57.1.2 |
| 39 | 75 mm .17.57.2 |
| 40 | Sand Cast Iron S&S as Per IS - 3989 .17.57.2.2 |
| 41 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58 |
| 42 | 100 mm .17.58.1 |
| 43 | 75 mm .17.58.2 |
| 44 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60 |
| 45 | 100 mm inlet and 75 mm outlet .17.60.2 |
| 46 | Sand cast iron S&S as per IS - 3989 .17.60.2.1 |
| 47 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. .18.10 |
| 48 | Internal work - Exposed on wall . |
| 49 | 15 mm dia nominal bore .18.10.1 |
| 50 | 20 mm dia nominal bore .18.10.2 |
| 51 | 20 mm dia nominal bore .18.10.3 |
| 52 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : .18.17 |
| 53 | 25 mm nominal bore .18.17.1 |
| 54 | Providing and fixing ball valve (brass) of approved quality, High or Low Pressure, with plastic foats complete pressure, with plastic floats complete .18.18 |
| 55 | 25mm nominal bore .18.18.3 |
| 56 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 57 | 45 cm length .18.21.2 |
| 58 | 15 mm nominal bore .18.21.2.1 |
| 59 | Painting G.I pipes and fittings with synthetic enamel white paint with two coats cover at ready mixed priming coat, both of approved quality for new work: .18.38 |
| 60 | 15mm dia Pipe .18.38.1 |
| 61 | 20mm dia Pipe .18.38.2 |
| 62 | 25mm dia Pipe .18.38.3 |
| 63 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) .18.46 |
| 64 | 15 mm nominal bore .18.46.1 |
| 65 | 20 mm nominal bore .18.46.2 |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 67 | Cutting holes up to 30x30 cm in walls including making good the same: .18.76 |
| 68 | With common burnt clay F.P.S. (non modular) bricks .18.76.1 |
| 69 | Core cutting holes up to 15x15cm in RCC floor and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof. .18.77 |
| 70 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. .18.78 |
| 71 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4 |
| 72 | 100x100 mm size P type .19.4.1 |
| 73 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: .19.30 |
| 74 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : .19.30.3 |
| 75 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.30.3.1 |
| 76 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. .22.5 |
| 77 | Providing and fixing in position wall mounted european style white vitreous EWC of Hindware and other necessary fitting required to make the item functional complete in all respect and to the entire satisfaction of Engineer in Charge .NSR |
| 78 | Providing and fixing of Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook make Jaquar model no.ALD-565 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 79 | Providing and fixing Pressmatic Pillar Cock Auto closing system make Jaquar model no. PRS-CHR-031 or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 80 | Providing and fixing of Angular Stop Cock with Wall Flange make Jaquar model no. COP-CHR-057PM or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 81 | Providing and fixing of Soap Dispenser with Glass bottle make Jaquar model no. CAN-CHR-1135N or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 82 | Providing and fixing of Hand dryer make JAL/Viking complete in all respect to the entire satisfaction of EIC .NSR |
| 83 | Providing and Fixing superior quality mirror with bevelled edge (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. .NSR |
| 84 | Providing and fixing of Toilet Roll Holder with Stainless Steel Flap make Jaquar model no. ACN-CHR-1151N or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 85 | Providing and fixing C.P Bib Cock with wall flange of make Jaquar model no. COP-CHR-037NPM or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 86 | Providing and fixing Regular Body of Concealed Stop Cock Cold Only Suitable for 15mm Pipe line with Protection Cap and Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal of make Jaquar model no. ALD-CHR-083R, FUS-CHR-29083K or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge.satisfaction of the Architect & Engineer in charge .NSR |
| 87 | Providing and fixing Single Piece Slim Concealed Cistern Body with Installation Kit & “S-Type” drain pipe connection set for Wall Hung WC (with Flush Control Plate) of make Jaquar model no. JCS-WHT-2400S, JCP-CHR-392415 or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 88 | Providing and fixing of C.P. towel ring of make Jaquar model no. ACN-CHR-1121BN or equivalent model of make: Cera/ Hindware or approved make as per approved make list complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 89 | Providing and fixing S.S. 304 grab rail complete in all respect make as approved make list .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender