Tender For Construction Of Indoor Sports Hall Stadium At Sunam District Sangrur (External & Specialized Electrical Services)
Tender Value
1.37 Crore
Estimated cost
Bid Submission
23 Jul 2026
2 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sangrur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Indoor Sports Hall Stadium At Sunam District Sangrur (External & Specialized Electrical Services)
BOQ
| Sl. No. | Item Description |
| 1 | Providing CCTV System |
| 2 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 3 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 4 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 5 | COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: |
| 6 | Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 7 | CAT 6 LAN cable |
| 8 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Rugged Dome/ Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944), Max Frame Rate: 50fps or better, Quad stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux @ F1.6 (color); 0 Lux IR On, Smart IR with upto 40m IR distance or better, Auto ICR (Infrared Cut Filter), 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000s; Advance Video Compression technology such as H.265 & H.264 High Profile & MJPEG, Streams: 4, Video Streams configurable at different Resolutions and FPS Max@50FPS, 2.8 mm, Fixed, F1.4, Electronic Image Stabilization with G-Sensor, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence. Protocols: IPv4, IPv6, TCP/IP, HTTP, HTTPS, RTSP/RTP/RTCP, IGMP/Multicast, SMTP, SNMP, DHCP, NTP, DNS, DDNS, CoS, QoS, 802.1X, UPnP, mDNS (Bonjour), UDP, ICMP, ARP, TLS, SFTP. Video Analytics Server feature: Motion Detection, Scene Change, Tamper Detection, Smart Motion, Intrusion, Loitering, Line Crossing Detection, Unattended Object Detection, Missing Object Detection, People Counter, Queuing, Crowd Gathering, Heat Map, Face Detection, camera reset option in camera, 5 Privacy Mask, 6 Region of Interest, Defog, TLS 1.2 & 1.3, AES-128/256, SSH/Telnet closed, Stream Encryption, Secure boot, Prevent brute-force attack, 2TB Micro SD/SDHC/SDXC card slot. Gore Vent, PoE (802.3 af) and 12V DC, Max 10.6 W or better, IP66 & IP67, IK10 vandal proof with Aluminium + Polycarbonate Housing, Having Operating temp range: -30°C ~ 60°C. Certifications: ONVIF Profile S, G, T, M compliant (can be verified from ONVIF website, T profile must have secure streaming), UL, FCC, CE, RoHS, BIS-ER, STQC complied & NDAA Section 889 compliant. Camera should be with five year warranty. The MAF and warranty should be submitted by OEM directly, complete in all respect as per instruction of engineer in-charge. |
| 9 | Supply,erection, testing & commissioning of 32 Channel Linux based Recording server (Network Video Recorder shall be support The STQC Cameras),4SATA interface,Upto 32 channel Video Inputs, Server shall have through put of incoming bandwidth 512 Mbps & outgoing 512 Mbps, 2*HDMI ,1*VGA Video output. Support slive view,storage,and playback at 1-8 MP resolution,Shall be capable of live streaming & Storing 32 cameras,Shall support Net HDD, Storage upto 8 TB Surveillance HDD,Shall support audio,G.711A/G.711U,Shall support 1E-sata port,2xRJ45 10M/100M/1000M ports,Audio input 1 channel, Audio Output 1 channel output ,Alarm input 16 channel,Alarm Output 1channel output,USB2.0*1, USB3.0*1+USB2.0*1port ,RS485*1,Protocol :IPv4, IPv6,TCP/IP,HTTP, HTTPS, DDNS,RTMP SMTP(SSL), SNMP, DHCP, PPPoE, UPnP,NTP, P2P, FTP , Simultaneously record multiple streams in any combination of H.264/H.265/H.264+/H.265+, support Start,stop,normal play,backplay, frame by frame forward, full screen,Fast forward/backward(2x,4x,8x,16x),Slow forward(1/2x,1/4x,1/8x,1/16x),Addcustom/DefaultTag for any events at the time of playback, digital zoom,video clip,sub stream/main-stream,play back video bar,Shall be able to take actions pre and post recording,Send email,show message, send email,FTP upload video or screenshot,Cloud upload video or screenshot, fullscreen,voice prompts,Alarm output trigger,PTZ linkage on events, support the display of VCA metadata on video live-view and and playback, Supports AI from camera side:Face Detection,Human Detection,Vehicle Detection,Perimeter Intrusion Detection,Line Crossing Detection,Cross Counting, Heat Map,Crowd Density Detection,Queue Length Detection,License Plate Detection, Rare Sound Detection,Stationary Object Detection, Sound Detection, Capable to show statistics and graphs of events for different interval of time search,Shall support S.M.A.R.THDD function for HDD status,Onvif Support ,Power Supply :DC 12V/2A,Consumption without HDD:12W, Temperature:-10°C~+50°C(14°F~122°F)Humidity:Less than 90%RH, 378*326*66mm(W×D×H) Dimensions ,Certificates:CE, BIS, FCC, ROHS and REACH complete in all respects as approved and desired by the Engineer-in-charge at site. |
| 10 | SUPPLY &ERECTION of 6000GB Audio Video HDD 3.5 Inches Connector SATA, Interface SATA, Operating Temperature 0°C to 65°C, Transfer Rate minimum 160MB/s, Recording Technology – CMR, Certifications BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL for NVR recording and playback complete in all respect as desired by the engineer in charge at site |
| 11 | SITC of 24 Port POE 190+ Watts L2 managed 10/100/1000 Mbps with 4 No Uplinks RJ45 and SFP Combo 1G Ports Data switch with 4• IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy-Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50GbpsData Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), PoE Standards • IEEE 802.3af • IEEE 802.3at PoE-capable Ports • Ports 1 to 4 Power 60W • 190+ W (30 W max. per PoE port). CPU RAM 256MB or above, Certification - FCC class A, CE class A, VCCI, BSMI, CCC,CE, LVD, UL, CBOper Temp--5 to 50 °C (23 to 122 °F) complete in all respects as approved and desired by the Engineer-in-charge at site. |
| 12 | Supply &erection of Smart 55” LED Commercial Panel /Regular with 2 HDMI Port, TV Input, 3 Years Warranty, 2 HDMI Port, TV Input, 3 Years Warranty, Resolution 4K, Brightness 300 cd/m2 Support 4K Ultra HD 20 Watt 2.0 Audio Output Web Browser Soft AP, WiFi (bandwidth) Screen Share (Miracast) Samsung TV Plus App USB Cloning, 2 No. Of HDMI Port 2 no USB Port complete in all respect as desired by the engineer in charge at site |
| 13 | Supply & Erection of 2 meter long superior quality 4K HDMI Cable having speed upto 10gbps support all types of HDMI Devices complete in all respect as desired by the engineer in charge at site. |
| 14 | Supply & Erection of RJ-45 Male connector including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 15 | Supply & erection of 9U Wall mount 19’’ Rack with glass door,lock& key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks.complete in all respect as desired by the engineer in charge at site. |
| 16 | Supply &erection of 1000VA LIT UPS/ Power Plant with SMF batteries having 30 Minutes backup time, Cold Start, 3 No. plug Indian style, Automatic Voltage Controller, Overload protection, Over charging Protection, 2 No. 12v 7Ah Batteries, Wide Input Range, Fan Less Cooling system, Transfer time less than 8ms,Audible Alarm etc. complete in all respect as desired by the engineer in charge at site. |
| 17 | Providing PA System (Sound System) in Indoor Sports Hall |
| 18 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 19 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 20 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 21 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: |
| 22 | Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 23 | Overall size 1.5sq.mm (48/0.20mm), 2Core |
| 24 | Supply & Erection of Advanced PA Amplifier with Built-in-Digital Player System comprises of following features:-● 220V AC & 12V DC operation● 700 watt PA Amplifier● 6 Mic & 2 Aux input● MP3 Recorder & player● USB & Card Reader● Remote control● Intelligent sound reinforcement● Speaker output @ 4Ω 8 Ω & 70V /100V● Active Bass & Treble Control● LED Display with Multimedia control including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 25 | Supply, Installation, Testing and Commissioning of 60 Watt WAll Speaker 100V Line Support Woofer 163mm (6½”), Tweeter 25mm (1”), Easy power tap selection through a slotted rotary switch knob at the rear. power taps of 60W, 40W, 30W, 20W &10W. Frequency Response 50-20,000Hz including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 26 | Supply, Erection, Testing and Commissioning of 16 ZONE Selector Having following features:-● 16 Zone Selector Switcher.● All Call feature● 230V AC Inbuilt Power Supply.● LED Indication.● 19’’ Rack mountable● Amplifier Input● 100Vincluding warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 27 | Supply & Erection of 18” Gooseneck Microphone with stand having on/off switch and 10 meter long Twin core shielded low noise with XLR connector including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 28 | Supply & Erection of VHF/UHF wireless Microphone with battery on/off switch long Range Remote base unit and Adaptor including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 29 | Supply & Erection of 15U 19’’ Rack with glass door, lock & key facility minimum 400mm depth. with CPD, Cable Manager & Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site. |
| 30 | Providing Early Streamer Emission Lightning Arrestor System |
| 31 | Supply, erection, testing & commisioning of Early Streamer Emission (ESE) type Lightning Protection Complete with Lightning AirTerminal. The System should be corrosion resistant stainless steel chrome body capable of working in hazardous atmosphere and protecting against direct Lightning point as well conducting /diverting it to earth completelyafter tracing the Lightning in advance. As per NF C 17-102:2011 the air terminal should be tested for Lightning impulse current (10/350 micro sec) =100 KA and forlocal certification the airterminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shall offer a protection radius of 79mtr., Level-1 High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. (Its working principle evolves from local electrostatic field that develops naturally around the system as a thunderstorm begins to gather. In the event of descending lightning, an inbuilt triggering device generates high tension pulses at the conductor tip, causing a ‘corona effect’.) Protection radius of 79Mtr at level 1 & 107 Mtr at level 4 |
| 32 | Supply and fixing of GI Mast 5 mtr. height along with suitable base plate for mounting the terminal along with highly insulated adopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector/Connecting point in such a waythe top portion shall be electricallyconnected to the central tip of the ESE terminal and bottom portion connected to the down conducto, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required. |
| 33 | Supply and installation of Lightning Strike Counter (6 digit display) of non-resettable (electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system. This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures. It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs. above the ground level. |
| 34 | Supply & erection of test Link of non-corroding, weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 Nos. of insulated supports with suitable holes prefitted nuts & bolts to fixthe down conductor& earth wire. The transparent coverfitted at approximately500-1000mm from ground level shall be provided on each down conductor complete in all respect as approved and desired by the Engineer in-charges at site. |
| 35 | Supply, installation & testing of chemical earthing (Maintenance Free Earthing) system with ULapproved copper bonded rod and exothermically welded copper busbar both tested by CPRI at 50kA Fault Current. A copper bonded steel rod shall have 3000 mm length and 17.2 mm dia. with copper coating thickness of minimum 250 microns. Along with earth enhancement compound tested byROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A copper clad steel solid ground wire of 8 mm dia. for interconnecting earth pits. Each earth pit shall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber. The grounding minerals should not be pollute the ground water. The grounding minerals shall be tested & certified for the resistivity of less than 0.12 ohm-mtr. |
| 36 | Cost of pole foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20,Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge. |
| 37 | PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: |
| 38 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 39 | Overall size 70sq.mm (Un-sheathed) (Conducter connected the air terminal to earthing) |
| 40 | Providing Solar Power Generation System 5KW |
| 41 | Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 5KWp including required quantities of SPV modules (High power density Monocrystalline based single module iof capacity+500W) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Chemical copper bonded rods (i.e. 1 Nos. GI Structure, 2Nos. for String Inverter, AC & DC Distribution System)Provsion of Lighting arrester and 2 Nos. G.I. chemical earthing with copper bonded rods. Hot Dip Galvanized MS Mounting Structure be Designed to with stand the Speed for the Wind Zone of the Location(Rated Wind Speed 150-170Kph) Complete with transportaion, fabrication, labour & Civil Work. |
| 42 | Features:- 1). Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 1&2 IS/ IEC 61701 & IS/IEC 14286 & IEC 61215, BIS Certificates & MNRE, GOI latest specifications / Standards.2). Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1,IEC / EN 62102-2 , EN 61000-6-2, EN61000-6-3, IEC61683, EN 50530 , IEC 60068-2-1,2,14,30,EN 60529, IES 60947 Part 1,2,3 IS 60947 Part 1&2 , IES 60227/IS 694,IES 60502/IS 1554 BIS Certificates & MNRE, GOI latest specifications / Standards.3). Structure : 25 Years Service Life with AMC & Certified under IS 2062:20114). Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) 5). Annual Maintenance Contarct for the period of 10 Years Conditions:- 1). The Plant will be installed as per MNRE and GOI guidelines specifications. (Detail of Material as per Annxeure -1 Attached) 2). The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) Contractors.PWD enlisted contractor subject to condition that PWD Enlisted contractor will get work done from MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) approved Conractors.#The Rates are inclusive of Bi-directional meter testing charges, PSPCL Connection Charges, Unidirectional meter cost and all type of taxes including GST#The capacity of solar power plant my increase or decrees as availability of site it can also be totally removed from executive end. |
| 43 | Providing 20Mtr High Mast in Athletic Ground |
| 44 | Supply and erection of Hot dip galvanised, polygonal sports high mast with Fixed Head Gear Frame suitable for mounting 20 Nos. of 500W LED Flood Lights as required. The height of the mast from base upto top of head frame shall be 20.0 Mtrs. The mast has been designed with Fixed Head Frame shaft shall be structurally suitable to accommodate the requisite flood lights asymmetrical Distribution. with 15 degree Angle and considering base wind speed as per IS 875. High Mast Should Support Manrider Unit as per item no.78. The Soil Bearing Capacity is 10 T/m² at 2.5Mtr Below G.L and Density of Soil 1.44 T/m³, It should be the responsibility of the contractor to get the soil tested from authentic laboratory. All the Specifications and Safety Parameters complete in all respect as approved and desired by the Engineer-In-Charge at site. |
| 45 | (A) Specifications |
| 46 | Height of mast:- 20 Mtr Max |
| 47 | No of section:- Two Section |
| 48 | Length of Bottom Section:- 8-12 Mtr Minimum |
| 49 | Material Construciton:- ASTM A572 Grade 50/ BSEN 10025 5335 |
| 50 | Base dia and top diameter:- Base 610mm , Top 300mm (min) |
| 51 | Plae thickness:- Bottom 6mm, Top 5mm |
| 52 | Cross section of mast:- 20 side polygon |
| 53 | Standard of galvansation:- ASTM A 123/ISO 1461 |
| 54 | Thickness of base plate:- 30mm minimum |
| 55 | Lightining protection final:- G.I single spike of length 1200 mm Minimum |
| 56 | Base wind speed as per IS 875:- As per IS:875/ 180Km/Hr |
| 57 | Number of foundation bolts:- 12 Nos. |
| 58 | PCD of foundation bolts:- 740 mm Miniumum |
| 59 | Type/ Diameter/ Length of foundation bolts:- TS 600/30mm dia/minumum 1200 mm long |
| 60 | Steel grade:- BSEN-10025with tenslle strength 355N/Sqm/ASTM A572 |
| 61 | Thickness of Galvanization:- 85 Microns Minimum |
| 62 | Diameter of Baseplate:-Minimum 840mm |
| 63 | Size of Door Opening at Base of Mast:- 1200mmX300mm |
| 64 | (B) LANTERN CARRIAGE |
| 65 | Material of Construciton:- 40/50 NB ERW Class B- M.S.Pipe/ ICMC Channel |
| 66 | Hight/ LANTERN CARRIAGE:- 3000mm Min |
| 67 | No of Luminaries:- 20 Nos. minimum |
| 68 | Type:- Asymmetrical |
| 69 | (C) CONTROL CABLE |
| 70 | Cable for supply:- Copper Conductor, 6.0 sq mm 5 core maximum |
| 71 | Insulation/sheathed:- EPR Insulated & PCP sheathed/ PVC |
| 72 | No of cables/ circuits per mast:- 1 No (3phase) flexible tpe multicore |
| 73 | (E) STAINLESS STEEL WIRE ROPE |
| 74 | Grade/ construction:- ASIS 316,7/19,SS 316,7/19 construction tested from IIT |
| 75 | Number of Ropes:- 3 Nos |
| 76 | Diametre of Rope (mm):- 8 mm dia |
| 77 | Breaking load capacity of rope:- Minumum 3250 Kg per SS wire rope |
| 78 | Supply and erection of Manrider Unit suitable for 20 meter height pole made up of Steel Frame with Special Designed winch with Safety Rope Feature and Power Tool-with motorized as well as manual operation with Safe Load Capacity of 300KG with lifting Speed 4m/minute. The Manrider unit must have Security lock & overload protection switch NSR The Lift must decend if there is no power and magnetic brake would be applied immediately. The Manrider system shall be Independent unit with inbuilt Winch accessories with Remote facility for operations of Manrider, Manrider must have anti fall arresting system with independent safety wire rope of min 6 mm as per IS 2266.The breaking System comes into operation immediately when the wire rope failure. It must decend manual even when there is no power for the safety of workman.The safety lock must be Trigger on sudden increase of decending speed. The Manrider Supplied Complete with all accessories for Motorized as well as Manual Operations (3PH- Electric motor Rating: min 2HP, Double Drum Winch: min 750kg, Torque Limiter, Motor & Winch Mounting Brackets, Counter Weight Assembly, Control Panel with Raising Lowering & Push Button. Commplete in all respect as approved and desired by the Engineer-In-Charge at site, in charge |
| 79 | Casting of suitable open raft type shallow foundation with M-25 cement concrete and steel reinforcement for 20 Mtr. High mast.The Cost of Soil testing in contractor Scope.The rate includes excavation, filling with M-25 cement concrete including disposal of waste material complete with finishing to the satisfaction of Engineer-in charge.Making Reniforced Cement Concrete Foundation of size 1200mmX1200mmX2400mm for 20 Mtr. High Mast Pole including Earth work in excavation 4100mmX4100mmX2600mm=43.71 cum, Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) complete 4X4100mmX100mm = 1.64 sqm,Providing/Laying of cement concrete 1:4:8 with brick/stone complete 4100mmX4100mmX100mm =1.68 cum, Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. Complete 4X4100mmX400mm =6.56 sqm, Providing/Laying reniforced cement concrete M25 (4100mmX4100mmX400mm) = 6.72 cum, Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. Complete 4X1200mmX2400mm = 11.52 sqm, Providing/ Laying reniforced cement concrete M25 (1200mmX1200mmX2400mm) =3.46 cum, Providing/Laying of cold twisted deformed bar FE-500 = 7.08 Qtl.(Approx) Complete in all respect as per drawing supplied by the pole manufacturer. |
| 80 | MINIATURE CIRCUIT BREAKERS: |
| 81 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 82 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 83 | MCB Triple Pole 40amp. (10kA, Curve-C) |
| 84 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 85 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: |
| 86 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 87 | TP&N Horizontal Double Door Distribution Board 8 way each |
| 88 | SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: |
| 89 | CUBICAL PEDESTAL: |
| 90 | Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4\\" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:- |
| 91 | Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm |
| 92 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: |
| 93 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 94 | Overall size 2.5sq.mm (50/0.25mm), 3Core |
| 95 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 96 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 97 | Overall size 16sq.mm (4 Core) Un-armoured (Loose) |
| 98 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: |
| 99 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 100 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 101 | 8 SWG COPPER EARTHING : |
| 102 | Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation: |
| 103 | Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long |
| 104 | COPPER EARTHING (Upto 14 metre in Length): |
| 105 | Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 106 | Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) |
| 107 | Supply and erection of LED Flood Light 500watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 108 | Supply and erection of LED type single dome aviation obstruction light with LED lamps on the existing 20 meter High Mast pole complete in all respect as approved and desired by the Engineer-In-Charge at site. |
| 109 | Providing Campus Lighting/ Security Lighting |
| 110 | GI PIPE POLES: |
| 111 | Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- |
| 112 | G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm. |
| 113 | SINGLE ARM BRACKETS FOR GI PIPE POLE: |
| 114 | Supply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:- |
| 115 | Single Arm Bracket 1 metre Long with G.I. Reducer 80mm x 40mm |
| 116 | GALVANIZED IRON PIPES AND G.I. EARTHING |
| 117 | Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- |
| 118 | GI Earth rod 20 mm dia., 3 mtr. Long |
| 119 | Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- |
| 120 | SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement |
| 121 | CEMENT CONCRETE MUFFS: |
| 122 | Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in-Charge at site:- |
| 123 | Cement Concrete Muff of Overall Size 450mm dia., 60cm Long |
| 124 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 125 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 126 | Overall size 1.5sq.mm (Un-sheathed) |
| 127 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 128 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 129 | Overall size 16sq.mm (4Core) Un-armoured (Loose) |
| 130 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: |
| 131 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 132 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 133 | MCCB's (MOULDED CASE CIRCUIT BREAKER): |
| 134 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- |
| 135 | MCCB Four Pole 40/63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting |
| 136 | MS SHEET ENCLOSURE FOR MCCB's: |
| 137 | Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- |
| 138 | MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm) |
| 139 | SHEET METAL BUS BAR CHAMBERS (COPPER STRIPS): |
| 140 | Supply and erection of sheet metal bus-bar chamber (factory fabricated) duly powder coated on existing surface with required 4Nos. of tin plated copper bus-bar strips of suitable length and cross-sectional area mounted on DMC/ SMC moulds at sufficient distance, enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/ rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site:- |
| 141 | Bus Bar Chamber 63amp., 415volts Overall Dimensions (350mm x 450mm x 150mm) nominal |
| 142 | TIMER: |
| 143 | S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:- |
| 144 | Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3 Nos. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) |
| 145 | SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: |
| 146 | CUBICAL PEDESTAL: |
| 147 | Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4\\" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:- |
| 148 | Cubical Size 1200mm high, 900mm wide and 350mm deep with platform dimensions 1000mm x 450mm x 450mm |
| 149 | Supply and erection of LED Street Light 45watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 150 | Supply and Erection of LED Post top 40/45 watt Opal Diffuser Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 151 | Add 1% Culture Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender