Tender For .Renovation Of Marriage Hall Near Sanjivini Narsingh Home Under Baghmara Block.
Tender Value
6.32 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
1 days left
EMD
12700
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for .Renovation Of Marriage Hall Near Sanjivini Narsingh Home Under Baghmara Block.
BOQ
| Sl. No. | Item Description |
| 1 | labour for site clearance all complete job. |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. 5.8.9 |
| 4 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Providing 63 mm thick R.C.C M20 with nominal mix of 1:1.5:3 in chajja with approved quality of stoe chips 20 mm to 6 mm size graded and clean coase sand of F.M 2.5 to 3 including making drip coarse mix in concrete in mixer, placing in position screening ,vibrating, striking and provinding 6 mm C.P (1:4) in celing and sides of chajja with making drip course curing --do-- E/I. |
| 6 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges |
| 8 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. B.C.D 5.7.6 |
| 10 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 11 | Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 12 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.5.10.10 |
| 13 | Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 5.4.34 |
| 14 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D 5.8.45 |
| 15 | Float glass panes of nominal thickness 5 mm (weight not lessthan 12.50 kg/sqm) Window |
| 16 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 18 | Single tee with door 12.42.3.2 110x110x110 mm |
| 19 | Bend 87.5° 110 mm bend |
| 20 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm bythe same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3mm thik |
| 21 | sand lead 20km (p) |
| 22 | stone chips lead 15km (p) |
| 23 | cement lead 3 km (p) |
| 24 | Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required.1.1.3 Group C |
| 25 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required.1.7.2 :- 2x2.5 sqmm+1x2.5sqmm earth wire |
| 26 | 1.7.5 :- 2x10 sqmm+1x10 sqmm earth wire |
| 27 | 1.7.12 :- 4x16 sqmm+2x6 sqmm earth wire |
| 28 | Supplying and fixing suitable size GI box/PVC do………do…… all complete job 1.22.9 :- 210x206x48mm |
| 29 | 1.22.8 :- 170x221x48mm |
| 30 | 1.22.1 :- 75x75x50mm |
| 31 | Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 2.9.4 :- 4WAY Double door , horizontal type. |
| 32 | Supplying and Fixing- C series MCB 6/32/Amps TPN do……do……. All complete job |
| 33 | Supplying and Fixing- C series MCB 6/32/Amps SPN do……do……. All complete job |
| 34 | Supplying and fixing following rating four pole 415 volts Isolator in the existing MCB DB complete with connections testing and commissioning etc as required2.15.2 :- 63 amps |
| 35 | ITC ceiling fan installation |
| 36 | ITC exhaust fan upto 450mm sweep installation |
| 37 | Supplying Installation ,testing and commissioning of following size ceing fan 3 blades conforming to IS : 374:2019 including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm FR PVC insulated ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required. 1200 mm (48'') Ceiling fan |
| 38 | Supplying 300 mm exhust Fan 12'' (300 mm) |
| 39 | Supplying LED 15/16 Watt |
| 40 | LED FLOOD LIGHT 50/60 W |
| 41 | S/F Batten Holder -Do - -do- |
| 42 | Providing & Fixing 63 Amp 4 Pole on off Changeover Switch |
| 43 | supplying and fixing following piano type switch/socket on the exiting box/ cover including connections etc as required 3 pin 5/6 A socket outlet Each |
| 44 | 5/6 amps switch |
| 45 | Supplying fitting and fixing on ceiling /wall mounted single /double box type 4' x 40 watt tubelight with copper choke complete as required |
| 46 | Providing fitting and fixing vitreous white glazed earthen ware Wash hand basinof parry hindustan or any other I.S.S approved make supported on painted C.I or R.S brackets with 32mm C.I,15mm dia C.I body brass spindle stop cock of approved quality of weight not less than ,350 grams ,32 mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc.all complete as per specification and direction of E/I. |
| 47 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 gms) with extra socket all complete as per specification and direction of E/I. |
| 48 | Supplying fitting and fixing (b) mirror of 6mm thick glass bevelled edge mirror including C.P brass revolving fitting 3mm ply wood board and C.P hinges to fix with mirror. Complete with all materials as per specification and direction of E/I. (i) 600mm x450mm size |
| 49 | (C) (i)C. P brass towel rail 20mm x 600mm with bracket container |
| 50 | Making Holes in wall for laying GI Pipes & Restoring the same after pipe laying as per specification (250 mm Thick Wall) |
| 51 | Providing & Fixing Brass /CI Stop Cork Of approved quality (A) 20 mm Dia |
| 52 | Providing and fixing CPVC pipes do……..do…… all complete job. Exposed on Wall 20 mm nominal outer dia Pipes |
| 53 | 32 mm nominal outer dia Pipes |
| 54 | Conselled 15mm dia |
| 55 | Supplying 100mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3HP, 5o Hz, A.C. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitabl for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined nonreturn valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump.Submersible pump Set of 2 HP Single Phase 150 mm dia (with Bronze impeller) up to 8 stages. |
| 56 | D.O.L. Starter |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40mm nominal outer dia pipe |
| 58 | Rope and motor lowering and fitting |
| 59 | Polythene water storage tank of mark with cover and suitable lcocking system in double layer confirming to Is 12701-1996 with ;atest revision |
| 60 | Goods & Service Tax (G.S.T. 18%) |
| 61 | 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender