Tender For Revival, Restoration,Preservation And Maintenance Of Syed Shah Kirmani (Ra) At Batwina.
Tender Value
41.94 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
83880
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival, Restoration,Preservation And Maintenance Of Syed Shah Kirmani (Ra) At Batwina.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) all complete. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:50 meter beyond 1m from cutting edge:All kinds of soil : |
| 3 | P/L, of dry stone soling duly hand packed for foundation ,footings, floors etc with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) complete. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 50 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed (necessary Plaster included) incl. mouldings, cornice etc whereever required all complete.. |
| 7 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood incl. all necessary fittings, fixtures, fasterners, adhesives, hardware, labour, tools, scaffoldings, carriage and all incidential works required for proper completion of the job complte in all respects. |
| 8 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Paanch Murabah complete in all respects (Pattern and design should be approved from EIC) incl. all necessary fittings, fixtures, fasterners, adhesives, hardware, labour, tools, scaffoldings, carriage and all incidential works required for proper completion of the job complte in all respects. |
| 9 | Providing and fixing of 10 mm thick ( 3- Ply) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc. incl. all necessary fittings, fixtures, fasterners, adhesives, hardware, labour, tools, scaffoldings, carriage complete. |
| 10 | Providing and fixing of 25mm thick first class Walnut wooden panels with carving design (as per the EIC) over the walls incl. polishing with PU glossy polish with base sealer as per the directions of EIC incl. all necessary fittings, fixtures, fasterners, adhesives, hardware, labour, tools, scaffoldings, carriage and all incidential works required for proper completion of the job complte in all respects. |
| 11 | PU Polishing Two or more coats on new works incl. a coat of wood filler, epoxy etc as per directions of EIC all complete. |
| 12 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm all complete. |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood all complete. |
| 15 | Providing and fixing of 12mm toughened glass incl. all necessary fittings and fixtures all complete job. |
| 16 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded all complete. |
| 17 | Providing and fixing hi-rib colour coated G.S sheet roofing fixed,self trapping screws with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm dia. With bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete( upto a pitch any pitch in horizantal/ vertical/ or curved surface ) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(1.00 mm thick with zinc coating not less than 275gram/ Sqm) or providing and fixing of UV stablized fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated JorL hooks, bolts and and nuts 8mm dia. With bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete( upto a pitch any pitch in horizantal/ vertical/ or curved surface ) excluding the cost of purlins, rafters and trusses etc. the sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stablizer in resin system under approximately 2400 psi and hot cured. The shall be of uniform pigmentation and thickness without air pockets and shall conform to IS:10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\") as specified) incl. ridges and valleys all job complete. |
| 18 | Wooden planking, tougued and grooved or chips as per the directions of EIC in flooring incl. fixing with iron screws, Marine fevicol complete 12mm thick first class teak/Oak/Deodar wood incl. PU polishing. |
| 19 | Providing and fixing walnut wood pinjra work of approved design and pattern as directed by EIC fabricated from seasoned walnut wood members of 12mm thickness, incl. cutting, carving, framing, assembling, fixing in position and finishing with PU polish of approved shade and quality. The item shall also include the cost of all necessary fixtures, fasteners, adhesives, hardware, labour, tools, scaffolding, carriage and all incidental works required for proper completion of the job complete in all respects. |
| 20 | Providing,laying & supplying of chemical adhesive for tiles of 20 kgs @ 1kg/16sft complete in all respects. |
| 21 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 22 | Providing and fixing of ornamental benches 3 seater of specified design of specification made of cast iron legs/arms and hollow rectangular tubes 3mm thick incl. all carriages and fixing charges complete. The cost shall include the fixing in (12\\"x12\\"x24\\") concrete blocks incl. all earth work, soling complete job as per directions of EIC at site.(heavy duty) |
| 23 | Carriage of Material:- 40 mm Sand/Stone agg. For an avg. lead of 10 Kms. |
| 24 | Carriage of Material:- Sand/Stone agg. For an avg. lead of 10 Kms. |
| 25 | Electric Part |
| 26 | Wiring for Light point/Exhaust/Wall Fan point with (P+N+E) 3x1.5 sq.mm FRLS-H/HFFR PVC insulated Multi strand Copper conductor single core cable (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) in existing surface/recessed Conduits (Excluding Cost of Conduit) laid in slabs with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 27 | Supplying and Fixing of Indicator as required, ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/Equivalent Make & shall be approved before execution of work. |
| 28 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified of Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make. |
| 29 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) |
| 30 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 31 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Salzer/Paraflex Make) |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 33 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS-H/HFFR PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Polycab/Anchor/Finolex/Salzer /Havells/Paraflex Make) & shall be approved before execution of work. |
| 34 | 2x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting/Inverter/Heating Point Sub main in One run from Main Panel to Distribution Boards.(02 Circuit) |
| 35 | 2x2.5 sq.mm+ 1x2.5 sq.mm (P+N+E) for Lighting/Inverter Circuit in One run from switch boards to Distribution Boards. |
| 36 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/ABB /Schneider/BCH Make) |
| 37 | Supply/Fixing/Testing and Commissioning of Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (L&T/Siemens /Legrand/ABB/Schneider/BCH Make) |
| 38 | 25-32Amp. |
| 39 | 40Amp. |
| 40 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (L&T/Siemens/Legrand/ ABB /Schneider/BCH Make) |
| 41 | 12 way , Double door |
| 42 | Supply/Installation/Testing and Commissioning of IP-65/68 Homogenous LED Strip (Warm Type) Warm light with following Specifications: Input Wattage: 08-10W / Mtr,Input Voltage: 220 - 240VAC,Input Frequency: 50 Hz, Input Current (Max): 50mA, Power Factor:. > 0.95,Surge Protection:2.5KV, High Voltage Protection:300V,HI-POT:1.5KV,IP Rating:IP 65/68,Working Temperature:-10°C to 50°C, LED:Bridgelux,Lumen Maintenance:70% After 50000 BH,Rated CCT: 3000K, 4000K, 6500K,Rated CRI:> 80,System Efficacy:100lm/W,Housing:Silicon Pipe covers the LED Strip Light of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 43 | Supply/Fixing/Testing and Commissioning of of Adoptor (CV DRIVER LED STRINGS 12 V 2 A IP44-66) of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 44 | Supply and fixing of 12 Watt LED Powder coated die cast/Extruded aluminum Body including trim with Aluminum Reflector(System lumen efficacy ≥ 105 < 120 lm/Watt ) Recess/surface mounted (Commercial type) downlighter having following specficafications .The luminaire should have a colour temperature of 6500°K, CRI≥80 and SDCM≤5. Luminaire shall be designed to emit initial system lumen output of greater than 2520 lumens with minimum system efficacy of 140 lumen/watt .The downlighter shall be back-lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing /body should made of pressure die-cast aluminum. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make:Bajaj/Halonix/Surya/Equivalent make. |
| 45 | Supply/Installation/Testing and Commissioning of upto 400mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB o including connection etc USHA/Anchor/Polycab/Orient/Halonix/Equivalent Make. |
| 46 | Supplying, installation, Testing & Commissioning of 50 Watt (System lumen efficacy ≥120 lm/Watt) Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMIEMC as per CISPR -15 , lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Wattoutput . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make:Bajaj/Halonix/Surya/Equivalent make. |
| 47 | Supply/Installation/Testing and Commissioning of BLDC 1200 mm sweep, ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Halonix/Polycab/Orient Make.(5-Star) |
| 48 | Supply/installation/testing and commissioning of CPRI-approved panel Wall/floor-mounted compartmentalized, 230 volts DP MCCB Main Distribution panels, fabricated out of sheet steel of 16 gauge dust-protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel.The Panel is to be provided and fitted with the following adjustable-type controlling/protection switchgear devices:1. Normal Incoming:100 Amp DP MCCB with extended thimbles of Legrand/Siemens/ABB//LK make = 1 No.,200 Amp Bus bar Al Strips(P+N) = 1 Set,Multi Functional meter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicators =1 setOutgoing:(1) 63 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 01 No for normal heating sub main(2) 40 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 01 No for Sub main lighting(3) 32 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No for Sub main lightingThe Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to be approved by Engineer Incharge before manufacturing. |
| 49 | Supply/Laying/Testing and Commissioning of 2 Core 25 mm sq. Al armored XLPE Insulated,PVC cable Havells/RR-Kabel/KEI/Paramount/Equivalent Make. Including Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (01.5 Feet below ground level) of standard make as approved including excavation and refilling the trench were required.The cable shall include end termination lugs with its crimping /taping. |
| 50 | Providing of Earthing Complete by GI Pipe 40mm 3 mtr long through GI Strip 25x3mm for Panel. |
| 51 | Supply/Installation/Testing/Commissioning of Antique Brass Lantern Pendant light (Decorative) as per departmental choice of Standard Make & Shall be approved not less than by SDO. |
| 52 | Supply/Laying of 25/32mm Dia PVC Conduit of Anchor/Ravinder/Polypack/Finolex Make with other accessories like bends,etc complete to be laid in Ceiling/wall etc. |
| 53 | Supply/Installation/Testing/Commissioning of 02-03KVA/24V Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified (with 2-Year Warranty), 02 No. of 180Ah,12V Tubular battery (with 36 Months Warranty) & Suitable Trolley Support for Inverter resting & resting of Tubular Battery etc Havells/Luminious/EXIDE/AMRON/Microtex Make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender