Tender For Renovation Of Existing Building Towards Setting Up Of Libraries For Children & Adolescents With Digital Infrastructure In District South Goa, Taluka Quepem In The State Of Goa. (Civil, Internal Electrification, Hvac, Interior And Allied Wo
Tender Value
1.66 Crore
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
3.33 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Existing Building Towards Setting Up Of Libraries For Children & Adolescents With Digital Infrastructure In District South Goa, Taluka Quepem In The State Of Goa. (Civil, Internal Electrification, Hvac, Interior And Allied Works) (Package No :- Ga01/Ren/09)
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSRepairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping g within 50m lead. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 2 | Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in superstructure upto floor five level. |
| 3 | Providing and laying upto floor five level reinforced cement concrete (1:2:4) in kerbs, steps and the like excluding the cost of centering, shuttering and finishing and reinforcement (1 cement: 2 coarse sand: 4 graded grantic or basaltic aggreate 20mm nominal size |
| 4 | Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth |
| 5 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 6 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon |
| 7 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws) |
| 9 | Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete |
| 10 | Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 11 | Providing & fixing 12 mm thick frameless toughened glass door shutter of approved brand & manufacture, including providing & fixing top & bottom pivot & spring type fixing arrangement & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock & stopper etc.to be paid separately) |
| 12 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 13 | Providing & fixing Stainless Steel tubular lever D Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete |
| 14 | Providing & fixing 12 mm thick frameless toughened glass door double shutters of approved brand & manufacture, including providing & fixing top & bottom pivots & spring type fixing arrangement & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock & stopper etc.to be paid separately) |
| 15 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters.b. Plain plate glass |
| 16 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section. |
| 17 | Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete |
| 18 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.Plain grill |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 20 | Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses of 0.63 mm thick sheet - 24 G |
| 21 | Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design.0.80 mm thick sheet |
| 22 | Proving ridges or hips of width 60 cm over all in plain G.I. sheet fixed with galvanized iron J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete0.80 mm thick sheet. |
| 23 | FLOORING AND FLOOR FINISHESProviding & fixing Vinyl flooring of approved shade & design with adhesive complete |
| 24 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete (600 x 600 mm light Shades) |
| 25 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete (dark shade) |
| 26 | Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35/M40 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer in thickness of 60mm with Red/ Black colour (M35 grade) |
| 27 | PLASTERING AND FINISHING WORKS12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 28 | Removing white or colour wash by scrapping, sand papering & preparing surface smooth including necessary repairs to scratches etc. complete |
| 29 | Providing & applying white cement based putty of average thickness 1.00mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even & smooth complete |
| 30 | Applying one coat of distemper primer of approved brand & manufacture on wall surface |
| 31 | Wall painting (two or more coats) with plastic emulsion paint of approved brand & manufacture on new work to give an even shade |
| 32 | Applying priming coat with ready mixed primer of approved brand & manufacture on steel work |
| 33 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade |
| 34 | White washing with lime on new work ( three or more coats) to give an even shade. |
| 35 | DISMANTLING DEMOLISHING & REPAIRS WORK Dismantaling & removing of existing Storage cabinets/Counters made up in plywood/Prelam board of all sizes & fixed over with laminate/veeners etc & disposal of all dismantled unserviceable material at all leads & lifts as directed by Engineer |
| 36 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW |
| 37 | Dismantling the existing Telephone/Lan/Wan/TV cables & wires of all sizes along with casing-capping/conduit complete as per specification No: WG-DM/PW |
| 38 | MISCELLANEOUS WORKSProviding anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building : Post construction |
| 39 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 40 | Drilling holes of specified dia., fixing it with PVC nozzles, sealing the diaphragm with Epoxy Sealant, EPCO-1010, allow it air cure for minimum 8 hours, cutting nozzles after grouting and sealing it with EPCO-1010 etc. complete as directed. Injecting low viscous high molecular weight polymer, MONOPOL with pressure created by compressor and epoxy injector with accessories. The pressure shall be not exceeding 3-4 kg/cm2 . Grouting to be done in cracks till the nozzle refuses to accept the grout or it flows from the adjacent nozzles etc. complete. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 41 | INTERNAL WIRINGWiring for light point /fan point/exhaust fan point/call bell point with 1.5sq.mm FRL SPVC insulated copper conductor single core cable in surface PVC conduit (medium)with modular switch ,modular plates, suitable size modular GI box of specified category & earthing the point with1.5 sq.mm FRL SPVC insulated copper conductor single core cable etc. as required (g) Group A -- with Cat C Modular Accessories |
| 42 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 43 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 44 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 45 | Wiring for group controlled light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 46 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(a) 5/6 A switch Cat A |
| 47 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(c) 15/16 A switch Cat A |
| 48 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(d) 3 pin 5/6 A socket outlet Cat A |
| 49 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(e) 6 pin 15/16 A socket outlet Cat A |
| 50 | Supplying & fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required(b) Cat B |
| 51 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(a) 1 or 2 Module (75 mm x 75 mm) Cat A |
| 52 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(b) 4 Module (125 mm x 7 mm) Cat A |
| 53 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(c) 6 Module (200mm x 75 mm) Cat A |
| 54 | TELEPHONE & DATA NETWORKINGSupplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required(b) 25 mm |
| 55 | Supplying & drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required(a) Cat 6 |
| 56 | Supplying, installation & testing of suitable size modular GI box , modular plate & cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required(b) Cat B |
| 57 | DB & MCBSupplying & fixing following way SPN sheet steel MCB distribution board 240 V on surface/recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)(g) 12 way double door Cat A |
| 58 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(f) SP, Cat B |
| 59 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(g) SPN, Cat B |
| 60 | LIGHT FIXTURE & FANSSupplying & erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 61 | Supply & erecting fan hook box (100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 62 | Supplying & erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire |
| 63 | Supplying, erecting & terminating 10 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete |
| 64 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(d) 8 Module ( 125 mm x 125 mm) Cat A |
| 65 | Supplying, installing, testing & commissioning of 1400 VA to 1600 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries) |
| 66 | Supplying & erecting 12 V/150Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete |
| 67 | Supply & fixing LED 36W, RC 360 B-4000KV I60W 60PSUOD 36W 600X600 LED PENAL LIGHT Philips LED |
| 68 | Supply & fixing 5W 4000 K 2054 270 LUMEN OUTPUT HAVELLS LED LIGHT |
| 69 | HVACSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ SAC |
| 70 | Providing annual comprehensive maintenance contract for 1.5 TRsplit/window air conditioning unit complete as per terms & conditions. Jobincludes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work & plastic material |
| 71 | Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner & finishing the site as original |
| 72 | Supplying erecting carbon dioxide (CO2) fire extinguisher of 4.5 kg capacity catridge type conform to IS 2878/15683 complete erected with necessary claamp made from 50 x 6mm. M.S lat with nut & bolts routed in wall complete. |
| 73 | INTERIORS, FURNITURE WORKS & ASTHETICSBOOK RACK WITH WINDOW SITING : Providing, fabricating & installing a storage rack of L 6962MM, H 2100MM & W 400MM in position which is fully made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP marine plywood 710. All exposed surfaces finished with 1.0mm thk laminate of approved shade. All inside surfaces which are unseen to be finished with 0.7mm thk white laminate. The storage has to be covered with framed glass, properly hinged at the supports. All exposed edges to be finished with TW beading patti (min 10mm) finished with French polish (Min 3 Coats). Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing Providing & fixing soft furnishing 2\\" PU foam sheet, further covered with velvet fabric as per design shown in render having 25000 & above martindel, finally screwed on 12mm thk ply |
| 74 | VERTCAL BOOK STORAGE : Providing, fabricating & installing a storage rack of L 1239MM, H 2100MM & W 400MM in position made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk white laminate. The storage has to be covered with framed glass, properly hinged at the supports. All exposed edges to be finished with TW beading patty (min 10mm) finished with French polish (Min 3 Coats). All inner surfaces seen inside glass door should be finished with 1.00mm Laminate. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 75 | STORAGE CUPBORD : Providing, fabricating & installing storage cupbord of L 2.70MM, H 750MM & W 400MM in position made out of 710 marine plywood and finished with 1,0mm thl Laminate of approved shade. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 76 | BOOKS STORAGE CUM SEATING : Providing, fabricating & placing a customised seating made up of 19mm/6mm BWP 710 plywood finished with 1mm thk wooden laminate approved brand & make, further 40 kg/m3 density PU foam covered with velvet fabric having 25000 & above martindel |
| 77 | WORK STATION TABLE : Providing, fabricating & placing in position computer table of L 900MM, H 750MM & W 600MM made with 18mm Prelaminated particle board with 2mm edge bending. All tables should have inbuilt CPU trolley or CPU hanger, Wire Manager & key board tray of standard size |
| 78 | RECEPTION TABLE : Providing, fabricating & placing in position reception table L 1500MM, H 750MM & W 800MMmade with 18mm Prelaminated particle board with 2mm edge bending with all necessary hardware. |
| 79 | TABLE WITH ROLLERS : Providing, fabricating & installing in position working table with rollers of L 1028MM, W 741MM made up of woden legs 3\\"x 3\\" second class matti wood with top made up of 710 19mm BWP plywood with edge profile 38mm running all around, table legs finished with duco & table top finished with 1mm solid colour laminate, complete with necessary hardware |
| 80 | 16\\"x16\\" CUSIONS : Providing & placing in position cushions filled with hollw micro fiber fillings maintaining the asthetics of the design, further cushions covered with fabric of 250 GSM |
| 81 | ROLLER BLINDS : Providing & fixing in position roller blinds of approved make, colour, shade of varying length, approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings & fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing /image, specs & direction of the engineer in charge |
| 82 | Providing & fixing powder coated aluminium slidding or fixed partition where shutters are made up of 2 vertical members & 2 horizontal members (vertical members 45x45x18 gauge & horizantal top member 45x45x18 gauge & bottom member 115x45x18 gauge) mounted on slidding channel fixed to ceiling and with a gider fixed on the floor to avoid sway, finished with georgean bar as per drawing 5mm glass lock & handles of approved make & brand. |
| 83 | HIGH BACK CHAIRS : Providing & placing in position high back chairs having head rest with 100% polyester fabric, derived BIFMA Compliant, knee tilt syncro 4 mechanism, Adjsutable External lumbar support, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. HBC |
| 84 | WORK STATION CHAIRS : Providing & placing in position workstation chairs with medium back with mesh/ HR Foam seat, derived BIFMA Compliant, syncro 4 mechanism, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. WC |
| 85 | LOUNGE CHAIRS : Providing & placing in position lounge chair 750Lx760Dx710H of hardwood frame PU foam of 32kg/m3 density placed on webbing belt, further covered with velvet fabric as per design shown in render having 25000 rubs & above martindel |
| 86 | GREEN PLANTER : Supplying & fixing in position approved artificial Green plant with PVC pot (pot size around 400mm dia x 1200mm height). All the material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 87 | WALL SHELVES: Providing, fabricating & installing in position wall shelves made out of 9mm thk BWP 710 marine plywood and finished with1.0mm thk wooden laminate :size 1500 mm x 1000 mm |
| 88 | STAINLESS STEEL DUSTBIN : Providing & placing in position 16 gauge pedal stainless steel dust bin of Grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 89 | PICTURE FRAME : Supplying & fixing in position approved canvas painting with synthetic frame & lamination. The details need to be as per the instructions of Engineer in charge. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, Size 600mm x 1200mm |
| 90 | NOTICE BOARD : Supplying & fixing in popsition Notice Board of size L 1200mm x H 900mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such screws, lockong arrangements etc. & making arrangements for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, |
| 91 | WALL CLOCK : Supply & fixing in position approved make, approved colour wall clock circular or square (min one side 250mm) quartz with bold numbers, 3 hands. |
| 92 | WALLPAPER : water resistant HD wallpaper showing greenary/ tropical background image of Goa |
| 93 | Aesthetic Item : To showcase the Local, National or State Theme. Frames of sizes: 600mm x 600mm - cultural kavi art drawings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender