Tender For Construction Of Samudayak Toilet In Mahadev Sal Compus In Goilkera Block
Tender Value
13.06 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
26500
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Singhbhum → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Samudayak Toilet In Mahadev Sal Compus In Goilkera Block
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. SOR item No. 5.1.1+5.1.2 |
| 2 | Filling in foundation trenches and plinth in layers ---do---do-- as per directon of E/I. SOR item No. 5.1.8 |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume). SOR item No. 5.1.10 |
| 4 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. SOR item No. 5.6.3 |
| 5 | Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.1.2 |
| 6 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.9.1 |
| 7 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l .SOR item No. 5.2.6 |
| 8 | Providing R.C.C.M- 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.10 |
| 9 | Providing designation 75 B brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials , scaffolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.2.14 |
| 10 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.11 |
| 11 | Providing and laying damp- proof- course 50mm thick with cement concrete 1:2:4 ---do----do---- as per direction of E/I/ SOR item No. 5.3.5 |
| 12 | Providing av. 63mm thick R.C.C.M-200 with nominal mix (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.11 |
| 13 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.11 |
| 14 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.3.11 |
| 15 | Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.SOR item No. 5.5.29 |
| 16 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) SOR item No. 5.5.12 |
| 17 | Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l. SOR item No. 5.6.7 |
| 18 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.SOR item No. 5.7.6 |
| 19 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. SOR item No. 5.7.2 |
| 20 | Providing and laying double charge Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easilySOR item No. 5.6.28. |
| 21 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With commercial grade colour tiles SOR item No. 5.6.23.4 |
| 22 | Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) SOR item No. 13.47.1 DSR |
| 23 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification) SOR item No. 5.8.41+5.8.45 |
| 24 | Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. SOR item No. 5.5.5 |
| 25 | 12mm to 16 mm SOR item No. 5.5.5 b |
| 26 | Centering and shuttering including strutting ,proping etc and removal of formwork forfoundation ,footing ,bases of column etc for mass concreteing SOR item No. 5.3.17.1 |
| 27 | Centering and shuttering including strutting ,proping etc and removal of formwork forColumns, piers, pillars, Abutments,posts and struts SOR item No. 5.3.17.6 |
| 28 | Centering and shuttering including strutting ,proping etc and removal of formwork forlintels, beams, plinth beams,girder and cantilevers.SOR item No. 5.3.17.5 |
| 29 | Centering and shuttering including strutting ,proping etc and removal of formwork forsuspended flors and roofs, balconies and access platform. SOR item No. 5.3.17.3 |
| 30 | Electrification Work Point wiring in PVC conduit, with piano type swtich:- Wiring for point /fan point /exhaust fan point /call point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch ,phenolic modular plate, suitable size PVC/G.I. box etc.as Group A SOR item No. 1.1.1 |
| 31 | Wiring for light/ power plug with 2x4 sq mm Power plug wiring in pvc conduit 2x4 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1No.4sqmm FRPVC insulated copper conductor single core cable for loop earthing as required .SOR item No. 1.5 |
| 32 | S/F PVC/G.I box of following size on surface or it recess with suitable size of phenolic laminated sheet cover infront including painting etc as required , 210mmx206mmx48 mm deep (10\\"x12\\") SOR item No. 1.22.9 |
| 33 | Supplying and fixing following piano type switch/ socket on the existing modular plate and switch box including connection but excluding modular plate . As required. 5/6 amps,one way switch SOR item No. 1.23.1 |
| 34 | Supplying and fixing following piano type switch/ socket on the existing modular plate and switch box including connection but excluding modular plate . As required. 5/6 amps,3 pin socket outlet SOR item No. 1.23.4 |
| 35 | 9/10 watt led blub SOR item No. M-855 |
| 36 | Supplying and fixing 6 amps to 32 amps rating , 240 volts, \\"B\\" series , miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning , etc. as required. SOR item No. 2.11 |
| 37 | S/F DP MCB Isolator :- Supplying and fixing following rating , double pole, 240V, isolator in the existing MCB DB complete with connections, testing and commissioning , etc. as required. SOR item No. 2.14 |
| 38 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire SOR item No. 1.7.1E.D |
| 39 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire SOR item No. 1.7.2 |
| 40 | Sanitary and Water supply works Providing and fixing G.M non return valve Horizontal / vertical type of approved quality as per specification and direction of E/I. SOR item No. 3.1.7 (iii) Horizontal - 25 mm dia |
| 41 | Cutting chhaja or cornice for laying G.I pipe and restoring the same with R.C.C(1:2:4) Brick work in cement mortar (1:4) as per specification and direction of E/I.SOR item No. 3.1.17 |
| 42 | Making holes in walls for laying G.I pipe and restoring the same after pipe laying as per specification and direction of E/I. (a) 125mm thick wall SOR item No. 3.1.18 (a) |
| 43 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.SOR item No. 3.1.21 |
| 44 | C.P brass shoap dish container medium quality with screw and hinges etc |
| 45 | Supplying, fitting and fixing viterous earthen ware I.W.C. of parry hindustan or any other ---------do------do--------all complete as per specification and direction of E/I. 580 mm long - with 12.5 ltr. Low level P.V.C cistern.SOR item No. 3.2.1 (A)b |
| 46 | Supplying and fixing flat brick viterous white glazed earthen ware urinal of hindustan 'parry' or any other approved I.S.S make with 5 ltr. Capacity C.I. ------do------do ----------- all complete as per specification and direction of E/I. standard corner ( 600mm X 350mm )SOR item No. 3.2.3(b) |
| 47 | supplying ,fitting and fixing vitreous glazed earthen ware indian squating type 600mmX300mm urinal plate of hindustan or any other I.s.s. approved make with internal flushing rim,100mm white -----do------do--- all complete as per specification and direction of E/I. SOR item No. 3.2.4(a) dwsd |
| 48 | supplying fitting and fixing viterous white glazed earthen ware hand wash basin of parry hindustan or any other I.S.S approved ---------do------do------ all complete as per specification and direction of E/I.SOR item No. 3.2.5 |
| 49 | Earth work in excavation for laying different types and sizes of R.C.C spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.SOR item No. 3.3.1 (i) |
| 50 | Labour for layinf , fitting and fixing NP2 R.C.C spu pipe with colors in lines, level and grade-------do-----do--------all complete as per specification and direction of E/I. 150 mm dia RCC spun pipe - upto 3.0 m depth of invert below G.L.SOR item No. 3.3.6.2 |
| 51 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.SOR item No. DSR 12.41 |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SOR item No. DSR 1.2.42 |
| 53 | 110 mm SOR item No. DSR 1.2.42.2.2 |
| 54 | 110x110x110 mm SOR item No. DSR 1.2.42.3.2 |
| 55 | 110x110x110 mm SOR item No. DSR 1.2.42.4.2 |
| 56 | 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.SOR item No. DSR 18.7 |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. SOR item No. DSR 18.8 |
| 58 | 20 mm nominal outer dia Pipes SOR item No. DSR 18.8.2 |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.SOR item No. DSR 18.48 |
| 60 | SEPTIC TANK AND SOAKPITEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l SOR item No. 5.1.1 |
| 61 | Extra for earth work in hard soil as per specification and direction of E/I SOR item No. 5.1.2 |
| 62 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume). SOR item No. 5.1.10 |
| 63 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. SOR item No. 5.6.3 |
| 64 | Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.SOR item No. DSR 5.3.1.2 |
| 65 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. SOR item No.5.2.6 |
| 66 | Reinforced cement concrete work in wall (any thickness) including attached pilaster, buttresses ,plinth and string courses, fillerts, colume, pillers, piers abutments, posts and struts etc above plinth level up to floor five level but excluding cost of reinforcement, centering shuttering and finishing as per building sppecification and direction of E/I for RCC M-200 in (1:1.5:3) Above plinth to 5 level. SOR item No. DSR 5.3.10 |
| 67 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. Providing 1.5 mm cement punning including curring, carrage of water with all leads and lifts as per building specification and direction of E/I.SOR item No. 5.7.1+5.7.11 |
| 68 | Supply of pvc pipe 4\\" dia vent pipe |
| 69 | Reinforced cement concrete work in beams, suspended floors,roofs having slope up to 15◦ landings, balconies,shelves,chajjas,lintels bands,plain window sills,staircase and spiral stair case above plingth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 SOR item No. 5.3.11 |
| 70 | Providing MS steel reinforcement of 10 mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.SOR item No. 5.5.5 (a) |
| 71 | Providing MS steel reinforcement of 12 mm.to 20 mm dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. SOR item No. 5.5.5 (b) |
| 72 | Centering and suttering including strutting ,propping etc. and removal of form for suspended floors,roofs,landings,balconies and access platform SOR item No. 5.3.17.3 |
| 73 | Deep Boring (200 x 150 mm dia ) & Installation of 2 H.P. Submersible Pump Set200/150 mmdia deep borewell Supplying all material,labours,tools & equipments for drilling 200/150 dia Borewell in any kind of soil/rock by using DTH super ring machine and bell hammer technology inclusive of molillisation demolillisation of ring air compressor all accessories tools and plants labour etc.including of transportation charges up to the site & all complete job as per direction of E/I SOR item No.P.P-57 IN M-1035 |
| 74 | (b) From 51.0 M to125.00 M |
| 75 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia SOR item No.P.P-65 IN M-1048 |
| 76 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer in-charge SOR item No. DSR 23.13.3 |
| 77 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia SOR item No DSR 23.13.3 |
| 78 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp SOR item No DSR 23.14.3 |
| 79 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages2 HP S Pump SOR item No.P.P-66 IN M-1055 |
| 80 | supplying fitting and fitxing of standard Mac 2.00 HP submersible pump starter pannel board with arrangement of all necessary protection. including all taxes all complete job as per direction of E/I.SOR item No.P.P-57 IN M-1065 |
| 81 | Supplying fitting and fixing 3 crore 4 sq. mm Flat copper submersible cable FINOLEX / HEVELS make including all taxes etc all complete job as per direction of E/I. SOR item No.E.P-36 IN M-1627 |
| 82 | Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe including of required fittings solvent etc completed as per direction of E/I.(M-930 K(v) Rs.300.00/met +M-1051,Rs 5.58/met) SOR item No.P.P-IN M-930 K (v) |
| 83 | Carriage of materials Sand |
| 84 | Cement |
| 85 | Stone chips |
| 86 | Brick |
| 87 | G.S.T @ 18% |
| 88 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender