Tender For Repair To Certain Bldgs Of Stn Hq, Sho, Mdc, Mh & Other Otm Buildings Of Age B/R H/L Under Aor Ge Deolali.
Tender Value
4.40 Crore
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Bldgs Of Stn Hq, Sho, Mdc, Mh & Other Otm Buildings Of Age B/R H/L Under Aor Ge Deolali.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 2 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified. |
| 3 | Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified. |
| 4 | Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified. |
| 5 | M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter complete all as specified. |
| 6 | S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified. |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work as requred on site cost of the same shall be deemed to be included complete all as specified and directed. |
| 8 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 9 | M & L two coats of synthetic enamel paint over priming with red oxide over preparation of new surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 10 | Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed. |
| 11 | S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm incl fixing/hanging with truss/purlin on GI wire from roof complete all as specified and as directed. |
| 12 | M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed. |
| 13 | S&F for in repairs 5 to 8 mm thick interlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed . incl dismantling of old unserviceable board any type . |
| 14 | S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed. |
| 15 | Demolition of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified. |
| 16 | M&L for non skid joint free ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 17 | All as per Sl item No 7 but skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 18 | M&L for 8mm thick (square/rectangular) Vitrified ceramic tiles area of each tile exc 0.18 sqm not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 19 | All as per Sl item No 9 but skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 20 | M&L for 8mm thick (square/rectangular) Vitrified ceramic tiles GVT area of each tile exc 0.36 sqm but not exc 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 21 | All as per Sl item No 11 but skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 22 | M&L Glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick back coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete. |
| 23 | M&L for non skid ceramic tiles of size 6-7mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 24 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror finish polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 25 | M & L for Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado,window jambs and pillar laid over 10 mm thick CM (1:4) as backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror polishing complete all as specified. |
| 26 | M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded glossy finish with coloured cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 27 | M&L for precast cement concrete interlocking tiles 60 mm thick Rouber moulded, prepolished with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 28 | M&L for precast cement concrete interlocking tiles 80 mm thick Rouber moulded prepolished with strength 40 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 29 | M & L for Granite 18-20 mm thick Z black superiour quality machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified. |
| 30 | M & L for Machine cut cudappa stone slab 20 - 22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 31 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 32 | M&L for fabrication & fixing to horizontal & vertical shelves/partations/sides/top/bottom/back sides etc for Modular Kitchen cabinet/wardrobe/cupboard/drawers made out of 17/18 mm thick HDHMR boards (Water/termite proof) with plain on both sides of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping edges should be provided PVC taping to match the colour of board all around incl dismantling/ taking down old u/s board any type complete all as specified and as directed. (Make : Action tesa/Kitply or Archid) |
| 33 | M&L for fabrication & fixing to front side/ all exposed sides of Modular Kitchen cabinet/wardrobe/cupboard/drawers made out of 17/18 mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around incl dismantling/ taking down old u/s board any type complete all as specified and as directed. (Make : Action tesa/Kitply or Orchid) |
| 34 | M&L in repair for 18/19 mm thick preliminated particle board Exterior grade preliminated one side with decorative choice laminated & other side balancing white laminated fixed with screw to timber fram work complete all as specified and as directed . |
| 35 | S&F in repair continuous (paino) hinges, stainless steel, bright finish or electrogalvanised width of flap (when open) in 40mm all as specified. |
| 36 | S & F SS handle for cupboard/kitchen cabinet shutters 100 mm long chrome finish complete all as spd and directed. |
| 37 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified. |
| 38 | S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified. |
| 39 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified . |
| 40 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified . |
| 41 | S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified. |
| 42 | S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified. |
| 43 | S & F in repairs 15 mm dia Stop valves/Angle valve, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 44 | S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 45 | S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified. |
| 46 | S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified. |
| 47 | S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 48 | S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 49 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and hinges locking device complete all as specified. |
| 50 | S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified. |
| 51 | S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. |
| 52 | S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 53 | S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 54 | S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified. |
| 55 | Dismantling water tanks any type (RCC/PVC) incl disconnecting all connection of capacity exc 250 & not exc 500 ltrs. |
| 56 | Dismantling water tanks any type (RCC/PVC) incl disconnecting all connections of capacity exc 500 & not exc 1000 ltrs. |
| 57 | Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 58 | Supply and and fixing, hoisting PVC tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 59 | S&F in repair Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, CP urinal & spreader etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. |
| 60 | S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs. |
| 61 | S&F in repair CP Basin Mixer for mixing hot & cold water of approved quality. |
| 62 | S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed in reapirs. |
| 63 | S&F PVC Cabinet 600x450mm overall size with looking mirror of selected qality glass mountedover PVC Framing as per sample complete fixed in repair complete all as specified. |
| 64 | S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 65 | S & F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified. |
| 66 | S&F stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. |
| 67 | S&F in repair 15 mm any type of spandle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc all as specified and directed. |
| 68 | S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. |
| 69 | S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed . |
| 70 | M&L special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe complete all as specified and as directed. |
| 71 | All as per ite No 70 but for kitchen area n exc 0.50 sqm on plan all as specified and directed. |
| 72 | S&F Health faucet including Mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible pipe & ABS hook including making connection & fixed in repairs complete all as specified and as directed. |
| 73 | Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed. |
| 74 | M&L for rendering on fair faces of brick or concrete work 15mm thick in CM 1:4 and to be finished smooth for external surface complete all as specified and as directed . |
| 75 | M&L for rendering on fair faces of brick or concrete work 10 mm thick in CM 1:6 and to be finished smooth for internal surface complete all as specified and as directed . |
| 76 | M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed. |
| 77 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 78 | M&L for two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified. |
| 79 | M&L for preparation of old decorated (plastered or unplastered) of walls and applying one coat of cement base paint colour approved by GE including washing, rubbing down, scrapping filling of cracks/holes by crack filler complete all as specified and directed. |
| 80 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper complete all as spd and directed. |
| 81 | Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified. |
| 82 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 83 | Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified. |
| 84 | M&L fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified. |
| 85 | Taking down shutters of any description exc 2 sq.m each complete all as specified. |
| 86 | M & L for 2 nd class hardwood as glazed and skeleton shutters 30 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded,divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed. |
| 87 | Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed . |
| 88 | Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed. |
| 89 | Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed. |
| 90 | S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified. |
| 91 | M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified. Please Enable Macros to View BoQ information |
| 92 | M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender