Tender For Certain Repair To Otm Accn In Zone D And E Under Ge Clement Town, Dehradun.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Otm Accn In Zone D And E Under Ge Clement Town, Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 3 | M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 4 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. |
| 5 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring/ paving and mass concrete finished rough to receive cement tiles. |
| 6 | Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4. |
| 7 | M&L Pre-polished Baroda green marble 14 -16 mm thick (table rubbed and polished ) in step, jambs, pillers , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 8 | M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like in including 15 mm thick cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match. |
| 9 | S&F vitreous china wash down water closed pan with connected flushing cistren white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic and flush pipe) complete all as specified and directed. |
| 10 | S&F Wash basins, Vitreous China (oval type) 500x380mm X120MM,counter top including of fixing of supply and waste pipe complete all as specified and directed. |
| 11 | S&F in repairs Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified |
| 12 | S&F in repairs Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 13 | S&F in repairs Anodised aluminium powder coated window and ventilators shutters sliding or fix type, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,including provision of lock in each door, rollers, anodised aluminum snap beading screws etc. complete all as specified |
| 14 | S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion. |
| 15 | S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion. |
| 16 | S & F sheet glass thick ordinary quality in n exc 0.75 Sqm in each pan 4 mm thick with rubber beading as in window. |
| 17 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each . |
| 18 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm Each |
| 19 | M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed. |
| 20 | M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed. |
| 21 | M&L 30mm thick moulded plain WPC solid door shutter: providing (30mm thick) MOLDED WPC Brown Factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water Water Proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 22 | Providing and fixing 32mm thick brand factory made wire mesh solid WPC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mmx40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufactures, 20mmx40mm M.S. square tubes shall be covered with 6mm thick heat moulded WPC prelaminated 'C' channel of size 30mm thickness, 140mm width out of which 125mm shall be flat and 15mm shall be bent in 90 degree on the either side forming stiles & 6mm thick 165mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on the inner side to from top & bottom rail and 180mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on both side to form lock rail, 12mm (6mm x 2) thick,, 20mm wide cross WPC sheet as gap insert for top rail & bottom rail, Pannel will be of stainless steel, wiremesh of 24 gauge to be fitted in by 'C' channel of size 32mmx10mm on the either side in the stiles, the inner side 'C' channel is fixed by 20mm x 40mm MS tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with 20mm x 40mm tube wiith stainless steel, wire mesh gauge interior at top, bottom & lock rail. 10mm x 20mm stainless steel pipe griill fix with MS frame for support wire mesh as per selected design an additional 6mm thick WPC strip of 22mm width is to be stuck on the interior side of the C channel using solvent cement adhesive etc, complete all as specified and directed. |
| 23 | Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed. |
| 24 | Supply and fix 100 mm size Butt hinges, medium weight cold rolled Stainless steel as in repairs all as specified and as directed. |
| 25 | S & F 100 mm long Stainless steel barrel tower bolt of extruded section . |
| 26 | S & F 100 mm longStainless steel handle febricated of extruded section . |
| 27 | Dismantling timber scantlings 40 sq. cm and over in section, in any position for complete all as specified and directed. |
| 28 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for |
| 29 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 omplete all as specified and directed. |
| 30 | Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome complete all as specified and directed. |
| 31 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and directed. |
| 32 | Excavating in post holes (or similar holes) soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as directed. |
| 33 | Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges etc complete all as specified and directed |
| 34 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified |
| 36 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 37 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 38 | Demolition of cement concrete (Un-reinforced) in any position n.exc 15cm thick (above or below GL) complete all as specified and directed. |
| 39 | M&L for cement concrete 1:3:6 type C2 , 75mm thick using 40mm graded stone aggregate as in /plinth protection finished the top surfaces even and without using extra cement including filing grooves with Grade A compound. complete all as specified and directed by Engineer-in-charge. |
| 40 | Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. |
| 41 | M&L Rendering 15 mm thick stone masonry wall surfaces in CM 1:4 finished even and smooth without using extra cement. |
| 42 | M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces all as specified |
| 43 | M&L for 15mm thick cement plaster in CM 1:6 on fair face of brick or concrete walls finished even and smooth without using extra cement complete all as specified |
| 44 | M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper over a coat of wall care putty on walls complete all as specified and directed |
| 45 | M&L for 5mm thick plaster in ceiling of CM 1:3 on brick walls finished even and smooth without using extra cement complete all as specified |
| 46 | M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified |
| 47 | Taking down UPVC (SWR) pipes any dia. |
| 48 | Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 49 | Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 50 | Supply and fix PVC (SWR) bends any radius 75 mm dia of bore. |
| 51 | Supply and fix PVC (SWR) bends any radius 110 mm dia of bore. |
| 52 | Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement. |
| 53 | Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement. |
| 54 | Taking down steel tubing and connections 20 mm dia |
| 55 | All as per item No.54 above but 25 mm dia |
| 56 | S& F in repairs GI tubing 20mm bore, medium grade galvanised with all fitting ISI marked fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 57 | S& F in repairs GI tubing 15mm bore, medium grade galvanised with all fitting ISI marked fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 58 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 59 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 60 | S&F CPVC 25mm outer dia gate valve complete all as specified. |
| 61 | S & F in repair 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed |
| 62 | S & F in repair fancy type 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 63 | S & F in repair for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor. |
| 64 | Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device. |
| 65 | Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) |
| 66 | S & F in repair for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe |
| 67 | S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, complete all as specified and directed. |
| 68 | S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed. |
| 69 | S and F in repair 15mm dia brass CP wall mixer with provision for over head shower with 115mm long bend pipe and wall flange for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 70 | Supply and fix in repair PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity . |
| 71 | Taking down and refixing of door /window in same opening after repair incl all material required to smooth functioning sliding/side hung. |
| 72 | Supply and fix in repair flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, in repair. |
| 73 | Supply and fix in repair PVC connection 15 mm size with PTMT nuts of length 600 mm in repair |
| 74 | Supply and fix in repair for push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia in repair. |
| 75 | Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete. |
| 76 | Supply and fixing in repair in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair. |
| 77 | Supply and fix in repair soap dispenser chromium plated |
| 78 | Supply and fixed in repair angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange . |
| 79 | S&F Looking mirror of selected quality glass 5mm thick bevelled edge mirror selected quality with side ingraving/design fixed with SS fastner nut in repair. |
| 80 | S&F Bass chromium plated brass tubular towel rail 20mm dia, D type 60cm long between flange as in repairs. |
| 81 | Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick. |
| 82 | S & F sheet glass 4mm thick for window ordinary quality in n.exc 0.75 Sqm in each pane with rubber beading as in doors and partition. |
| 83 | M&L for preparation of old surfaces on walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on old decorated surfaces complete all as specified and directed by Engr-in-Charge |
| 84 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 85 | S&F Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/Aluminium frame work with screws 10 mm thick in aluminium snap grid frame work for false ceiling and hanging with 6mm dia GI (upto the 1200 mm length )adjusting level fixed to roof slab by means of ceiling cleats made out of GI flate 40X3mm size 60mm long and expansion hold fasteners 12.50mm dia.40mm dia long complete all as specified and directed |
| 86 | M&L for Non skid Endura coloured tiles 8-10mm thick (square/rectangular) grade-4, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) & 100mm thick PCC (1:2:4) B1 in flooring incl taking down old pcc,tile , set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F in repair PVC hollow section heavy grade designer wall panelling 5.5-6mm thick as approved by Engg-in-charge fixed in position including all matching beading, angle for jambs, cills etc complete all as specified and directed. |
| 88 | M&L for preparation of old decorated distempered surfaces on walls and applying one coat of interior acrylic distemper of approved tint and make all as specified and directed by Engr-in-Charge |
| 89 | M&L for preparation of old surfaces on walls and applying two coat of cement base paint by scrapping the surface & leveling the undulated surface wtih putty complete all as specified and directed by Engr-in-Charge |
| 90 | NOTES :-1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender