Tender For General-Action Plan 2026-2027- Emergency Maintenance Works Of Mal Uzha Rb Canal Shutters Under Mundur Section-Providing Mechanical Shutters At Rbmc Ch.22/840Km, Thenur Branch Canal Ch.1/250Km, Mankurussi Branch Canal Ch.0/785Km And Mankara
Tender Value
6.87 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
2 days left
EMD
17191
Bank guarantee accepted
Document Fee
1520
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Action Plan 2026-2027- Emergency Maintenance Works Of Mal Uzha Rb Canal Shutters Under Mundur Section-Providing Mechanical Shutters At Rbmc Ch.22/840Km, Thenur Branch Canal Ch.1/250Km, Mankurussi Branch Canal Ch.0/785Km And Mankara Branch Canal Ch.1/500Km-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Providing MS shutters at RBMC Ch.22/840km, Thenur branch canal Ch.1/250km, Mankurussi branch canal Ch.0/785km and Mankara branch canal Ch.1/500km |
| 2 | OD3172/2026-2027:Dismantling of the Canal Shutter ( Up to 2Tonne weight )/ Hoisting unit, Embedded parts, etc. of the same and stacking at a distance of 100metre including hire of machinery, labour etc. complete as directed by the departmental officer at site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%) |
| 3 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 5 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 7 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 9 | OD3177/2026-2027:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 10 | OD3174/2026-2027:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 11 | OD3168/2026-2027:Supply of MS round bar including cost of conveyance charges |
| 12 | OD3178/2026-2027:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance. |
| 13 | OD3173/2026-2027:Fabrication and erection of Embedded parts of Canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied |
| 14 | OD3175/2026-2027:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, Seal seat etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete |
| 15 | OD3180/2026-2027:Fabrication and supply of Structural steel Canal shutters ( Up to 2tonne weight ) /Hoisting bridge / Platform and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied |
| 16 | 85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 17 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing |
| 18 | OD3171/2026-2027:Providing base and nut arrangement for hoisting the shutter including cost of all materials, labour, etc. complete. |
| 19 | OD3170/2026-2027:Providing EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN-8 screw shaft, worm gear units having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance. 1m Screw rod, dia 67mm with single start square thread with head pitch of 12.7mm, root dia 62.3mm EN-8 shaft |
| 20 | OD3169/2026-2027:THREAD LESS portion of the screw rod (per metre rate) |
| 21 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 22 | OD3176/2026-2027:Erection of the Canal Shutter ( Up to 2Tonne weight ) / Hoisting bridge / Platform including hand rails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges etc. complete but excluding cost of materials already supplied |
| 23 | OD3179/2026-2027:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender