Tender For Improvement Of Open Spaces Infront Of Juria Rice Mill In W.No.24
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
13 days left
EMD
42374
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Open Spaces Infront Of Juria Rice Mill In W.No.24
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead (data for 2.83 cum) per 1cum |
| 2 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth and as per direction of the Engineer-in-Charge |
| 3 | Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete. |
| 4 | Providing, supplying, filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalty, taxes of all materials with all labour, T&P etc., complete. |
| 5 | Cement concrete of proportion (1:4:8) in F&F using 40mm size hbg metal of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect . |
| 6 | R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including centering & shuttering and, T&P,Labour ,Materials Roylity etc complete. |
| 7 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge. |
| 8 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete in ground floor. |
| 9 | Columns |
| 10 | Plinth Beam |
| 11 | Lintel |
| 12 | Roof Beam |
| 13 | Roof Slab |
| 14 | 4 cm thick grading concrete (1:2:4) on roof slab using 12mm & down graded black granite chips. |
| 15 | Fly ash bricks of 23Cm. x 12 Cm. x 8 Cm. size having crushing slrength not less than 75 Kg./Cm2 with cement mortar (1:6) in superstructure including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect. |
| 16 | up to plinth |
| 17 | Super structure |
| 18 | 12mm thick cement plaster in cm (1:6) finished smooth to brick masonry including racking out joints including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect. |
| 19 | 16mm thick cement plaster in cm (1:6) finished smooth to brick masonry including racking out joints including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect. |
| 20 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shed including cost of all materials and labour with T&P etc complete. |
| 21 | supplying,fitting& fixing of M.S Grill including cost of all materials and labour with T&P etc complete. |
| 22 | Painting two coats with any approved paint including the cost of enamel paint for wood work & Iron work. |
| 23 | Supplying, fifting and fixing vetrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 with application of polymere modified quick set cement based water resistant adhesive conforming to IS:15477 OF 3MM thick bed and filling joints with white cement ofapproved quality including cost of all materials, takes labour T&P etc required for the work. |
| 24 | Fixing tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. |
| 25 | Supplying, fifting and fixing ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series )of approved make conforming to IS: 13755 with application of polymere modified quick set cement based water resistant adhesive conforming to IS:15477 OF 3MM thick bed and filling joints with white cement ofapproved quality including cost of all materials, takes labour T&P etc required for the work. |
| 26 | S/F/F of granite up to size 0.10sqm i.e up to 1'1\\" x 1'1\\" (10mm thick) in floors. |
| 27 | Supplying, fitting, & fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mm x 32mm x 2mm in 3 row in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. Data for 3.26 Rmt |
| 28 | Supplying, fitting and fixing up window(sliding type) made up aluminum section No.9778 as window fram, section No.4095, 4096 & 9777, 3994 as shutter frame with Stainless steel welded/ neated jali for preventation of mosquito/ insects etc. as panel fitted with rubber bending inculding locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 29 | Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by meand of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete. |
| 30 | Providing and laying factory made chamfered edge Cement concrete Paver block of requried strength 80mm thickness,made by tableveribratoty method to attain superior smooth finish using Upor equivalent mould, laid requried colour and patten over 75mm thivk compacted bed of coarse sand compacting and proper embedding/laying of interlocking Paver block in to the sand bedding layers through vibratory compaction by using plate vibrator filling the joints with sand and cutting of Paver block as per required size and patten finishing and sweeping extra sand in foot path,road pavement etc. with all cost of materials,labour T&P all etc complete. |
| 31 | Supplying the following Making Garden equipments inlcuidng fixing at work site etc. complete as per direction of EIC. |
| 32 | supplying & fitting of orissa pan (580x440mm) size of white glazzed viterious china ware ofvapproved standard quality with pair of glazed footrest and cemnt concrete concrete water seal (sulabh type) including cost of joining material etc.all complete |
| 33 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘P’ trap inclusive of ciestren,seat cover all complete set conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. |
| 34 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes (as per IS-15778-2007 of SDR-11 class-1 grade similar to ASTM D 2846) on the surface with proper clamping system, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 35 | 20mmCPVC PIPE |
| 36 | 25mm ASTM cpvc PIPE |
| 37 | Providing and fixing counter wash basin: White Vitreous china Wash basin size 560x455mm including full thread waste coupling but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 38 | Supplying all materials,labour and T&P for fixing automatic flushing cistern with a pair of cast iron /M.S. brackets complete with fittings and making required connection with the supply main with 12mm. dia PVC inlet pipe including cutting holes and making good to the damages etc.all complete as per specification. (excluding cost of cistern and all accessories.) (per each) |
| 39 | 5 ltrs capacity automatic flushing cistern:- |
| 40 | 1\\" extension nipple |
| 41 | 1.5\\"extension nipple |
| 42 | 110mm clamp |
| 43 | 110 mm pvc 45 bend |
| 44 | 110mm pvc cowl |
| 45 | bath room jally |
| 46 | 50mm elbow |
| 47 | 75mm elbow |
| 48 | 75mm pvc 45 bend |
| 49 | 75mm pvc door elbow |
| 50 | 75mm pvc elbow |
| 51 | 75mm pvc pipe |
| 52 | 1H.P pumpset, Head discharge of 80mtr and 2lps respectively including all and its accessories and fixing etc. complete. |
| 53 | 1000 Lts Capacity PVC Tank(ISI Mark) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender