Tender For Special Repairs To Bldg No T-25 And T-26 In ‘P Zone And Addn/Altn To Bldg No Op/T-137 Of Bn Ration Store In ‘P Zone At Rms
Tender Value
43 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
16 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No T-25 And T-26 In ‘P Zone And Addn/Altn To Bldg No Op/T-137 Of Bn Ration Store In ‘P Zone At Rms
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs pre-painted galvalume aluminum zinc coating GI based corrugated trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 2 | S&F in repairs pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including dismantling of old iron or mild steel work from its position of any description complete all as specified and as directed. |
| 4 | S & F Joist, channel, angle, or tee sections Fe 410-W (Gde E- 250) quality A ,fixed independently, without connecting plates, etc. (cut to ordinary lengthsi.e. within 20mm of the length indicated) including dismantling of old iron or mild steel work from its position of any description complete all as specified and as directed. |
| 5 | S & F 2nd class hard wood scantling as in framed work etc clean sawn complete including dismantling of old one from its position all as specified and directed. |
| 6 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 7 | M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers finished even and smooth without using extra cement and surfaces finished even and smooth (without using extra cement) including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including provision of GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. |
| 8 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in Cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 9 | M&L for Rendering 15 mm thk in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished fair and even without using extra cement complete all as specified and as directed. |
| 10 | M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 12 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of old brick work from its position complete all as specified and as directed. |
| 13 | M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work from its position complete all as specified and as directed. |
| 14 | M&L for Rendering 15 mm thk in CM (1:6) on fair face of brick-work or concrete surface to be finished fair and even without using extra cement complete all as specified and as directed. |
| 15 | M&L for Rendering 15 mm thick in CM (1:4) other than fair face of brick-work , finished the surfaces fair and even without using extra cement complete all as specified and as directed. |
| 16 | M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer of approved shade on walls complete all as specified and as directed. |
| 17 | M&L for preparation of old plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer of approved shade on walls complete all as specified and as directed. |
| 18 | M&L for preparation of new plastered or un plastered surface of walls and applying two coats of oil bound distemper over and including a coat of primer of approved shade on walls complete all as specified and as directed. |
| 19 | M&L for applying two coats of oil bound distemper over and including a coat of primer of approved shade on old plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 20 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of redoxide primer on new surfaces in any tint complete all as specified and as directed. |
| 21 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. |
| 22 | M&L for preparation of old Wood work of any description over 10 cm width or girth not otherwise described and but applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. |
| 23 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 24 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 25 | S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and as directed. |
| 26 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 27 | S&F factory made second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and as directed. |
| 28 | S & F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed by the Engineer-in-Charge |
| 29 | S&F sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 30 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 31 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. |
| 32 | M&L for PCC (1:4:8) type D-2, 75 mm thick (using 40mm graded stone agg) as in sub base complete all as specified and as directed. |
| 33 | M&L for machine pressed precast concrete interlocking paver block any shape & size conforming to IS15658-2006 of 80mm thickness M-40 grade using grey cement & pigment laid over and including 50 mm thick sand cushioning including watering and consolidation for laying interlocking blocks etc complete all as specified and as directed. |
| 34 | M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor including demolition of old cement concrete of any description complete all as specified and as directed. |
| 35 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone floor/steps treads including rubbing and polishing including demolition of old tiles/slab including cement mortar bedding of any description complete all as specified and as directed. |
| 36 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and as directed. |
| 37 | M & L for PCC 40 mm thick type B-1, (1:2:4) (using 20 mm graded stone aggregate) as in levelling course of floor complete all as specified and as directed. |
| 38 | S&F 100 size stainless steel butt hinges complete all as specified and as directed. |
| 39 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 40 | S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 41 | S&F in repairs GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. |
| 42 | S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I with and including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. |
| 43 | S&F in repairs GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed. |
| 44 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and as directed. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 46 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 49 | M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 50 | S&F Pressed steel frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,with and including filling hollow of frame with PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) complete all as specified and as directed. |
| 51 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (without sash bar ) edges of framing plain, camfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I section 8 clause 8.42(a) supplied and fitted to chowkat complete all as specified and as directed. |
| 52 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 53 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 54 | M&L for providing Machine cut ,mirror polished kota stone slab 20-25mm thick over and including 10mm thick baking coat in CM (1:4) on vertical surfaces , in risers of steps, dados, and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing complete all as specified and as directed. |
| 55 | Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | M&L for TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 57 | M&L for RCC (Nominal Mix) (1:1.5:3) type A-1 (using 20mm graded stone aggregates) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 58 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams complete all as specified and as directed. |
| 59 | Use and waste of formwork to chajjas, troughts and similar items including edges complete all as specified and as directed. |
| 60 | S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed. |
| 61 | M&L for 1.5 mm thick Birla white putty/JK white wall care putty (in two layers) on walls complete all as specified and as directed. |
| 62 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia complete all as specified and as directed. |
| 63 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut exc 30cm long and dia 25mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 64 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut exc 30cm long and dia 25mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender