Tender For Provn Of Mt Shed At Fatehgunj Area,Eme School,Vadodara.
Tender Value
38.03 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
76060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Mt Shed At Fatehgunj Area,Eme School,Vadodara.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. excc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil |
| 2 | Excavation in trenches n.exc 1.5m depth & not exc 1.5m in width for foundation in trenches n.exc 10 sqm plan & getting out soft soil all as specified and directed. |
| 3 | M & L for providing PCC 1:4:8 type D2 using 40 mm graded stone aggreagate as in posts and foundation all as specified and directed. |
| 4 | Use and waste of formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterr all as speciified and directed |
| 5 | Use and waste of formwork to sides of pillars, posts, columns etc in square, rectangular and similar work fair finished surface complete all as directed. |
| 6 | M&L for reinforcement cement concrete (nominal mix) Type B1, 1:2:4 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | M&L for reinforcement cement concrete (nominal mix) Type B1, 1:2:4 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 8 | M&L for TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 9 | Supply and fix TMT bars 8 to 10 mm dia, as in stirrups cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A, joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and directed. |
| 11 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Gde E-250) quality - A,., complete all as specified and directed. |
| 12 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 13 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A,Plates(plain or chequered) channels,square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment, complete all as specified and directed. |
| 14 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 15 | M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ Valley Gutter, fixed with self tapping screws/ angle frame as specified |
| 16 | M&L two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces. |
| 17 | M & L for Hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 18 | M&L PCC 100mm thick type C-2, 1:3:6, using 40 mm graded stone aggregrate in sub base of hardstanding/flooring finished even & fair including use and waste of necessary formwork of complete all as specified and directed. |
| 19 | M&L PCC 100mm thick 1:2:4 Type B1 using 20 mm graded stone aggregrate in hardstandig/ flooring surfaces finished even & fair without using extra cement including use and waste of necessary formwork complete all as specified and directed. |
| 20 | M&L for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, GradeB complete all as specified and directed. |
| 21 | M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed. |
| 22 | M&L Brick work with sub class 'B' Bricks burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 23 | M & L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement complete all as specified and directed. Note - WPC shall be measured and paid separately as supply only. |
| 24 | Supply Only Integral water proofing compound. |
| 25 | M&L for rendering 10 mm thick cement plaster on brick/concrete surfaces etc in cement mortar 1:6 and finished even and smooth without using extra cement all as specified and directed. |
| 26 | M&L for preparation of new plastered surface and applying two coats of cement based paint over a coat of alkali resitant primer complete all as specfied and directed by the Engr-in-Charge. |
| 27 | Material & Labour for preparing new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 28 | Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft To Loose Soil complete all as specefied and directed. |
| 29 | Removing excavated material(soil) exc. 250 m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed . |
| 30 | M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green . |
| 31 | For one light point controlled by one switch all as directed by Engr-in-charge |
| 32 | Supply and fix of LED light fitting 1X20Watt, 220 Volt AC , input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9, decorative box type with drivers, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed. Note : Warrenty on light should be of minimum 03 Years. |
| 33 | Supply, laying, commissioning and testing of 16 sq mm 2 core XLPE insulated, screened, PVC bedded, galvanised steel wire armoured heavy duty electric power cable with aluminium conductor, suitable for 1100 volts grade, in trenches , ducts,pipe on wall and poles complete all as specified and directed by Engineer- in -charge |
| 34 | M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified. |
| 35 | M & L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise all as directed |
| 36 | S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed |
| 37 | S & F MCB single pole, having rupturing 10KA, 6 amps to 32 amps as ordered 240 Volts |
| 38 | S & F MCB Single pole and neutral (SPN), having rupturing 10KA, 240 V 63 amps as ordered. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender