Tender For Balance Work Of New R And Lift And Staircase Block In Igmc Hospital Shimla.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jul 2026
4 days left
EMD
2.08 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Of New R And Lift And Staircase Block In Igmc Hospital Shimla.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Glazing of Toughened reflected glass 6mm thick glazing either in steel /aluminium or UPVC frame as per Standard detall of blue ray'shade ST-767 of Saint Gobain or equivalent with. Nut, Epoxy, water proofing compound and fixing arrangements completeas per direction of Engineer in Charge: |
| 2 | Providing and fixing 0.60mm thick Colour coated steel sheet Tata Durashine /JSW or equivelant in roofing with hot dipped metallic, zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts.6mm.dia meter with prepainted limpet and rubber washers complete.with all accesoriees. as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts. |
| 3 | Providing and Fixing-High Tensile Carbon Steel-10.9 grade bolts including nuts and washer. complete in structural members joint plates etc as per structural members joint plates etc. as per structural drawing and directions of engineer in charge |
| 4 | Providing and fixing roofing consist of 0.8 mm thick Gl Steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100*100 mm grid including edge trim covered with concrete the metal deck will be supported on structural beam with shear studs complete as per direction of engineer in charge |
| 5 | Drilling Suiltable holes in M.S. Base plate, joints plates with power driven drill machine upto thickness of 25mm complete as per direction of Enginee. |
| 6 | Providing & Grouting of dowel tubes of precast members and basse plates with Non shrink grout of approved make by suitable means curing complete as per direction of Engineer in Charge. |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facías and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, inixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete. |
| 8 | Providing and fixing M.S.B.P. sheet 2mm in eaves board/ornamental facia / soffit & ceilings including cutting, welding and applying a coat of red lead primer etc. complete as per the instruction of Engineer in charge including carrage of material in all leads and lifts |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Flashings/ Aprons (Upto 600 mm) Tata Durashine. including carriage of materials within all leads and lifts. |
| 10 | Providing valleys 90 cm over-all inplain G.I. sheets fixed with galvanised iron Jor L.hooks.. bolts and nuts 8mm dia G.I. limpetand bitumen washers complete:- 0.63 mm thick sheet. including carriage of materials within all leads and lifts. |
| 11 | Providing and laying 60 mm thick factory made cement concrete paver block of approved shape and colour of M -40 grade made of C&D waste by block making machine with vibratory, compaction laid in required pattern and including over 50mm thick.compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge |
| 12 | Providing and fixing 6mm thick Timex bond /Allcor makeor ite equivalent HPL Cladding from thick over framing of 1\\"*1.5\\" aluminium box section the Section are to be place 600mm c/c. The edges to be covered properly and gaps to be filled with approved water proof sealent. Complete with aluminium profile double tape and silicon stixallin including carriage of materials in all leads and lifts.in all respects as per the design and instruction of Engineer in Charge. Calominium Paid Seporetely in kg) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender