Tender For Premansoon Maintenance Work Oiling, Greasing Of 78 Gates Of 41No. Of Minor Irrigation Tank In Subdivision Amla, Pattan And Atner Under Wrd Multai Dist. Betul
Tender Value
5.23 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
10465
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Premansoon Maintenance Work Oiling, Greasing Of 78 Gates Of 41No. Of Minor Irrigation Tank In Subdivision Amla, Pattan And Atner Under Wrd Multai Dist. Betul
BOQ
| Sl. No. | Item Description |
| 1 | Providing Casting machining and assembling of Cast Iron Items for Tank, canal, barrage, stop dam gates as CI wedges with suitable L-end key nut bolts, CI couplings, CI guides, assembly complete as per drawing with testing ,including cost of all materials, with machinery, labour, cutting, aligning, welding, finishing, cleaning, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding charges for structural steel components and other materials. CI couplings, Guides, etc. |
| 2 | Providing of High tensile MS Nut Bolts of Required size and type as per specification with testing, including all lead and lifts, packaging and forwarding charges for all components etc complete. |
| 3 | Providing and fixing work of Head Stock Chuck nut of required size (For M-75/M-70/S-36 type head stock ) complete work at site. |
| 4 | Providing and fixing work of Thrust ball Bearing of required size for canal/sluice gates complete work at site. |
| 5 | Providing and fixing work of Head Stock Cap. For (M-75/M-70/S-36 type head stock ) complete work at site. |
| 6 | Providing of gate operating handle for screw jack hoisting complete work at site. |
| 7 | Allen Key Bolt |
| 8 | Oiling and greasing work of gate parts like head stock parts, Roller assembley, Operating Rod, etc. For Gate size upto 1.0mx1.0m |
| 9 | Oiling and greasing work of gate parts like head stock parts, Roller assembley, Operating Rod, etc. For Gate size above 1.0mx1.0m |
| 10 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm |
| 11 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm |
| 12 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.10x60 mm Supplying at site: |
| 14 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.10x120 mm Supplying at site: |
| 15 | Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) |
| 16 | Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. |
| 17 | Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. |
| 20 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender