Tender For Supply, Installation, Testing and Commissioning Of Smoke Management And Sprinkler System In The Basement At Fci Headquarters Building, New Delhi.
Tender Value
22.32 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
44700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing and Commissioning Of Smoke Management And Sprinkler System In The Basement At Fci Headquarters Building, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete asrequired. |
| 2 | Thickness 0.63 mm sheet |
| 3 | Thickness 0.80 mm sheet |
| 4 | Supplying installation testing and commissioning of industrial Axial Flow Fans of 24 inch size, casing made from mild steel with burd screen gard, having 600 mm dia fan blade with 1HP 3 phase 1440RPM TEFC IP 66 induction motor suitable for operation on 440V 50Hz AC supply, less than 80DB noise level i/c fixing/hanging arrangement from ceiling etc complete as required. 6000 Cfm |
| 5 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 6 | 4 way (4 + 12), Double door |
| 7 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 8 | Double pole |
| 9 | Triple pole and neutral |
| 10 | Supplying and drawing following sizes of XLPE insulated aluminium armoured conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 11 | 3X 4 sq mm |
| 12 | 4X 10 sq mm |
| 13 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 14 | Providing pressurization fan control unit suitable for conventional type EFA system unit consisting of 1no 24V 8 pin plug in type PCB mount with input & output connector relay,18 gauge duly powder coted MS box size 8'x6'x4' with 24V SMPS 5A power supply & fixing on wall with suitable size of fastener, connection with existing ventilation stater panels to EFA system etc. complete as a required |
| 15 | Providing & fixing DOL starter suitable for 1 HP with overload relay range 1.5 - 2.5 Amp range suitable for operation on 415 V 50 Hz 3 phase AC supply i/c fixing arrangement on wall with dash fastener connections, testing, commissioning etc. complete as reqd. |
| 16 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.(a) 10 Zone |
| 17 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 18 | Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 19 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 20 | Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. |
| 21 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. |
| 22 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 23 | 25 mm dia |
| 24 | 32 mm dia |
| 25 | 50 mm dia |
| 26 | 80 mm da |
| 27 | 100 mm dia |
| 28 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 0C with required accessories : |
| 29 | Pendent Sprinkler |
| 30 | Upright sprinkler |
| 31 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 32 | 50 mm dia |
| 33 | 100 mm dia |
| 34 | Cat (B) - Buy Back Items |
| 35 | Old/obsolete dismantled pipes and other allied items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender